# Copyright 1999-2006 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/linux-info.eclass,v 1.70 2009/09/06 23:41:42 robbat2 Exp $
#
# Original author: John Mylchreest <johnm@gentoo.org>
# Maintainer: kernel-misc@gentoo.org
#
# Please direct your bugs to the current eclass maintainer :)

# @ECLASS: linux-info.eclass
# @MAINTAINER:
# kernel-misc@gentoo.org
# @BLURB: eclass used for accessing kernel related information
# @DESCRIPTION:
# This eclass is used as a central eclass for accessing kernel
# related information for source or binary already installed.
# It is vital for linux-mod.eclass to function correctly, and is split
# out so that any ebuild behaviour "templates" are abstracted out
# using additional eclasses.
#
# "kernel config" in this file means:
# The .config of the currently installed sources is used as the first
# preference, with a fall-back to bundled config (/proc/config.gz) if available.

# A Couple of env vars are available to effect usage of this eclass
# These are as follows:

# @ECLASS-VARIABLE: KERNEL_DIR
# @DESCRIPTION:
# A string containing the directory of the target kernel sources. The default value is
# "/usr/src/linux"

# @ECLASS-VARIABLE: CONFIG_CHECK
# @DESCRIPTION:
# A string containing a list of .config options to check for before
# proceeding with the install.
#
#   e.g.: CONFIG_CHECK="MTRR"
#
# You can also check that an option doesn't exist by
# prepending it with an exclamation mark (!).
#
#   e.g.: CONFIG_CHECK="!MTRR"
#
# To simply warn about a missing option, prepend a '~'. 
# It may be combined with '!'.
#
# In general, most checks should be non-fatal. The only time fatal checks should
# be used is for building kernel modules or cases that a compile will fail
# without the option.
#
# This is to allow usage of binary kernels, and minimal systems without kernel
# sources.

# @ECLASS-VARIABLE: ERROR_<CFG>
# @DESCRIPTION:
# A string containing the error message to display when the check against CONFIG_CHECK
# fails. <CFG> should reference the appropriate option used in CONFIG_CHECK.
#
#   e.g.: ERROR_MTRR="MTRR exists in the .config but shouldn't!!"

# @ECLASS-VARIABLE: KBUILD_OUTPUT
# @DESCRIPTION:
# A string passed on commandline, or set from the kernel makefile. It contains the directory
# which is to be used as the kernel object directory.

# There are also a couple of variables which are set by this, and shouldn't be
# set by hand. These are as follows:

# @ECLASS-VARIABLE: KV_FULL
# @DESCRIPTION:
# A read-only variable. It's a string containing the full kernel version. ie: 2.6.9-gentoo-johnm-r1

# @ECLASS-VARIABLE: KV_MAJOR
# @DESCRIPTION:
# A read-only variable. It's an integer containing the kernel major version. ie: 2

# @ECLASS-VARIABLE: KV_MINOR
# @DESCRIPTION:
# A read-only variable. It's an integer containing the kernel minor version. ie: 6

# @ECLASS-VARIABLE: KV_PATCH
# @DESCRIPTION:
# A read-only variable. It's an integer containing the kernel patch version. ie: 9

# @ECLASS-VARIABLE: KV_EXTRA
# @DESCRIPTION:
# A read-only variable. It's a string containing the kernel EXTRAVERSION. ie: -gentoo

# @ECLASS-VARIABLE: KV_LOCAL
# @DESCRIPTION:
# A read-only variable. It's a string containing the kernel LOCALVERSION concatenation. ie: -johnm

# @ECLASS-VARIABLE: KV_DIR
# @DESCRIPTION:
# A read-only variable. It's a string containing the kernel source directory, will be null if
# KERNEL_DIR is invalid.

# @ECLASS-VARIABLE: KV_OUT_DIR
# @DESCRIPTION:
# A read-only variable. It's a string containing the kernel object directory, will be KV_DIR unless
# KBUILD_OUTPUT is used. This should be used for referencing .config.

# @ECLASS-VARIABLE: I_KNOW_WHAT_I_AM_DOING
# @DESCRIPTION:
# Temporary variable for the migration to making linux-info non-fatal.

# And to ensure all the weirdness with crosscompile
inherit toolchain-funcs versionator

EXPORT_FUNCTIONS pkg_setup

DEPEND=""
RDEPEND=""

[ -z "${I_KNOW_WHAT_I_AM_DOING}" ] && \
DEPEND="kernel_linux? ( virtual/linux-sources )"

# Overwritable environment Var's
# ---------------------------------------
KERNEL_DIR="${KERNEL_DIR:-${ROOT}usr/src/linux}"


# Bug fixes
# fix to bug #75034
case ${ARCH} in
	ppc)	BUILD_FIXES="${BUILD_FIXES} TOUT=${T}/.tmp_gas_check";;
	ppc64)	BUILD_FIXES="${BUILD_FIXES} TOUT=${T}/.tmp_gas_check";;
esac

# @FUNCTION: set_arch_to_kernel
# @DESCRIPTION:
# Set the env ARCH to match what the kernel expects.
set_arch_to_kernel() { export ARCH=$(tc-arch-kernel); }
# @FUNCTION: set_arch_to_portage
# @DESCRIPTION:
# Set the env ARCH to match what portage expects.
set_arch_to_portage() { export ARCH=$(tc-arch); }

# qeinfo "Message"
# -------------------
# qeinfo is a quiet einfo call when EBUILD_PHASE
# should not have visible output.
qout() {
	local outputmsg type
	type=${1}
	shift
	outputmsg="${@}"
	case "${EBUILD_PHASE}" in
		depend)  unset outputmsg;;
		clean)   unset outputmsg;;
		preinst) unset outputmsg;;
	esac
	[ -n "${outputmsg}" ] && ${type} "${outputmsg}"
}

qeinfo() { qout einfo "${@}" ; }
qeerror() { qout eerror "${@}" ; }

# File Functions
# ---------------------------------------

# @FUNCTION: getfilevar
# @USAGE: variable configfile
# @RETURN: the value of the variable
# @DESCRIPTION:
# It detects the value of the variable defined in the file configfile. This is
# done by including the configfile, and printing the variable with Make.
# It WILL break if your makefile has missing dependencies!
getfilevar() {
local	ERROR basefname basedname myARCH="${ARCH}"
	ERROR=0

	[ -z "${1}" ] && ERROR=1
	[ ! -f "${2}" ] && ERROR=1

	if [ "${ERROR}" = 1 ]
	then
		echo -e "\n"
		eerror "getfilevar requires 2 variables, with the second a valid file."
		eerror "   getfilevar <VARIABLE> <CONFIGFILE>"
	else
		basefname="$(basename ${2})"
		basedname="$(dirname ${2})"
		unset ARCH

		echo -e "e:\\n\\t@echo \$(${1})\\ninclude ${basefname}" | \
			make -C "${basedname}" M="${S}" ${BUILD_FIXES} -s -f - 2>/dev/null

		ARCH=${myARCH}
	fi
}

# @FUNCTION: getfilevar_noexec
# @USAGE: variable configfile
# @RETURN: the value of the variable
# @DESCRIPTION:
# It detects the value of the variable defined in the file configfile.
# This is done with sed matching an expression only. If the variable is defined,
# you will run into problems. See getfilevar for those cases.
getfilevar_noexec() {
	local	ERROR basefname basedname mycat myARCH="${ARCH}"
	ERROR=0
	mycat='cat'

	[ -z "${1}" ] && ERROR=1
	[ ! -f "${2}" ] && ERROR=1
	[ "${2%.gz}" != "${2}" ] && mycat='zcat'

	if [ "${ERROR}" = 1 ]
	then
		echo -e "\n"
		eerror "getfilevar_noexec requires 2 variables, with the second a valid file."
		eerror "   getfilevar_noexec <VARIABLE> <CONFIGFILE>"
	else
		${mycat} "${2}" | \
		sed -n \
		-e "/^[[:space:]]*${1}[[:space:]]*=[[:space:]]*\(.*\)\$/{ 
			s,^[^=]*[[:space:]]*=[[:space:]]*,,g ;
			s,[[:space:]]*\$,,g ;
			p
		}"
	fi
}


# @FUNCTION: linux_config_src_exists
# @RETURN: true or false
# @DESCRIPTION:
# It returns true if .config exists in a build directory otherwise false
linux_config_src_exists() {
	[ -s "${KV_OUT_DIR}/.config" ]
}

# @FUNCTION: linux_config_bin_exists
# @RETURN: true or false
# @DESCRIPTION:
# It returns true if .config exists in /proc, otherwise false
linux_config_bin_exists() {
	[ -s "/proc/config.gz" ]
}

# @FUNCTION: linux_config_exists
# @RETURN: true or false
# @DESCRIPTION:
# It returns true if .config exists otherwise false
#
# This function MUST be checked before using any of the linux_chkconfig_*
# functions.
linux_config_exists() {
	linux_config_src_exists || linux_config_bin_exists
}

# @FUNCTION: require_configured_kernel
# @DESCRIPTION:
# This function verifies that the current kernel is configured (it checks against the existence of .config)
# otherwise it dies.
require_configured_kernel() {
	if ! linux_config_src_exists; then
		qeerror "Could not find a usable .config in the kernel source directory."
		qeerror "Please ensure that ${KERNEL_DIR} points to a configured set of Linux sources."
		qeerror "If you are using KBUILD_OUTPUT, please set the environment var so that"
		qeerror "it points to the necessary object directory so that it might find .config."
		die "Kernel not configured; no .config found in ${KV_OUT_DIR}"
	fi
}

# @FUNCTION: linux_chkconfig_present
# @USAGE: option
# @RETURN: true or false
# @DESCRIPTION:
# It checks that CONFIG_<option>=y or CONFIG_<option>=m is present in the current kernel .config
# If linux_config_exists returns false, the results of this are UNDEFINED. You
# MUST call linux_config_exists first.
linux_chkconfig_present() {
local	RESULT
	[ -z "${I_KNOW_WHAT_I_AM_DOING}" ] && require_configured_kernel
	local config
	config="${KV_OUT_DIR}/.config"
	[ ! -f "${config}" ] && config="/proc/config.gz"
	RESULT="$(getfilevar_noexec CONFIG_${1} "${config}")"
	[ "${RESULT}" = "m" -o "${RESULT}" = "y" ] && return 0 || return 1
}

# @FUNCTION: linux_chkconfig_module
# @USAGE: option
# @RETURN: true or false
# @DESCRIPTION:
# It checks that CONFIG_<option>=m is present in the current kernel .config
# If linux_config_exists returns false, the results of this are UNDEFINED. You
# MUST call linux_config_exists first.
linux_chkconfig_module() {
local	RESULT
	[ -z "${I_KNOW_WHAT_I_AM_DOING}" ] && require_configured_kernel
	local config
	config="${KV_OUT_DIR}/.config"
	[ ! -f "${config}" ] && config="/proc/config.gz"
	RESULT="$(getfilevar_noexec CONFIG_${1} "${config}")"
	[ "${RESULT}" = "m" ] && return 0 || return 1
}

# @FUNCTION: linux_chkconfig_builtin
# @USAGE: option
# @RETURN: true or false
# @DESCRIPTION:
# It checks that CONFIG_<option>=y is present in the current kernel .config
# If linux_config_exists returns false, the results of this are UNDEFINED. You
# MUST call linux_config_exists first.
linux_chkconfig_builtin() {
local	RESULT
	[ -z "${I_KNOW_WHAT_I_AM_DOING}" ] && require_configured_kernel
	local config
	config="${KV_OUT_DIR}/.config"
	[ ! -f "${config}" ] && config="/proc/config.gz"
	RESULT="$(getfilevar_noexec CONFIG_${1} "${config}")"
	[ "${RESULT}" = "y" ] && return 0 || return 1
}

# @FUNCTION: linux_chkconfig_string
# @USAGE: option
# @RETURN: CONFIG_<option>
# @DESCRIPTION:
# It prints the CONFIG_<option> value of the current kernel .config (it requires a configured kernel).
# If linux_config_exists returns false, the results of this are UNDEFINED. You
# MUST call linux_config_exists first.
linux_chkconfig_string() {
	[ -z "${I_KNOW_WHAT_I_AM_DOING}" ] && require_configured_kernel
	local config
	config="${KV_OUT_DIR}/.config"
	[ ! -f "${config}" ] && config="/proc/config.gz"
	getfilevar_noexec "CONFIG_${1}" "${config}"
}

# Versioning Functions
# ---------------------------------------

# @FUNCTION: kernel_is
# @USAGE: [-lt -gt -le -ge -eq] major_number [minor_number patch_number]
# @RETURN: true or false
# @DESCRIPTION:
# It returns true when the current kernel version satisfies the comparison against the passed version.
# -eq is the default comparison.
#
# @CODE
# For Example where KV = 2.6.9
# kernel_is 2 4   returns false
# kernel_is 2     returns true
# kernel_is 2 6   returns true
# kernel_is 2 6 8 returns false
# kernel_is 2 6 9 returns true
# @CODE

# got the jist yet?

kernel_is() {
	# if we haven't determined the version yet, we need to.
	linux-info_get_any_version

	local operator test value x=0 y=0 z=0

	case ${1} in
	  -lt|lt) operator="-lt"; shift;;
	  -gt|gt) operator="-gt"; shift;;
	  -le|le) operator="-le"; shift;;
	  -ge|ge) operator="-ge"; shift;;
	  -eq|eq) operator="-eq"; shift;;
	       *) operator="-eq";;
	esac

	for x in ${@}; do
		for((y=0; y<$((3 - ${#x})); y++)); do value="${value}0"; done
		value="${value}${x}"
		z=$((${z} + 1))

		case ${z} in
		  1) for((y=0; y<$((3 - ${#KV_MAJOR})); y++)); do test="${test}0"; done;
		     test="${test}${KV_MAJOR}";;
		  2) for((y=0; y<$((3 - ${#KV_MINOR})); y++)); do test="${test}0"; done;
		     test="${test}${KV_MINOR}";;
		  3) for((y=0; y<$((3 - ${#KV_PATCH})); y++)); do test="${test}0"; done;
		     test="${test}${KV_PATCH}";;
		  *) die "Error in kernel-2_kernel_is(): Too many parameters.";;
		esac
	done
	
	[ ${test} ${operator} ${value} ] && return 0 || return 1
}

get_localversion() {
	local lv_list i x

	# ignore files with ~ in it.
	for i in $(ls ${1}/localversion* 2>/dev/null); do
		[[ -n ${i//*~*} ]] && lv_list="${lv_list} ${i}"
	done

	for i in ${lv_list}; do
		x="${x}$(<${i})"
	done
	x=${x/ /}
	echo ${x}
}

# internal variable, so we know to only print the warning once
get_version_warning_done=

# @FUNCTION: get_version
# @DESCRIPTION:
# It gets the version of the kernel inside KERNEL_DIR and populates the KV_FULL variable
# (if KV_FULL is already set it does nothing).
#
# The kernel version variables (KV_MAJOR, KV_MINOR, KV_PATCH, KV_EXTRA and KV_LOCAL) are also set.
#
# The KV_DIR is set using the KERNEL_DIR env var, the KV_DIR_OUT is set using a valid
# KBUILD_OUTPUT (in a decreasing priority list, we look for the env var, makefile var or the
# symlink /lib/modules/${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}${KV_EXTRA}/build).
get_version() {
	local kbuild_output

	# no need to execute this twice assuming KV_FULL is populated.
	# we can force by unsetting KV_FULL
	[ -n "${KV_FULL}" ] && return 0

	# if we dont know KV_FULL, then we need too.
	# make sure KV_DIR isnt set since we need to work it out via KERNEL_DIR
	unset KV_DIR

	# KV_DIR will contain the full path to the sources directory we should use
	[ -z "${get_version_warning_done}" ] && \
	qeinfo "Determining the location of the kernel source code"
	[ -h "${KERNEL_DIR}" ] && KV_DIR="$(readlink -f ${KERNEL_DIR})"
	[ -d "${KERNEL_DIR}" ] && KV_DIR="${KERNEL_DIR}"

	if [ -z "${KV_DIR}" ]
	then
		if [ -z "${get_version_warning_done}" ]; then
			get_version_warning_done=1
			qeerror "Unable to find kernel sources at ${KERNEL_DIR}"
			#qeinfo "This package requires Linux sources."
			if [ "${KERNEL_DIR}" == "/usr/src/linux" ] ; then
				qeinfo "Please make sure that ${KERNEL_DIR} points at your running kernel, "
				qeinfo "(or the kernel you wish to build against)."
				qeinfo "Alternatively, set the KERNEL_DIR environment variable to the kernel sources location"
			else
				qeinfo "Please ensure that the KERNEL_DIR environment variable points at full Linux sources of the kernel you wish to compile against."
			fi
		fi
		return 1
	fi

	if [ -z "${get_version_warning_done}" ]; then
		qeinfo "Found kernel source directory:"
		qeinfo "    ${KV_DIR}"
	fi

	if [ ! -s "${KV_DIR}/Makefile" ]
	then
		if [ -z "${get_version_warning_done}" ]; then
			get_version_warning_done=1
			qeerror "Could not find a Makefile in the kernel source directory."
			qeerror "Please ensure that ${KERNEL_DIR} points to a complete set of Linux sources"
		fi
		return 1
	fi

	# OK so now we know our sources directory, but they might be using
	# KBUILD_OUTPUT, and we need this for .config and localversions-*
	# so we better find it eh?
	# do we pass KBUILD_OUTPUT on the CLI?
	OUTPUT_DIR="${OUTPUT_DIR:-${KBUILD_OUTPUT}}"

	# And if we didn't pass it, we can take a nosey in the Makefile
	kbuild_output="$(getfilevar_noexec KBUILD_OUTPUT ${KV_DIR}/Makefile)"
	OUTPUT_DIR="${OUTPUT_DIR:-${kbuild_output}}"

	# And contrary to existing functions I feel we shouldn't trust the
	# directory name to find version information as this seems insane.
	# so we parse ${KV_DIR}/Makefile
	KV_MAJOR="$(getfilevar_noexec VERSION ${KV_DIR}/Makefile)"
	KV_MINOR="$(getfilevar_noexec PATCHLEVEL ${KV_DIR}/Makefile)"
	KV_PATCH="$(getfilevar_noexec SUBLEVEL ${KV_DIR}/Makefile)"
	KV_EXTRA="$(getfilevar_noexec EXTRAVERSION ${KV_DIR}/Makefile)"

	if [ -z "${KV_MAJOR}" -o -z "${KV_MINOR}" -o -z "${KV_PATCH}" ]
	then
		if [ -z "${get_version_warning_done}" ]; then
			get_version_warning_done=1
			qeerror "Could not detect kernel version."
			qeerror "Please ensure that ${KERNEL_DIR} points to a complete set of Linux sources."
		fi
		return 1
	fi

	# and in newer versions we can also pull LOCALVERSION if it is set.
	# but before we do this, we need to find if we use a different object directory.
	# This *WILL* break if the user is using localversions, but we assume it was
	# caught before this if they are.
	[ "${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}${KV_EXTRA}" == "$(uname -r)" ] && \
		OUTPUT_DIR="${OUTPUT_DIR:-/lib/modules/${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}${KV_EXTRA}/build}"

	[ -h "${OUTPUT_DIR}" ] && KV_OUT_DIR="$(readlink -f ${OUTPUT_DIR})"
	[ -d "${OUTPUT_DIR}" ] && KV_OUT_DIR="${OUTPUT_DIR}"
	if [ -n "${KV_OUT_DIR}" ];
	then
		qeinfo "Found kernel object directory:"
		qeinfo "    ${KV_OUT_DIR}"

		KV_LOCAL="$(get_localversion ${KV_OUT_DIR})"
	fi
	# and if we STILL have not got it, then we better just set it to KV_DIR
	KV_OUT_DIR="${KV_OUT_DIR:-${KV_DIR}}"

	KV_LOCAL="${KV_LOCAL}$(get_localversion ${KV_DIR})"
	if linux_config_exists; then
		KV_LOCAL="${KV_LOCAL}$(linux_chkconfig_string LOCALVERSION)"
		KV_LOCAL="${KV_LOCAL//\"/}"

		# For things like git that can append extra stuff:
		[ -e ${KV_DIR}/scripts/setlocalversion ] &&
			linux_chkconfig_builtin LOCALVERSION_AUTO &&
			KV_LOCAL="${KV_LOCAL}$(sh ${KV_DIR}/scripts/setlocalversion ${KV_DIR})"
	fi

	# And we should set KV_FULL to the full expanded version
	KV_FULL="${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}${KV_EXTRA}${KV_LOCAL}"

	qeinfo "Found sources for kernel version:"
	qeinfo "    ${KV_FULL}"

	return 0
}

# @FUNCTION: get_running_version
# @DESCRIPTION:
# It gets the version of the current running kernel and the result is the same as get_version() if the
# function can find the sources.
get_running_version() {
	KV_FULL=$(uname -r)

	if [[ -f ${ROOT}/lib/modules/${KV_FULL}/source/Makefile ]]; then
		KERNEL_DIR=$(readlink -f ${ROOT}/lib/modules/${KV_FULL}/source)
		unset KV_FULL
		get_version
		return $?
	elif [[ -f ${ROOT}/lib/modules/${KV_FULL}/build/Makefile ]]; then
		KERNEL_DIR=$(readlink -f ${ROOT}/lib/modules/${KV_FULL}/build)
		unset KV_FULL
		get_version
		return $?
	else
		KV_MAJOR=$(get_version_component_range 1 ${KV_FULL})
		KV_MINOR=$(get_version_component_range 2 ${KV_FULL})
		KV_PATCH=$(get_version_component_range 3- ${KV_FULL})
		KV_PATCH=${KV_PATCH//-*}
		[[ -n ${KV_FULL#*-} ]] && [[ -n ${KV_FULL//${KV_FULL#*-}} ]] \
			&& KV_EXTRA="-${KV_FULL#*-}"
	fi
	return 0
}

# This next function is named with the eclass prefix to avoid conflicts with
# some old versionator-like eclass functions.

# @FUNCTION: linux-info_get_any_version
# @DESCRIPTION:
# This attempts to find the version of the sources, and otherwise falls back to
# the version of the running kernel.
linux-info_get_any_version() {
	get_version 
	if [[ $? -ne 0 ]]; then
		ewarn "Unable to calculate Linux Kernel version for build, attempting to use running version"
		get_running_version 
	fi
}


# ebuild check functions
# ---------------------------------------

# @FUNCTION: check_kernel_built
# @DESCRIPTION:
# This function verifies that the current kernel sources have been already prepared otherwise it dies.
check_kernel_built() {
	# if we haven't determined the version yet, we need to
	require_configured_kernel
	get_version

	if [ ! -f "${KV_OUT_DIR}/include/linux/version.h" ]
	then
		eerror "These sources have not yet been prepared."
		eerror "We cannot build against an unprepared tree."
		eerror "To resolve this, please type the following:"
		eerror
		eerror "# cd ${KV_DIR}"
		eerror "# make oldconfig"
		eerror "# make modules_prepare"
		eerror
		eerror "Then please try merging this module again."
		die "Kernel sources need compiling first"
	fi
}

# @FUNCTION: check_modules_supported
# @DESCRIPTION:
# This function verifies that the current kernel support modules (it checks CONFIG_MODULES=y) otherwise it dies.
check_modules_supported() {
	# if we haven't determined the version yet, we need too.
	require_configured_kernel
	get_version

	if ! linux_chkconfig_builtin "MODULES"
	then
		eerror "These sources do not support loading external modules."
		eerror "to be able to use this module please enable \"Loadable modules support\""
		eerror "in your kernel, recompile and then try merging this module again."
		die "No support for external modules in ${KV_FULL} config"
	fi
}

# @FUNCTION: check_extra_config
# @DESCRIPTION:
# It checks the kernel config options specified by CONFIG_CHECK. It dies only when a required config option (i.e.
# the prefix ~ is not used) doesn't satisfy the directive.
check_extra_config() {
	local	config negate die error reworkmodulenames
	local	soft_errors_count=0 hard_errors_count=0 config_required=0

	# if we haven't determined the version yet, we need to
	linux-info_get_any_version

	# Determine if we really need a .config. The only time when we don't need
	# one is when all of the CONFIG_CHECK options are prefixed with "~".
	for config in ${CONFIG_CHECK}
	do
		if [[ "${config:0:1}" != "~" ]]; then
			config_required=1
			break
		fi
	done

	if [[ ${config_required} == 0 ]]; then
		# In the case where we don't require a .config, we can now bail out
		# if the user has no .config as there is nothing to do. Otherwise
		# code later will cause a failure due to missing .config.
		if ! linux_config_exists; then
			ewarn "Unable to check for the following kernel config options due"
			ewarn "to absence of any configured kernel sources or compiled"
			ewarn "config:"
			for config in ${CONFIG_CHECK}; do
				ewarn " - ${config#\~}"
			done
			ewarn "You're on your own to make sure they are set if needed."
			return 0
		fi
	else
		[ -n "${I_KNOW_WHAT_I_AM_DOING}" ] && require_configured_kernel
	fi

	einfo "Checking for suitable kernel configuration options..."

	for config in ${CONFIG_CHECK}
	do
		# if we specify any fatal, ensure we honor them
		die=1
		error=0
		negate=0
		reworkmodulenames=0

		if [[ ${config:0:1} == "~" ]]; then
			die=0
			config=${config:1}
		elif [[ ${config:0:1} == "@" ]]; then
			die=0
			reworkmodulenames=1
			config=${config:1}
		fi
		if [[ ${config:0:1} == "!" ]]; then
			negate=1
			config=${config:1}
		fi

		if [[ ${negate} == 1 ]]; then
			linux_chkconfig_present ${config} && error=2
		elif [[ ${reworkmodulenames} == 1 ]]; then
			local temp_config="${config//*:}" i n
			config="${config//:*}"
			if linux_chkconfig_present ${config}; then
				for i in ${MODULE_NAMES}; do
					n="${i//${temp_config}}"
					[[ -z ${n//\(*} ]] && \
						MODULE_IGNORE="${MODULE_IGNORE} ${temp_config}"
				done
				error=2
			fi
		else
			linux_chkconfig_present ${config} || error=1
		fi

		if [[ ${error} > 0 ]]; then
			local report_func="eerror" local_error
			local_error="ERROR_${config}"
			local_error="${!local_error}"

			if [[ -z "${local_error}" ]]; then
				# using old, deprecated format.
				local_error="${config}_ERROR"
				local_error="${!local_error}"
			fi
			if [[ ${die} == 0 && -z "${local_error}" ]]; then
				#soft errors can be warnings
				local_error="WARNING_${config}"
				local_error="${!local_error}"
				if [[ -n "${local_error}" ]] ; then
					report_func="ewarn"
				fi
			fi

			if [[ -z "${local_error}" ]]; then
				[[ ${error} == 1 ]] \
					&& local_error="is not set when it should be." \
					|| local_error="should not be set. But it is."
				local_error="CONFIG_${config}:\t ${local_error}"
			fi
			if [[ ${die} == 0 ]]; then
				${report_func} "  ${local_error}"
				soft_errors_count=$[soft_errors_count + 1]
			else
				${report_func} "  ${local_error}"
				hard_errors_count=$[hard_errors_count + 1]
			fi
		fi
	done

	if [[ ${hard_errors_count} > 0 ]]; then
		eerror "Please check to make sure these options are set correctly."
		eerror "Failure to do so may cause unexpected problems."
		eerror "Once you have satisfied these options, please try merging"
		eerror "this package again."
		die "Incorrect kernel configuration options"
	elif [[ ${soft_errors_count} > 0 ]]; then
		ewarn "Please check to make sure these options are set correctly."
		ewarn "Failure to do so may cause unexpected problems."
	else
		eend 0
	fi
}

check_zlibinflate() {
	# if we haven't determined the version yet, we need to
	require_configured_kernel
	get_version

	# although I restructured this code - I really really really dont support it!

	# bug #27882 - zlib routines are only linked into the kernel
	# if something compiled into the kernel calls them
	#
	# plus, for the cloop module, it appears that there's no way
	# to get cloop.o to include a static zlib if CONFIG_MODVERSIONS
	# is on

	local INFLATE
	local DEFLATE

	einfo "Determining the usability of ZLIB_INFLATE support in your kernel"

	ebegin "checking ZLIB_INFLATE"
	linux_chkconfig_builtin CONFIG_ZLIB_INFLATE
	eend $?
	[ "$?" != 0 ] && die

	ebegin "checking ZLIB_DEFLATE"
	linux_chkconfig_builtin CONFIG_ZLIB_DEFLATE
	eend $?
	[ "$?" != 0 ] && die

	local LINENO_START
	local LINENO_END
	local SYMBOLS
	local x

	LINENO_END="$(grep -n 'CONFIG_ZLIB_INFLATE y' ${KV_DIR}/lib/Config.in | cut -d : -f 1)"
	LINENO_START="$(head -n $LINENO_END ${KV_DIR}/lib/Config.in | grep -n 'if \[' | tail -n 1 | cut -d : -f 1)"
	(( LINENO_AMOUNT = $LINENO_END - $LINENO_START ))
	(( LINENO_END = $LINENO_END - 1 ))
	SYMBOLS="$(head -n $LINENO_END ${KV_DIR}/lib/Config.in | tail -n $LINENO_AMOUNT | sed -e 's/^.*\(CONFIG_[^\" ]*\).*/\1/g;')"

	# okay, now we have a list of symbols
	# we need to check each one in turn, to see whether it is set or not
	for x in $SYMBOLS ; do
		if [ "${!x}" = "y" ]; then
			# we have a winner!
			einfo "${x} ensures zlib is linked into your kernel - excellent"
			return 0
		fi
	done

	eerror
	eerror "This kernel module requires ZLIB library support."
	eerror "You have enabled zlib support in your kernel, but haven't enabled"
	eerror "enabled any option that will ensure that zlib is linked into your"
	eerror "kernel."
	eerror
	eerror "Please ensure that you enable at least one of these options:"
	eerror

	for x in $SYMBOLS ; do
		eerror "  * $x"
	done

	eerror
	eerror "Please remember to recompile and install your kernel, and reboot"
	eerror "into your new kernel before attempting to load this kernel module."

	die "Kernel doesn't include zlib support"
}

################################
# Default pkg_setup
# Also used when inheriting linux-mod to force a get_version call
# @FUNCTION: linux-info_pkg_setup
# @DESCRIPTION:
# Force a get_version() call when inherited from linux-mod.eclass and then check if the kernel is configured
# to support the options specified in CONFIG_CHECK (if not null)
linux-info_pkg_setup() {
	linux-info_get_any_version

	if kernel_is 2 4; then
		if [ "$( gcc-major-version )" -eq "4" ] ; then
			echo
			ewarn "Be warned !! >=sys-devel/gcc-4.0.0 isn't supported with"
			ewarn "linux-2.4 (or modules building against a linux-2.4 kernel)!"
			echo
			ewarn "Either switch to another gcc-version (via gcc-config) or use a"
			ewarn "newer kernel that supports gcc-4."
			echo
			ewarn "Also be aware that bugreports about gcc-4 not working"
			ewarn "with linux-2.4 based ebuilds will be closed as INVALID!"
			echo
			epause 10
		fi
	fi

	[ -n "${CONFIG_CHECK}" ] && check_extra_config;
}