diff --exclude-from=/home/dang/.diffrc -u -ruN logrotate-3.7.1.orig/logrotate.8 logrotate-3.7.1/logrotate.8 --- logrotate-3.7.1.orig/logrotate.8 2003-08-07 07:13:14.000000000 -0400 +++ logrotate-3.7.1/logrotate.8 2005-09-14 15:00:46.000000000 -0400 @@ -3,7 +3,8 @@ .SH NAME logrotate \- rotates, compresses, and mails system logs .SH SYNOPSIS -\fBlogrotate\fR [-dv] [-f|--force] [-s|--state \fIfile\fR] \fIconfig_file\fR+ +\fBlogrotate\fR [\fB\-dv\fR] [\fB\-f\fR|\fB\-\-force\fR] +[\fB\-s\fR|\fB-\-state\ \fIstatefile\fR] \fIconfig_file\fR .. .SH DESCRIPTION \fBlogrotate\fR is designed to ease administration of systems that generate large numbers of log files. It allows automatic rotation, compression, @@ -11,16 +12,16 @@ weekly, monthly, or when it grows too large. .P Normally, \fBlogrotate\fR is run as a daily cron job. It will not modify -a log multiple times in one day unless the criterium for that log is -based on the log's size and \fBlogrotate\fR is being run multiple times -each day, or unless the \fB-f\fR or \fB-force\fR option is used. +a log more than once in one day unless the criterion for that log is +based on the log's size and \fBlogrotate\fR is being run more than once +each day, or unless the \fB-f\fR or \fB-\-force\fR option is used. .P Any number of config files may be given on the command line. Later config files may override the options given in earlier files, so the order -in which the \fBlogrotate\fR config files are listed in is important. +in which the \fBlogrotate\fR config files are listed is important. Normally, a single config file which includes any other config files which are needed should be used. See below for more information on how -to use the \fIinclude\fR directive to accomplish this. If a directory +to use the \fBinclude\fR directive to accomplish this. If a directory is given on the command line, every file in that directory is used as a config file. .P @@ -36,14 +37,15 @@ be made to the logs or to the \fBlogrotate\fR state file. .TP -\fB-f, -\-force\fR +\fB-f\fR, \fB-\-force\fR Tells \fBlogrotate\fR to force the rotation, even if it doesn't think this is necessary. Sometimes this is useful after adding new entries to -\fBlogrotate\fR, or if old log files have been removed by hand, as the -new files will be created, and logging will continue correctly. +a \fBlogrotate\fR config file, or if old log files have been removed +by hand, as the new files will be created, and logging will continue +correctly. .TP -\fB-m, -\-mail \fR +\fB-m\R, \B-\-mail \fR Tells \fBlogrotate\fR which command to use when mailing logs. This command should accept two arguments: 1) the subject of the message, and 2) the recipient. The command must then read a message on standard input @@ -51,22 +53,26 @@ -s\fR. .TP -\fB-s, -\-state \fR +\fB-s\fR, \fB-\-state \fR Tells \fBlogrotate\fR to use an alternate state file. This is useful -if logrotate is being run as a different user for various sets of -log files. The default state file is \fI/var/lib/logrotate/status\fR. +if \fBlogrotate\fR is being run as a different user for various sets of +log files. The default state file is \fI/var/lib/logrotate.status\fR. .TP \fB-\-usage\fR Prints a short usage message. +.TP +\fB-v\fR, \fB--verbose\fR +Display messages during rotation. + .SH CONFIGURATION FILE \fBlogrotate\fR reads everything about the log files it should be handling from the series of configuration files specified on the command line. Each configuration file can set global options (local definitions override global ones, and later definitions override earlier ones) and specify -a logfile to rotate. A simple configuration file looks like this: +some logfiles to rotate. A simple configuration file looks like this: .nf .ta +3i @@ -77,17 +83,17 @@ rotate 5 weekly postrotate - /sbin/killall -HUP syslogd + /bin/killall -HUP syslogd endscript } "/var/log/httpd/access.log" /var/log/httpd/error.log { rotate 5 mail www@my.org - size=100k + size 100k sharedscripts postrotate - /sbin/killall -HUP httpd + /bin/killall -HUP httpd endscript } @@ -97,7 +103,7 @@ olddir /var/log/news/old missingok postrotate - kill -HUP `cat /var/run/inn.pid` + kill -HUP `cat /var/run/inn.pid` endscript nocompress } @@ -107,23 +113,23 @@ The first few lines set global options; in the example, logs are compressed after they are rotated. Note that comments may appear anywhere in the config file as long as the first non-whitespace -character on the line is a #. +character on the line is a \fB#\fR. -The next section of the config files defined how to handle the log file +The next section of the config file defines how to handle the log file \fI/var/log/messages\fR. The log will go through five weekly rotations before being removed. After the log file has been rotated (but before the old version of the log has been compressed), the command -\fI/sbin/killall -HUP syslogd\fR will be executed. +\fI/bin/killall -HUP syslogd\fR will be executed. The next section defines the parameters for both \fI/var/log/httpd/access.log\fR and \fI/var/log/httpd/error.log\fR. -They are rotated whenever is grows over 100k is size, and the old logs +Each is rotated whenever it grows over 100k is size, and the old log files are mailed (uncompressed) to www@my.org after going through 5 rotations, rather then being removed. The \fBsharedscripts\fR means that the \fBpostrotate\fR script will only be run once, not once for each -log which is rotated. Note that the double quotes around the first filename -at the beginning of this section allows logrotate to rotate logs with -spaces in the name. Normal shell quoting rules apply, with ', ", and \\ +log which is rotated. Note that log file names may be enclosed in +quotes (and that quotes are required if the name contains spaces). +Normal shell quoting rules apply, with \fB'\fR, \fB"\fR, and \fB\\\fR characters supported. The last section defines the parameters for all of the files in @@ -135,29 +141,33 @@ rotate all files, including previously rotated ones. A way around this is to use the \fBolddir\fR directive or a more exact wildcard (such as *.log). +If the directory \fI/var/log/news\fR does not exist, this will cause +\fBlogrotate\fR to report an error. This error cannot be stopped with +the \fBmissingok\fR directive. + Here is more information on the directives which may be included in a \fBlogrotate\fR configuration file: .TP \fBcompress\fR -Old versions of log files are compressed with \fBgzip\fR by default. See also -\fBnocompress\fR. +Old versions of log files are compressed with \fBgzip\fR(1) by default. +See also \fBnocompress\fR. .TP \fBcompresscmd\fR Specifies which command to use to compress log files. The default is -\fBgzip\fR. See also \fBcompress\fR. +\fBgzip\fR(1). See also \fBcompress\fR. .TP \fBuncompresscmd\fR Specifies which command to use to uncompress log files. The default is -\fBgunzip\fR. +\fBgunzip\fR(1). .TP \fBcompressext\fR Specifies which extension to use on compressed logfiles, if compression -is enabled. The default follows that of the configured compression -command. +is enabled. The default follows that of the default compression +command (.gz). .TP \fBcompressoptions\fR @@ -174,9 +184,9 @@ .TP \fBcopytruncate\fR -Truncate the original log file in place after creating a copy, -instead of moving the old log file and optionally creating a new one, -It can be used when some program can not be told to close its logfile +Truncate the original log file to zero size in place after creating a copy, +instead of moving the old log file and optionally creating a new one. +It can be used when some program cannot be told to close its logfile and thus might continue writing (appending) to the previous log file forever. Note that there is a very small time slice between copying the file and truncating it, so some logging data might be lost. @@ -188,7 +198,7 @@ Immediately after rotation (before the \fBpostrotate\fR script is run) the log file is created (with the same name as the log file just rotated). \fImode\fR specifies the mode for the log file in octal (the same -as \fBchmod(2)\fR), \fIowner\fR specifies the user name who will own the +as \fBchmod\fR)(2), \fIowner\fR specifies the user name who will own the log file, and \fIgroup\fR specifies the group the log file will belong to. Any of the log file attributes may be omitted, in which case those attributes for the new file will use the same values as the original log @@ -202,20 +212,20 @@ .TP \fBdelaycompress\fR Postpone compression of the previous log file to the next rotation cycle. -This has only effect when used in combination with \fBcompress\fR. -It can be used when some program can not be told to close its logfile +This only has effect when used in combination with \fBcompress\fR. +It can be used when some program cannot be told to close its logfile and thus might continue writing to the previous log file for some time. .TP \fBextension \fIext\fR Log files are given the final extension \fIext\fR after rotation. If -compression is used, the compression extension (normally \fB.gz\fR) +compression is used, the compression extension (normally \fI.gz\fR) appears after \fIext\fR. .TP \fBifempty\fR -Rotate the log file even if it is empty, overiding the \fBnotifempty\fR -option (ifempty is the default). +Rotate the log file even if it is empty, overriding the \fBnotifempty\fR +option (\fBifempty\fR is the default). .TP \fBinclude \fIfile_or_directory\fR @@ -226,12 +236,12 @@ which are ignored are files which are not regular files (such as directories and named pipes) and files whose names end with one of the taboo extensions, as specified by the \fBtabooext\fR directive. -The \fBinclude\fR directive may not appear inside of a log file +The \fBinclude\fR directive may not appear inside a log file definition. .TP \fBmail \fIaddress\fR -When a log is rotated out-of-existence, it is mailed to \fIaddress\fR. If +When a log is rotated out of existence, it is mailed to \fIaddress\fR. If no mail should be generated by a particular log, the \fBnomail\fR directive may be used. @@ -257,8 +267,7 @@ .TP \fBnocompress\fR -Old versions of log files are not compressed with \fBgzip\fR. See also -\fBcompress\fR. +Old versions of log files are not compressed. See also \fBcompress\fR. .TP \fBnocopy\fR @@ -281,7 +290,7 @@ .TP \fBnomail\fR -Don't mail old log files to any address. +Do not mail old log files to any address. .TP \fBnomissingok\fR @@ -289,12 +298,12 @@ .TP \fBnoolddir\fR -Logs are rotated in the same directory the log normally resides in (this +Logs are rotated in the directory they normally reside in (this overrides the \fBolddir\fR option). .TP \fBnosharedscripts\fR -Run \fBprerotate\fR and \fBpostrotate\fR scripts for every script which +Run \fBprerotate\fR and \fBpostrotate\fR scripts for every log which is rotated (this is the default, and overrides the \fBsharedscripts\fR option). @@ -315,16 +324,15 @@ \fBpostrotate\fR/\fBendscript\fR The lines between \fBpostrotate\fR and \fBendscript\fR (both of which must appear on lines by themselves) are executed after the log file is -rotated. These directives may only appear inside of a log file definition. -See \fBprerotate\fR as well. +rotated. These directives may only appear inside a log file definition. +See also \fBprerotate\fR. .TP \fBprerotate\fR/\fBendscript\fR The lines between \fBprerotate\fR and \fBendscript\fR (both of which must appear on lines by themselves) are executed before the log file is rotated and only if the log will actually be rotated. These directives -may only appear inside of a log file definition. See \fBpostrotate\fR -as well. +may only appear inside a log file definition. See also \fBpostrotate\fR. .TP \fBfirstaction\fR/\fBendscript\fR @@ -340,30 +348,31 @@ must appear on lines by themselves) are executed once after all log files that match the wildcarded pattern are rotated, after postrotate script is run and only if at least one log is rotated. These directives may only -appear inside of a log file definition. See \fBlastaction\fR as well. +appear inside a log file definition. See also \fBfirstaction\fR. .TP \fBrotate \fIcount\fR -Log files are rotated times before being removed or mailed to the +Log files are rotated \fIcount\fR times before being removed or mailed to the address specified in a \fBmail\fR directive. If \fIcount\fR is 0, old versions are removed rather then rotated. .TP -\fBsize \fIsize\fR +\fBsize \fIsize\fR[\fBG\fR|\fBM\fR|\fBk\fR] Log files are rotated when they grow bigger then \fIsize\fR bytes. If \fIsize\fR is followed by \fIM\fR, the size if assumed to be in megabytes. -If the \fIk\fR is used, the size is in kilobytes. So \fBsize 100\fR, -\fIsize 100k\fR, and \fIsize 100M\fR are all valid. +If the \fIG\fR suffix is used, the size is in gigabytes. +If the \fIk\fR suffix is used, the size is in kilobytes. So \fBsize 100\fR, +\fIsize 100k\fR, \fIsize 100M\fR and \fIsize 1G\fR are all valid. .TP \fBsharedscripts\fR -Normally, \fBprescript\fR and \fBpostscript\fR scripts are run for each +Normally, \fBprerotate\fR and \fBpostrotate\fR scripts are run for each log which is rotated, meaning that a single script may be run multiple times for log file entries which match multiple files (such as the -/var/log/news/* example). If \fBsharedscript\fR is specified, the scripts +\fI/var/log/news/*\fR example). If \fBsharedscript\fR is specified, the scripts are only run once, no matter how many logs match the wildcarded pattern. However, if none of the logs in the pattern require rotating, the scripts -will not be run at all. This option overrides the \fbnosharedscripts\fR +will not be run at all. This option overrides the \fBnosharedscripts\fR option. .TP @@ -377,34 +386,40 @@ .TP \fBtabooext\fR [+] \fIlist\fR The current taboo extension list is changed (see the \fBinclude\fR directive -for information on the taboo extensions). If a + precedes the list of -extensions, the current taboo extension list is augmented, otherwise it +for information on the taboo extensions). If a \fB+\fR precedes \fIlist\fR, +the current taboo extension list is augmented by \fIlist\fR, otherwise it is replaced. At startup, the taboo extension list -contains .rpmorig, .rpmsave, ,v, .swp, .rpmnew, and ~. +contains .rpmorig, .rpmsave, ,v, .swp, .rpmnew, and ~. Note that all hidden +files (files starting with .) are ignored. + .TP \fBweekly\fR Log files are rotated if the current weekday is less then the weekday of the last rotation or if more then a week has passed since the last rotation. This is normally the same as rotating logs on the first day -of the week, but it works better if \fIlogrotate\fR is not run every -night. +of the week, but if \fBlogrotate\fR is not being run every night a log +rotation will happen at the first valid opportunity. .SH FILES .PD 0 .TP 27 -\fI/var/lib/logrotate/status\fR +\fI/var/lib/logrotate.status\fR Default state file. .TP 27 \fI/etc/logrotate.conf\fR Configuration options. .SH SEE ALSO -.IR gzip (1) +.BR gzip (1) .SH AUTHORS .nf Erik Troan .nf Preston Brown +.nf +Corrections and changes for Debian by Paul Martin +.nf +Corrections and changes for Gentoo by Daniel Gryniewicz .fi