Version bump to 3.2.2, bug 359287. Remove some older versions.

(Portage version: 2.2.0_alpha27/cvs/Linux x86_64)

7 files changed, 44 insertions, 2322 deletions

diff --git a/app-backup/amanda/ChangeLog b/app-backup/amanda/ChangeLog
index 1c8dbaeacd04..b55e67e00673 100644
--- a/app-backup/amanda/ChangeLog
+++ b/app-backup/amanda/ChangeLog
@@ -1,6 +1,13 @@
 # ChangeLog for app-backup/amanda
-# Copyright 1999-2010 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/ChangeLog,v 1.78 2010/12/29 16:29:58 idl0r Exp $
+# Copyright 1999-2011 Gentoo Foundation; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/ChangeLog,v 1.79 2011/03/17 20:52:36 idl0r Exp $
+
+*amanda-3.2.2 (17 Mar 2011)
+
+  17 Mar 2011; Christian Ruppert <idl0r@gentoo.org> -amanda-2.6.0_p2-r1.ebuild,
+  -amanda-2.6.0_p2-r2.ebuild, -amanda-2.6.0_p2-r3.ebuild, -amanda-3.1.2.ebuild,
+  -amanda-3.2.0_beta1.ebuild, -amanda-3.2.0.ebuild, +amanda-3.2.2.ebuild:
+  Version bump to 3.2.2, bug 359287. Remove some older versions.
 
   29 Dec 2010; Christian Ruppert <idl0r@gentoo.org> amanda-3.2.1.ebuild:
   Move elog block regarding the AMANDA_SERVER environment variable into
diff --git a/app-backup/amanda/amanda-2.6.0_p2-r1.ebuild b/app-backup/amanda/amanda-2.6.0_p2-r1.ebuild
deleted file mode 100644
index a438d9fdb69a..000000000000
--- a/app-backup/amanda/amanda-2.6.0_p2-r1.ebuild
+++ /dev/null
@@ -1,465 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-2.6.0_p2-r1.ebuild,v 1.1 2008/09/18 04:13:38 robbat2 Exp $
-
-inherit autotools eutils
-
-DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
-HOMEPAGE="http://www.amanda.org/"
-SRC_URI="mirror://sourceforge/amanda/${P/_/}.tar.gz"
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
-RDEPEND="sys-libs/readline
-		virtual/inetd
-		sys-apps/gawk
-		app-arch/tar
-		dev-lang/perl
-		app-arch/dump
-		net-misc/openssh
-		dev-libs/glib
-		s3? ( net-misc/curl )
-		samba? ( net-fs/samba )
-		kerberos? ( app-crypt/mit-krb5 )
-		!sparc? ( xfs? ( sys-fs/xfsdump ) )
-		!minimal? ( virtual/mailx
-			app-arch/mt-st
-			sys-block/mtx
-			sci-visualization/gnuplot
-			app-crypt/aespipe
-			app-crypt/gnupg )"
-
-DEPEND="${RDEPEND}
-	sys-devel/autoconf
-	sys-devel/automake"
-
-IUSE="berkdb debug gdbm minimal s3 samba xfs kerberos"
-
-S="${WORKDIR}/${P/_/}"
-MYFILESDIR="${WORKDIR}/files"
-MYTMPDIR="${WORKDIR}/tmp"
-MYINSTTMPDIR="/usr/share/amanda"
-ENVDIR="/etc/env.d"
-ENVDFILE="97amanda"
-TMPENVFILE="${MYTMPDIR}/${ENVDFILE}"
-TMPINSTENVFILE="${MYINSTTMPDIR}/tmpenv-${ENVDFILE}"
-
-# This is a complete list of Amanda settings that the ebuild takes from the
-# build environment. This allows users to alter the behavior of the package as
-# upstream intended, but keeping with Gentoo style. We store a copy of them in
-# /etc/env.d/97amanda during the install, so that they are preserved for future
-# installed. This variable name must not start with AMANDA_, as we do not want
-# it captured into the env file.
-ENV_SETTINGS_AMANDA="
-AMANDA_GROUP_GID AMANDA_GROUP_NAME
-AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
-AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX
-AMANDA_TAR_LISTDIR AMANDA_TAR
-AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
-AMANDA_CONFIG_NAME AMANDA_TMPDIR AMANDA_MAX_TAPE_BLOCK_KB"
-
-amanda_variable_setup() {
-
-	# Setting vars
-	local currentamanda
-
-	# Grab the current settings
-	currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
-	use debug && einfo "Current settings: ${currentamanda}"
-	#for i in ${currentamanda}; do
-	#	eval `eval echo ${i}`
-	#	echo "Setting: ${i}"
-	#done;
-
-	# First we set the defaults
-	[ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87
-	[ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda
-	[ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda
-	[ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87
-	[ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=-1
-	[ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda
-	[ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
-
-	# This installs Amanda, with the server. However, it could be a client,
-	# just specify an alternate server name in AMANDA_SERVER.
-	[ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}"
-	[ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
-	[ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
-	[ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
-	[ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1
-	[ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda
-	[ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
-	# These are left empty by default
-	[ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP=
-	[ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP=
-	[ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH=
-	[ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS=
-
-	# What tar to use
-	[ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar
-
-	# Text mode is the only one left.
-	AMANDA_DBMODE='text'
-
-	# Raise maximum configurable blocksize
-	[ -z "${AMANDA_MAX_TAPE_BLOCK_KB}" ] && AMANDA_MAX_TAPE_BLOCK_KB=512
-
-	# Now pull in the old stuff
-	if [ -f "${ENVDIR}/${ENVDFILE}" ]; then
-		# We don't just source it as we don't want everything in there.
-		eval $(egrep "^AMANDA_" ${ENVDIR}/${ENVDFILE} | grep -v '^AMANDA_ENV_SETTINGS')
-	fi
-
-	# Re-apply the new settings if any
-	[ -n "${currentamanda}" ] && eval `echo "${currentamanda}"`
-
-}
-
-pkg_setup() {
-	# Now add users if needed
-	[ -n "${AMANDA_DBMODE}" -a "${AMANDA_DBMODE}" != "text" ] && \
-		ewarn "Using db or gdbm modes for the database is no longer supported."
-	amanda_variable_setup
-	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
-	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
-}
-
-src_unpack() {
-	unpack ${A}
-
-	# Gentoo bug #192296, chg-multi fails
-	#EPATCH_OPTS="-d ${S}" epatch ${FILESDIR}/${PN}-2.5.2_p1-chg-multi.patch || die "Failed to apply patch to correct typo in chg-multi!"
-
-	# Gentoo bug #212970, --as-needed linking
-	#EPATCH_OPTS="-d ${S}" epatch ${FILESDIR}/${PN}-2.5.2_p1-fix-asneeded.patch || die "Failed to apply patch to correct bug #212970!"
-
-	cd "${S}"
-	epatch "${FILESDIR}"/s3-list-keys.diff
-	cd "${S}"/device-src
-	epatch "${FILESDIR}"/s3.c.part2.diff
-
-	cd "${S}"
-	#sed -i 's,amanda_working_ipv6,amanda_cv_working_ipv6,g' \
-	#	"${S}"/configure.in || die "failed to sed"
-	# rm -f "${S}"/acinclude.m4
-	eautomake
-
-	# now the real fun
-	amanda_variable_setup
-	# places for us to work in
-	mkdir -p "${MYFILESDIR}" "${MYTMPDIR}"
-	# Now we store the settings we just created
-	set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}"
-}
-
-src_compile() {
-	# fix bug #36316
-	addpredict /var/cache/samba/gencache.tdb
-
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-	local myconf
-	cd "${S}"
-
-	einfo "Using '${AMANDA_DBMODE}' style database"
-	myconf="${myconf} --with-db=${AMANDA_DBMODE}"
-	einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
-	myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
-	einfo "Using ${AMANDA_SERVER_INDEX} for index server."
-	myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
-	einfo "Using ${AMANDA_USER_NAME} for amanda user."
-	myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
-	einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
-	myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
-	einfo "Using ${AMANDA_TAR} as Tar implementation."
-	myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
-	einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
-	myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
-	einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
-	myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
-	einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
-	myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
-
-	if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
-		eerror "If you want _both_ UDP and TCP ports, please use only the"
-		eerror "AMANDA_PORTS environment variable for identical ports, or set"
-		eerror "AMANDA_PORTS_BOTH."
-		die "Bad port setup!"
-	fi
-	if [ -n "${AMANDA_PORTS_UDP}" ]; then
-		einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
-		myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
-	fi
-	if [ -n "${AMANDA_PORTS_TCP}" ]; then
-		einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
-		myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
-	fi
-	if [ -n "${AMANDA_PORTS}" ]; then
-		einfo "Using ports ${AMANDA_PORTS/,/-}"
-		myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
-	fi
-
-	# Extras
-	# Speed option
-	myconf="${myconf} --with-buffered-dump"
-	# "debugging" in the configuration is NOT debug in the conventional sense.
-	# It is actually just useful output in the application, and should remain
-	# enabled. There are some cases of breakage with MTX tape changers as of
-	# 2.5.1p2 that it exposes when turned off as well.
-	myconf="${myconf} --with-debugging"
-	# Where to put our files
-	myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
-
-	# Samba support
-	myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`"
-
-	# Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
-	# default
-	myconf="${myconf} --with-bsd-security"
-	myconf="${myconf} --with-ssh-security"
-	myconf="${myconf} --with-bsdudp-security"
-	myconf="${myconf} --with-bsdtcp-security"
-
-	# kerberos-security mechanism version 4
-	# always disable, per bug #173354
-	myconf="${myconf} --without-krb4-security"
-
-	# kerberos-security mechanism version 5
-	myconf="${myconf} `use_with kerberos krb5-security`"
-
-	# Amazon S3 support
-	myconf="${myconf} `use_enable s3 s3-device`"
-	myconf="${myconf} `use_enable s3 devpay`"
-
-	# Client only, as requested in bug #127725
-	use minimal && myconf="${myconf} --without-server"
-
-	# Raise maximum configurable blocksize
-	myconf="${myconf} --with-maxtapeblocksize=${AMANDA_MAX_TAPE_BLOCK_KB}"
-
-	econf ${myconf} || die "econf failed!"
-	emake -j1 || die "emake failed!"
-
-	# Compile the tapetype program too
-	# This is deprecated, use amtapetype instead!
-	# cd tape-src
-	# emake tapetype || die "emake tapetype failed!"
-
-	# Only needed if you we do versioning
-	#dosed "s,/usr/local/bin/perl,/usr/bin/perl," ${S}/contrib/set_prod_link.pl
-	#perl ${S}/contrib/set_prod_link.pl
-
-}
-
-src_install() {
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source ${TMPENVFILE}
-
-	einfo "Doing stock install"
-	emake -j1 DESTDIR="${D}" install || die
-
-	# Prepare our custom files
-	einfo "Building custom configuration files"
-	cp "${FILESDIR}"/amanda-* "${MYFILESDIR}"
-	local i # our iterator
-	local sedexpr # var for sed expr
-	sedexpr=''
-	for i in ${ENV_SETTINGS_AMANDA} ; do
-		local val
-		eval "val=\"\${${i}}\""
-		sedexpr="${sedexpr}s|__${i}__|${val}|g;"
-	done
-	#einfo "Compiled SED expression: '${sedexpr}'"
-
-	# now apply the sed expr
-	for i in "${FILESDIR}"/amanda-* ; do
-		local filename
-		filename="`basename ${i}`"
-		#einfo "Applying compiled SED expression to ${filename}"
-		sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}"/${filename}
-	done
-
-	# Build the envdir file
-	# Don't forget this..
-	einfo "Building environment file"
-	local t
-	t="${MYFILESDIR}"/${ENVDFILE}
-	echo "# These settings are what was present in the environment when this" >>"${t}"
-	echo "# Amanda was compiled.  Changing anything below this comment will" >>"${t}"
-	echo "# have no effect on your application, but it merely exists to" >>"${t}"
-	echo "# preserve them for your next emerge of Amanda" >>"${t}"
-	cat "${TMPENVFILE}" | sed "s,=\$,='',g" >>"${t}"
-
-	into /usr
-
-	# Deprecated, use amtapetype instead
-	#einfo "Installing tapetype utility"
-	#newsbin tape-src/tapetype tapetype
-
-	# docs
-	einfo "Installing documentation"
-	dodoc AUTHORS C* INSTALL NEWS README
-	# Clean up some bits
-	dodoc /usr/share/amanda/*
-	rm -rf "${D}"/usr/share/amanda
-	mkdir -p "${D}"/${MYINSTTMPDIR} || die
-	cp "${TMPENVFILE}" "${D}"/${TMPINSTENVFILE} || die
-	# our inetd sample
-	einfo "Installing standard inetd sample"
-	newdoc "${MYFILESDIR}"/amanda-inetd.amanda.sample-2.5.1_p3-r1 amanda-inetd.amanda.sample
-	# Stock extra docs
-	docinto docs
-	dodoc "${S}"/docs/*
-	# Labels
-	einfo "Installing labels"
-	docinto labels
-	dodoc "${S}"/example/3hole.ps
-	dodoc "${S}"/example/8.5x11.ps
-	dodoc "${S}"/example/DIN-A4.ps
-	dodoc "${S}"/example/DLT.ps
-	dodoc "${S}"/example/EXB-8500.ps
-	dodoc "${S}"/example/HP-DAT.ps
-	# Amanda example configs
-	einfo "Installing example configurations"
-	docinto example
-	dodoc "${S}"/example/*
-	docinto example1
-	newdoc "${FILESDIR}"/example_amanda.conf amanda.conf
-	newdoc "${FILESDIR}"/example_disklist-2.5.1_p3-r1 disklist
-	newdoc "${FILESDIR}"/example_global.conf global.conf
-	docinto example2
-	newdoc "${S}"/example/amanda.conf amanda.conf
-	newdoc "${S}"/example/disklist disklist
-	# Compress it all
-	prepalldocs
-
-	# Just make sure it exists for XFS to work...
-	use !sparc && use xfs && keepdir /var/xfsdump/inventory
-
-	insinto /etc/amanda
-	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
-
-	cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 \
-		>>"${D}"/etc/amanda/amandahosts
-	use minimal \
-	|| cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 \
-		>>"${D}"/etc/amanda/amandahosts
-
-	dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}"/.amandahosts
-	insinto "${AMANDA_USER_HOMEDIR}"
-	einfo "Installing .profile for ${AMANDA_USER_NAME} user"
-	newins "${MYFILESDIR}"/amanda-profile .profile
-
-	einfo "Installing Sample Daily Cron Job for Amanda"
-	CRONDIR=/etc/cron.daily/
-	exeinto ${CRONDIR}
-	newexe "${MYFILESDIR}"/amanda-cron amanda
-	# Not executable by default
-	fperms 644 ${CRONDIR}/amanda
-
-	insinto /etc/amanda/${AMANDA_CONFIG_NAME}
-	keepdir /etc/amanda
-	keepdir /etc/amanda/${AMANDA_CONFIG_NAME}
-
-	local i
-	for i in ${AMANDA_USER_HOMEDIR} ${AMANDA_TAR_LISTDIR} \
-		${AMANDA_TMPDIR} ${AMANDA_TMPDIR}/dumps \
-		${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME} \
-		/etc/amanda /etc/amanda/${AMANDA_CONFIG_NAME}; do
-		einfo "Securing directory (${i})"
-		dodir ${i}
-		keepdir ${i}
-		fowners ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
-		fperms 700 ${i}
-	done
-
-	einfo "Setting setuid permissions"
-	amanda_permissions_fix "${D}"
-
-	# DevFS
-	einfo "Installing DevFS config file"
-	insinto /etc/devfs.d
-	newins "${MYFILESDIR}"/amanda-devfs amanda
-
-	# Env.d
-	einfo "Installing environment config file"
-	doenvd "${MYFILESDIR}"/${ENVDFILE}
-
-	# Installing Amanda Xinetd Services Definition
-	einfo "Installing xinetd service file"
-	insinto /etc/xinetd.d
-	newins "${MYFILESDIR}"/amanda-xinetd-2.5.1_p3-r1 amanda
-
-}
-
-pkg_postinst() {
-	local aux="${ROOT}"/${TMPINSTENVFILE}
-	[ ! -f "${aux}" ] && die "Variable setting file (${aux}) should exist!"
-	source "${aux}"
-	rm "${aux}"
-	rmdir "${ROOT}"/${MYINSTTMPDIR} 2>/dev/null # ignore error
-
-	local i
-	for i in amandates dumpdates; do
-		einfo "Creating inital Amanda file (${i})"
-		touch "${ROOT}"/etc/${i}
-		chown ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} "${ROOT}"/etc/${i}
-		chmod 600 "${ROOT}"/etc/${i}
-	done
-
-	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
-	# another host than HOSTNAME.
-	if use minimal; then
-		if [[ "${AMANDA_SERVER}" = "${HOSTNAME}" ]]; then
-			echo
-			ewarn "You are installing a client-only version of Amanda."
-			ewarn "You should set the variable $AMANDA_SERVER to point at your"
-			ewarn "Amanda-tape-server, otherwise you will have to specify its name"
-			ewarn "when using amrecover on the client."
-			ewarn "For example: Use something like"
-			ewarn "AMANDA_SERVER=\"myserver\" emerge amanda"
-			echo
-		fi
-	fi
-
-	einfo "Checking setuid permissions"
-	amanda_permissions_fix "${ROOT}"
-
-	elog "You should configure Amanda in /etc/amanda now."
-	elog
-	elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
-	elog "and restart xinetd afterwards!"
-	elog
-	elog "Otherwise, please look at /usr/share/doc/${P}/inetd.amanda.sample"
-	elog "as an example of how to configure your inetd."
-	elog
-	elog "NOTICE: If you need raw access to partitions you need to add the"
-	elog "amanda user to the 'disk' group and uncomment following lines in"
-	elog "your /etc/devfs.d/amanda:"
-	elog "SCSI:"
-	elog "REGISTER   ^scsi/host.*/bus.*/target.*/lun.*/part[0-9]  PERMISSIONS root.disk 660"
-	elog "IDE:"
-	elog "REGISTER   ^ide/host.*/bus.*/target.*/lun.*/part[0-9]   PERMISSIONS root.disk 660"
-	elog
-	elog "NOTICE: If you have a tape changer, also uncomment the following"
-	elog "REGISTER   ^scsi/host.*/bus.*/target.*/lun.*/generic    PERMISSIONS root.disk 660"
-	elog
-	elog "If you use localhost in your disklist your restores may break."
-	elog "You should replace it with the actual hostname!"
-	elog "Please also see the syntax changes to amandahosts."
-}
-
-# We have had reports of amanda file permissions getting screwed up.
-# Losing setuid, becoming too lax etc.
-# ONLY root and users in the amanda group should be able to run these binaries!
-amanda_permissions_fix() {
-	local root="$1"
-	[ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
-	local le="/usr/libexec/amanda"
-	for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
-		"${le}"/rundump "${le}"/runtar "${le}"/dumper \
-		"${le}"/planner ; do
-		chown root:${AMANDA_GROUP_NAME} "${root}"/${i}
-		chmod u=srwx,g=rx,o= "${root}"/${i}
-	done
-}
diff --git a/app-backup/amanda/amanda-2.6.0_p2-r2.ebuild b/app-backup/amanda/amanda-2.6.0_p2-r2.ebuild
deleted file mode 100644
index 730a8a372cac..000000000000
--- a/app-backup/amanda/amanda-2.6.0_p2-r2.ebuild
+++ /dev/null
@@ -1,484 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-2.6.0_p2-r2.ebuild,v 1.2 2008/09/24 09:20:49 robbat2 Exp $
-
-inherit autotools eutils
-
-DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
-HOMEPAGE="http://www.amanda.org/"
-SRC_URI="mirror://sourceforge/amanda/${P/_/}.tar.gz"
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
-RDEPEND="sys-libs/readline
-		virtual/inetd
-		sys-apps/gawk
-		app-arch/tar
-		dev-lang/perl
-		app-arch/dump
-		net-misc/openssh
-		dev-libs/glib
-		s3? ( net-misc/curl )
-		samba? ( net-fs/samba )
-		kerberos? ( app-crypt/mit-krb5 )
-		!sparc? ( xfs? ( sys-fs/xfsdump ) )
-		!minimal? ( virtual/mailx
-			app-arch/mt-st
-			sys-block/mtx
-			sci-visualization/gnuplot
-			app-crypt/aespipe
-			app-crypt/gnupg )"
-
-DEPEND="${RDEPEND}
-	sys-devel/autoconf
-	sys-devel/automake"
-
-IUSE="berkdb debug gdbm minimal s3 samba xfs kerberos"
-
-S="${WORKDIR}/${P/_/}"
-MYFILESDIR="${WORKDIR}/files"
-MYTMPDIR="${WORKDIR}/tmp"
-MYINSTTMPDIR="/usr/share/amanda"
-ENVDIR="/etc/env.d"
-ENVDFILE="97amanda"
-TMPENVFILE="${MYTMPDIR}/${ENVDFILE}"
-TMPINSTENVFILE="${MYINSTTMPDIR}/tmpenv-${ENVDFILE}"
-
-# This is a complete list of Amanda settings that the ebuild takes from the
-# build environment. This allows users to alter the behavior of the package as
-# upstream intended, but keeping with Gentoo style. We store a copy of them in
-# /etc/env.d/97amanda during the install, so that they are preserved for future
-# installed. This variable name must not start with AMANDA_, as we do not want
-# it captured into the env file.
-ENV_SETTINGS_AMANDA="
-AMANDA_GROUP_GID AMANDA_GROUP_NAME
-AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
-AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX
-AMANDA_TAR_LISTDIR AMANDA_TAR
-AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
-AMANDA_CONFIG_NAME AMANDA_TMPDIR AMANDA_MAX_TAPE_BLOCK_KB"
-
-amanda_variable_setup() {
-
-	# Setting vars
-	local currentamanda
-
-	# Grab the current settings
-	currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
-	use debug && einfo "Current settings: ${currentamanda}"
-	#for i in ${currentamanda}; do
-	#	eval `eval echo ${i}`
-	#	echo "Setting: ${i}"
-	#done;
-
-	# First we set the defaults
-	[ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87
-	[ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda
-	[ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda
-	[ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87
-	[ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=-1
-	[ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda
-	[ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
-
-	# This installs Amanda, with the server. However, it could be a client,
-	# just specify an alternate server name in AMANDA_SERVER.
-	[ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}"
-	[ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
-	[ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
-	[ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
-	[ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1
-	[ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda
-	[ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
-	# These are left empty by default
-	[ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP=
-	[ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP=
-	[ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH=
-	[ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS=
-
-	# What tar to use
-	[ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar
-
-	# Text mode is the only one left.
-	AMANDA_DBMODE='text'
-
-	# Raise maximum configurable blocksize
-	[ -z "${AMANDA_MAX_TAPE_BLOCK_KB}" ] && AMANDA_MAX_TAPE_BLOCK_KB=512
-
-	# Now pull in the old stuff
-	if [ -f "${ENVDIR}/${ENVDFILE}" ]; then
-		# We don't just source it as we don't want everything in there.
-		eval $(egrep "^AMANDA_" ${ENVDIR}/${ENVDFILE} | grep -v '^AMANDA_ENV_SETTINGS')
-	fi
-
-	# Re-apply the new settings if any
-	[ -n "${currentamanda}" ] && eval `echo "${currentamanda}"`
-
-}
-
-pkg_setup() {
-	# Now add users if needed
-	[ -n "${AMANDA_DBMODE}" -a "${AMANDA_DBMODE}" != "text" ] && \
-		ewarn "Using db or gdbm modes for the database is no longer supported."
-	amanda_variable_setup
-	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
-	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
-}
-
-src_unpack() {
-	unpack ${A}
-
-	# Gentoo bug #192296, chg-multi fails
-	#EPATCH_OPTS="-d ${S}" epatch ${FILESDIR}/${PN}-2.5.2_p1-chg-multi.patch || die "Failed to apply patch to correct typo in chg-multi!"
-
-	# Gentoo bug #212970, --as-needed linking
-	#EPATCH_OPTS="-d ${S}" epatch ${FILESDIR}/${PN}-2.5.2_p1-fix-asneeded.patch || die "Failed to apply patch to correct bug #212970!"
-
-	cd "${S}"
-	epatch "${FILESDIR}"/s3-list-keys.diff
-	cd "${S}"/device-src
-	epatch "${FILESDIR}"/s3.c.part2.diff
-
-	cd "${S}"
-	#sed -i 's,amanda_working_ipv6,amanda_cv_working_ipv6,g' \
-	#	"${S}"/configure.in || die "failed to sed"
-	# rm -f "${S}"/acinclude.m4
-	eautomake
-
-	# now the real fun
-	amanda_variable_setup
-	# places for us to work in
-	mkdir -p "${MYFILESDIR}" "${MYTMPDIR}"
-	# Now we store the settings we just created
-	set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}"
-}
-
-src_compile() {
-	# fix bug #36316
-	addpredict /var/cache/samba/gencache.tdb
-
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-	local myconf
-	cd "${S}"
-
-	einfo "Using '${AMANDA_DBMODE}' style database"
-	myconf="${myconf} --with-db=${AMANDA_DBMODE}"
-	einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
-	myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
-	einfo "Using ${AMANDA_SERVER_INDEX} for index server."
-	myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
-	einfo "Using ${AMANDA_USER_NAME} for amanda user."
-	myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
-	einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
-	myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
-	einfo "Using ${AMANDA_TAR} as Tar implementation."
-	myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
-	einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
-	myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
-	einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
-	myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
-	einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
-	myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
-
-	if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
-		eerror "If you want _both_ UDP and TCP ports, please use only the"
-		eerror "AMANDA_PORTS environment variable for identical ports, or set"
-		eerror "AMANDA_PORTS_BOTH."
-		die "Bad port setup!"
-	fi
-	if [ -n "${AMANDA_PORTS_UDP}" ]; then
-		einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
-		myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
-	fi
-	if [ -n "${AMANDA_PORTS_TCP}" ]; then
-		einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
-		myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
-	fi
-	if [ -n "${AMANDA_PORTS}" ]; then
-		einfo "Using ports ${AMANDA_PORTS/,/-}"
-		myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
-	fi
-
-	# Extras
-	# Speed option
-	myconf="${myconf} --with-buffered-dump"
-	# "debugging" in the configuration is NOT debug in the conventional sense.
-	# It is actually just useful output in the application, and should remain
-	# enabled. There are some cases of breakage with MTX tape changers as of
-	# 2.5.1p2 that it exposes when turned off as well.
-	myconf="${myconf} --with-debugging"
-	# Where to put our files
-	myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
-
-	# Samba support
-	myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`"
-
-	# Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
-	# default
-	myconf="${myconf} --with-bsd-security"
-	myconf="${myconf} --with-ssh-security"
-	myconf="${myconf} --with-bsdudp-security"
-	myconf="${myconf} --with-bsdtcp-security"
-
-	# kerberos-security mechanism version 4
-	# always disable, per bug #173354
-	myconf="${myconf} --without-krb4-security"
-
-	# kerberos-security mechanism version 5
-	myconf="${myconf} `use_with kerberos krb5-security`"
-
-	# Amazon S3 support
-	myconf="${myconf} `use_enable s3 s3-device`"
-	myconf="${myconf} `use_enable s3 devpay`"
-
-	# Client only, as requested in bug #127725
-	use minimal && myconf="${myconf} --without-server"
-
-	# Raise maximum configurable blocksize
-	myconf="${myconf} --with-maxtapeblocksize=${AMANDA_MAX_TAPE_BLOCK_KB}"
-
-	econf ${myconf} || die "econf failed!"
-	emake -j1 || die "emake failed!"
-
-	# Compile the tapetype program too
-	# This is deprecated, use amtapetype instead!
-	# cd tape-src
-	# emake tapetype || die "emake tapetype failed!"
-
-	# Only needed if you we do versioning
-	#dosed "s,/usr/local/bin/perl,/usr/bin/perl," ${S}/contrib/set_prod_link.pl
-	#perl ${S}/contrib/set_prod_link.pl
-
-}
-
-src_install() {
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source ${TMPENVFILE}
-
-	einfo "Doing stock install"
-	emake -j1 DESTDIR="${D}" install || die
-
-	# Prepare our custom files
-	einfo "Building custom configuration files"
-	cp "${FILESDIR}"/amanda-* "${MYFILESDIR}"
-	local i # our iterator
-	local sedexpr # var for sed expr
-	sedexpr=''
-	for i in ${ENV_SETTINGS_AMANDA} ; do
-		local val
-		eval "val=\"\${${i}}\""
-		sedexpr="${sedexpr}s|__${i}__|${val}|g;"
-	done
-	#einfo "Compiled SED expression: '${sedexpr}'"
-
-	# now apply the sed expr
-	for i in "${FILESDIR}"/amanda-* ; do
-		local filename
-		filename="`basename ${i}`"
-		#einfo "Applying compiled SED expression to ${filename}"
-		sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}"/${filename}
-	done
-
-	# Build the envdir file
-	# Don't forget this..
-	einfo "Building environment file"
-	local t
-	t="${MYFILESDIR}"/${ENVDFILE}
-	echo "# These settings are what was present in the environment when this" >>"${t}"
-	echo "# Amanda was compiled.  Changing anything below this comment will" >>"${t}"
-	echo "# have no effect on your application, but it merely exists to" >>"${t}"
-	echo "# preserve them for your next emerge of Amanda" >>"${t}"
-	cat "${TMPENVFILE}" | sed "s,=\$,='',g" >>"${t}"
-
-	into /usr
-
-	# Deprecated, use amtapetype instead
-	#einfo "Installing tapetype utility"
-	#newsbin tape-src/tapetype tapetype
-
-	# docs
-	einfo "Installing documentation"
-	dodoc AUTHORS C* INSTALL NEWS README
-	# Clean up some bits
-	dodoc /usr/share/amanda/*
-	rm -rf "${D}"/usr/share/amanda
-	mkdir -p "${D}"/${MYINSTTMPDIR} || die
-	cp "${TMPENVFILE}" "${D}"/${TMPINSTENVFILE} || die
-	# our inetd sample
-	einfo "Installing standard inetd sample"
-	newdoc "${MYFILESDIR}"/amanda-inetd.amanda.sample-2.6.0_p2-r2 amanda-inetd.amanda.sample
-	# Stock extra docs
-	docinto docs
-	dodoc "${S}"/docs/*
-	# Labels
-	einfo "Installing labels"
-	docinto labels
-	dodoc "${S}"/example/3hole.ps
-	dodoc "${S}"/example/8.5x11.ps
-	dodoc "${S}"/example/DIN-A4.ps
-	dodoc "${S}"/example/DLT.ps
-	dodoc "${S}"/example/EXB-8500.ps
-	dodoc "${S}"/example/HP-DAT.ps
-	# Amanda example configs
-	einfo "Installing example configurations"
-	docinto example
-	dodoc "${S}"/example/*
-	docinto example1
-	newdoc "${FILESDIR}"/example_amanda.conf amanda.conf
-	newdoc "${FILESDIR}"/example_disklist-2.5.1_p3-r1 disklist
-	newdoc "${FILESDIR}"/example_global.conf global.conf
-	docinto example2
-	newdoc "${S}"/example/amanda.conf amanda.conf
-	newdoc "${S}"/example/disklist disklist
-	# Compress it all
-	prepalldocs
-
-	# Just make sure it exists for XFS to work...
-	use !sparc && use xfs && keepdir /var/xfsdump/inventory
-
-	insinto /etc/amanda
-	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
-
-	cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 \
-		>>"${D}"/etc/amanda/amandahosts
-	use minimal \
-	|| cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 \
-		>>"${D}"/etc/amanda/amandahosts
-
-	dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}"/.amandahosts
-	insinto "${AMANDA_USER_HOMEDIR}"
-	einfo "Installing .profile for ${AMANDA_USER_NAME} user"
-	newins "${MYFILESDIR}"/amanda-profile .profile
-
-	einfo "Installing Sample Daily Cron Job for Amanda"
-	CRONDIR=/etc/cron.daily/
-	exeinto ${CRONDIR}
-	newexe "${MYFILESDIR}"/amanda-cron amanda
-	# Not executable by default
-	fperms 644 ${CRONDIR}/amanda
-
-	insinto /etc/amanda/${AMANDA_CONFIG_NAME}
-	keepdir /etc/amanda
-	keepdir /etc/amanda/${AMANDA_CONFIG_NAME}
-
-	local i
-	for i in ${AMANDA_USER_HOMEDIR} ${AMANDA_TAR_LISTDIR} \
-		${AMANDA_TMPDIR} ${AMANDA_TMPDIR}/dumps \
-		${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME} \
-		/etc/amanda /etc/amanda/${AMANDA_CONFIG_NAME}; do
-		einfo "Securing directory (${i})"
-		dodir ${i}
-		keepdir ${i}
-		fowners ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
-		fperms 700 ${i}
-	done
-
-	einfo "Setting setuid permissions"
-	amanda_permissions_fix "${D}"
-
-	# DevFS
-	einfo "Installing DevFS config file"
-	insinto /etc/devfs.d
-	newins "${MYFILESDIR}"/amanda-devfs amanda
-
-	# Env.d
-	einfo "Installing environment config file"
-	doenvd "${MYFILESDIR}"/${ENVDFILE}
-
-	# Installing Amanda Xinetd Services Definition
-	einfo "Installing xinetd service file"
-	insinto /etc/xinetd.d
-	newins "${MYFILESDIR}"/amanda-xinetd-2.6.0_p2-r2 amanda
-
-}
-
-do_initial() {
-	path="$1"
-	shift
-	for i in $* ; do
-		einfo "Creating inital Amanda file (${i}) in $path"
-		touch "${ROOT}"/${path}/${i}
-		chown ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} "${ROOT}"/${path}/${i}
-		chmod 600 "${ROOT}"/${path}/${i}
-	done
-}
-
-pkg_postinst() {
-	local aux="${ROOT}"/${TMPINSTENVFILE}
-	[ ! -f "${aux}" ] && die "Variable setting file (${aux}) should exist!"
-	source "${aux}"
-	rm "${aux}"
-	rmdir "${ROOT}"/${MYINSTTMPDIR} 2>/dev/null # ignore error
-
-	# Migration of amandates from /etc to $localstatedir/amanda
-	if [ -f "${ROOT}/etc/amandates" -a \
-		! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
-		einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
-		einfo "A backup is also placed at /etc/amandates.orig"
-		cp -f "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig"
-		mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/"
-		cp -f "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates"
-	fi
-	if [ -f "${ROOT}/etc/amandates" ]; then
-		einfo "If you have migrated safely, please delete /etc/amandates"
-	fi
-	# Do setups
-	do_initial /etc dumpdates
-	do_initial "${AMANDA_USER_HOMEDIR}/amanda" amandates
-
-	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
-	# another host than HOSTNAME.
-	if use minimal; then
-		if [[ "${AMANDA_SERVER}" = "${HOSTNAME}" ]]; then
-			echo
-			ewarn "You are installing a client-only version of Amanda."
-			ewarn "You should set the variable $AMANDA_SERVER to point at your"
-			ewarn "Amanda-tape-server, otherwise you will have to specify its name"
-			ewarn "when using amrecover on the client."
-			ewarn "For example: Use something like"
-			ewarn "AMANDA_SERVER=\"myserver\" emerge amanda"
-			echo
-		fi
-	fi
-
-	einfo "Checking setuid permissions"
-	amanda_permissions_fix "${ROOT}"
-
-	elog "You should configure Amanda in /etc/amanda now."
-	elog
-	elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
-	elog "and restart xinetd afterwards!"
-	elog
-	elog "Otherwise, please look at /usr/share/doc/${P}/inetd.amanda.sample"
-	elog "as an example of how to configure your inetd."
-	elog
-	elog "NOTICE: If you need raw access to partitions you need to add the"
-	elog "amanda user to the 'disk' group and uncomment following lines in"
-	elog "your /etc/devfs.d/amanda:"
-	elog "SCSI:"
-	elog "REGISTER   ^scsi/host.*/bus.*/target.*/lun.*/part[0-9]  PERMISSIONS root.disk 660"
-	elog "IDE:"
-	elog "REGISTER   ^ide/host.*/bus.*/target.*/lun.*/part[0-9]   PERMISSIONS root.disk 660"
-	elog
-	elog "NOTICE: If you have a tape changer, also uncomment the following"
-	elog "REGISTER   ^scsi/host.*/bus.*/target.*/lun.*/generic    PERMISSIONS root.disk 660"
-	elog
-	elog "If you use localhost in your disklist your restores may break."
-	elog "You should replace it with the actual hostname!"
-	elog "Please also see the syntax changes to amandahosts."
-}
-
-# We have had reports of amanda file permissions getting screwed up.
-# Losing setuid, becoming too lax etc.
-# ONLY root and users in the amanda group should be able to run these binaries!
-amanda_permissions_fix() {
-	local root="$1"
-	[ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
-	local le="/usr/libexec/amanda"
-	for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
-		"${le}"/rundump "${le}"/runtar "${le}"/dumper \
-		"${le}"/planner ; do
-		chown root:${AMANDA_GROUP_NAME} "${root}"/${i}
-		chmod u=srwx,g=rx,o= "${root}"/${i}
-	done
-}
diff --git a/app-backup/amanda/amanda-2.6.0_p2-r3.ebuild b/app-backup/amanda/amanda-2.6.0_p2-r3.ebuild
deleted file mode 100644
index 5e1f6595f2e9..000000000000
--- a/app-backup/amanda/amanda-2.6.0_p2-r3.ebuild
+++ /dev/null
@@ -1,494 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-2.6.0_p2-r3.ebuild,v 1.2 2008/09/24 09:20:49 robbat2 Exp $
-
-inherit autotools eutils
-
-DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
-HOMEPAGE="http://www.amanda.org/"
-SRC_URI="mirror://sourceforge/amanda/${P/_/}.tar.gz"
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
-RDEPEND="sys-libs/readline
-		virtual/inetd
-		sys-apps/gawk
-		app-arch/tar
-		dev-lang/perl
-		app-arch/dump
-		net-misc/openssh
-		dev-libs/glib
-		s3? ( net-misc/curl )
-		samba? ( net-fs/samba )
-		kerberos? ( app-crypt/mit-krb5 )
-		!sparc? ( xfs? ( sys-fs/xfsdump ) )
-		!minimal? ( virtual/mailx
-			app-arch/mt-st
-			sys-block/mtx
-			sci-visualization/gnuplot
-			app-crypt/aespipe
-			app-crypt/gnupg )"
-
-DEPEND="${RDEPEND}
-	sys-devel/autoconf
-	sys-devel/automake"
-
-IUSE="berkdb debug gdbm minimal s3 samba xfs kerberos"
-
-S="${WORKDIR}/${P/_/}"
-MYFILESDIR="${WORKDIR}/files"
-MYTMPDIR="${WORKDIR}/tmp"
-MYINSTTMPDIR="/usr/share/amanda"
-ENVDIR="/etc/env.d"
-ENVDFILE="97amanda"
-TMPENVFILE="${MYTMPDIR}/${ENVDFILE}"
-TMPINSTENVFILE="${MYINSTTMPDIR}/tmpenv-${ENVDFILE}"
-
-# This is a complete list of Amanda settings that the ebuild takes from the
-# build environment. This allows users to alter the behavior of the package as
-# upstream intended, but keeping with Gentoo style. We store a copy of them in
-# /etc/env.d/97amanda during the install, so that they are preserved for future
-# installed. This variable name must not start with AMANDA_, as we do not want
-# it captured into the env file.
-ENV_SETTINGS_AMANDA="
-AMANDA_GROUP_GID AMANDA_GROUP_NAME
-AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
-AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX
-AMANDA_TAR_LISTDIR AMANDA_TAR
-AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
-AMANDA_CONFIG_NAME AMANDA_TMPDIR AMANDA_MAX_TAPE_BLOCK_KB"
-
-amanda_variable_setup() {
-
-	# Setting vars
-	local currentamanda
-
-	# Grab the current settings
-	currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
-	use debug && einfo "Current settings: ${currentamanda}"
-	#for i in ${currentamanda}; do
-	#	eval `eval echo ${i}`
-	#	echo "Setting: ${i}"
-	#done;
-
-	# First we set the defaults
-	[ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87
-	[ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda
-	[ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda
-	[ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87
-	[ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=-1
-	[ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda
-	[ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
-
-	# This installs Amanda, with the server. However, it could be a client,
-	# just specify an alternate server name in AMANDA_SERVER.
-	[ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}"
-	[ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
-	[ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
-	[ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
-	[ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1
-	[ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda
-	[ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
-	# These are left empty by default
-	[ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP=
-	[ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP=
-	[ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH=
-	[ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS=
-
-	# What tar to use
-	[ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar
-
-	# Text mode is the only one left.
-	AMANDA_DBMODE='text'
-
-	# Raise maximum configurable blocksize
-	[ -z "${AMANDA_MAX_TAPE_BLOCK_KB}" ] && AMANDA_MAX_TAPE_BLOCK_KB=512
-
-	# Now pull in the old stuff
-	if [ -f "${ENVDIR}/${ENVDFILE}" ]; then
-		# We don't just source it as we don't want everything in there.
-		eval $(egrep "^AMANDA_" ${ENVDIR}/${ENVDFILE} | grep -v '^AMANDA_ENV_SETTINGS')
-	fi
-
-	# Re-apply the new settings if any
-	[ -n "${currentamanda}" ] && eval `echo "${currentamanda}"`
-
-}
-
-pkg_setup() {
-	# Now add users if needed
-	[ -n "${AMANDA_DBMODE}" -a "${AMANDA_DBMODE}" != "text" ] && \
-		ewarn "Using db or gdbm modes for the database is no longer supported."
-	amanda_variable_setup
-	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
-	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
-}
-
-src_unpack() {
-	unpack ${A}
-
-	# Gentoo bug #192296, chg-multi fails
-	#EPATCH_OPTS="-d ${S}" epatch \
-	#	"${FILESDIR}"/${PN}-2.5.2_p1-chg-multi.patch \
-	#	|| die "Failed to apply patch to correct typo in chg-multi!"
-
-	# Gentoo bug #212970, --as-needed linking
-	#EPATCH_OPTS="-d ${S}" epatch \
-	#	"${FILESDIR}"/${PN}-2.5.2_p1-fix-asneeded.patch \
-	#	|| die "Failed to apply patch to correct bug #212970!"
-
-	# Fix a fun race condition if you use encryption.
-	# This is one of the reasons you should test your recovery procedures often.
-	EPATCH_OPTS="-d ${S} -p1" epatch \
-		"${FILESDIR}"/${PN}-2.6.0p2-amcrypt-ossl-asym-race-fix.patch \
-		|| die "Failed to apply race fix for encryption"
-
-	cd "${S}"
-	epatch "${FILESDIR}"/s3-list-keys.diff
-	cd "${S}"/device-src
-	epatch "${FILESDIR}"/s3.c.part2.diff
-
-	cd "${S}"
-	#sed -i 's,amanda_working_ipv6,amanda_cv_working_ipv6,g' \
-	#	"${S}"/configure.in || die "failed to sed"
-	# rm -f "${S}"/acinclude.m4
-	eautomake
-
-	# now the real fun
-	amanda_variable_setup
-	# places for us to work in
-	mkdir -p "${MYFILESDIR}" "${MYTMPDIR}"
-	# Now we store the settings we just created
-	set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}"
-}
-
-src_compile() {
-	# fix bug #36316
-	addpredict /var/cache/samba/gencache.tdb
-
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-	local myconf
-	cd "${S}"
-
-	einfo "Using '${AMANDA_DBMODE}' style database"
-	myconf="${myconf} --with-db=${AMANDA_DBMODE}"
-	einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
-	myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
-	einfo "Using ${AMANDA_SERVER_INDEX} for index server."
-	myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
-	einfo "Using ${AMANDA_USER_NAME} for amanda user."
-	myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
-	einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
-	myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
-	einfo "Using ${AMANDA_TAR} as Tar implementation."
-	myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
-	einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
-	myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
-	einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
-	myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
-	einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
-	myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
-
-	if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
-		eerror "If you want _both_ UDP and TCP ports, please use only the"
-		eerror "AMANDA_PORTS environment variable for identical ports, or set"
-		eerror "AMANDA_PORTS_BOTH."
-		die "Bad port setup!"
-	fi
-	if [ -n "${AMANDA_PORTS_UDP}" ]; then
-		einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
-		myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
-	fi
-	if [ -n "${AMANDA_PORTS_TCP}" ]; then
-		einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
-		myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
-	fi
-	if [ -n "${AMANDA_PORTS}" ]; then
-		einfo "Using ports ${AMANDA_PORTS/,/-}"
-		myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
-	fi
-
-	# Extras
-	# Speed option
-	myconf="${myconf} --with-buffered-dump"
-	# "debugging" in the configuration is NOT debug in the conventional sense.
-	# It is actually just useful output in the application, and should remain
-	# enabled. There are some cases of breakage with MTX tape changers as of
-	# 2.5.1p2 that it exposes when turned off as well.
-	myconf="${myconf} --with-debugging"
-	# Where to put our files
-	myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
-
-	# Samba support
-	myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`"
-
-	# Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
-	# default
-	myconf="${myconf} --with-bsd-security"
-	myconf="${myconf} --with-ssh-security"
-	myconf="${myconf} --with-bsdudp-security"
-	myconf="${myconf} --with-bsdtcp-security"
-
-	# kerberos-security mechanism version 4
-	# always disable, per bug #173354
-	myconf="${myconf} --without-krb4-security"
-
-	# kerberos-security mechanism version 5
-	myconf="${myconf} `use_with kerberos krb5-security`"
-
-	# Amazon S3 support
-	myconf="${myconf} `use_enable s3 s3-device`"
-	myconf="${myconf} `use_enable s3 devpay`"
-
-	# Client only, as requested in bug #127725
-	use minimal && myconf="${myconf} --without-server"
-
-	# Raise maximum configurable blocksize
-	myconf="${myconf} --with-maxtapeblocksize=${AMANDA_MAX_TAPE_BLOCK_KB}"
-
-	econf ${myconf} || die "econf failed!"
-	emake -j1 || die "emake failed!"
-
-	# Compile the tapetype program too
-	# This is deprecated, use amtapetype instead!
-	# cd tape-src
-	# emake tapetype || die "emake tapetype failed!"
-
-	# Only needed if you we do versioning
-	#dosed "s,/usr/local/bin/perl,/usr/bin/perl," ${S}/contrib/set_prod_link.pl
-	#perl ${S}/contrib/set_prod_link.pl
-
-}
-
-src_install() {
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source ${TMPENVFILE}
-
-	einfo "Doing stock install"
-	emake -j1 DESTDIR="${D}" install || die
-
-	# Prepare our custom files
-	einfo "Building custom configuration files"
-	cp "${FILESDIR}"/amanda-* "${MYFILESDIR}"
-	local i # our iterator
-	local sedexpr # var for sed expr
-	sedexpr=''
-	for i in ${ENV_SETTINGS_AMANDA} ; do
-		local val
-		eval "val=\"\${${i}}\""
-		sedexpr="${sedexpr}s|__${i}__|${val}|g;"
-	done
-	#einfo "Compiled SED expression: '${sedexpr}'"
-
-	# now apply the sed expr
-	for i in "${FILESDIR}"/amanda-* ; do
-		local filename
-		filename="`basename ${i}`"
-		#einfo "Applying compiled SED expression to ${filename}"
-		sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}"/${filename}
-	done
-
-	# Build the envdir file
-	# Don't forget this..
-	einfo "Building environment file"
-	local t
-	t="${MYFILESDIR}"/${ENVDFILE}
-	echo "# These settings are what was present in the environment when this" >>"${t}"
-	echo "# Amanda was compiled.  Changing anything below this comment will" >>"${t}"
-	echo "# have no effect on your application, but it merely exists to" >>"${t}"
-	echo "# preserve them for your next emerge of Amanda" >>"${t}"
-	cat "${TMPENVFILE}" | sed "s,=\$,='',g" >>"${t}"
-
-	into /usr
-
-	# Deprecated, use amtapetype instead
-	#einfo "Installing tapetype utility"
-	#newsbin tape-src/tapetype tapetype
-
-	# docs
-	einfo "Installing documentation"
-	dodoc AUTHORS C* INSTALL NEWS README
-	# Clean up some bits
-	dodoc /usr/share/amanda/*
-	rm -rf "${D}"/usr/share/amanda
-	mkdir -p "${D}"/${MYINSTTMPDIR} || die
-	cp "${TMPENVFILE}" "${D}"/${TMPINSTENVFILE} || die
-	# our inetd sample
-	einfo "Installing standard inetd sample"
-	newdoc "${MYFILESDIR}"/amanda-inetd.amanda.sample-2.6.0_p2-r2 amanda-inetd.amanda.sample
-	# Stock extra docs
-	docinto docs
-	dodoc "${S}"/docs/*
-	# Labels
-	einfo "Installing labels"
-	docinto labels
-	dodoc "${S}"/example/3hole.ps
-	dodoc "${S}"/example/8.5x11.ps
-	dodoc "${S}"/example/DIN-A4.ps
-	dodoc "${S}"/example/DLT.ps
-	dodoc "${S}"/example/EXB-8500.ps
-	dodoc "${S}"/example/HP-DAT.ps
-	# Amanda example configs
-	einfo "Installing example configurations"
-	docinto example
-	dodoc "${S}"/example/*
-	docinto example1
-	newdoc "${FILESDIR}"/example_amanda.conf amanda.conf
-	newdoc "${FILESDIR}"/example_disklist-2.5.1_p3-r1 disklist
-	newdoc "${FILESDIR}"/example_global.conf global.conf
-	docinto example2
-	newdoc "${S}"/example/amanda.conf amanda.conf
-	newdoc "${S}"/example/disklist disklist
-	# Compress it all
-	prepalldocs
-
-	# Just make sure it exists for XFS to work...
-	use !sparc && use xfs && keepdir /var/xfsdump/inventory
-
-	insinto /etc/amanda
-	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
-
-	cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 \
-		>>"${D}"/etc/amanda/amandahosts
-	use minimal \
-	|| cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 \
-		>>"${D}"/etc/amanda/amandahosts
-
-	dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}"/.amandahosts
-	insinto "${AMANDA_USER_HOMEDIR}"
-	einfo "Installing .profile for ${AMANDA_USER_NAME} user"
-	newins "${MYFILESDIR}"/amanda-profile .profile
-
-	einfo "Installing Sample Daily Cron Job for Amanda"
-	CRONDIR=/etc/cron.daily/
-	exeinto ${CRONDIR}
-	newexe "${MYFILESDIR}"/amanda-cron amanda
-	# Not executable by default
-	fperms 644 ${CRONDIR}/amanda
-
-	insinto /etc/amanda/${AMANDA_CONFIG_NAME}
-	keepdir /etc/amanda
-	keepdir /etc/amanda/${AMANDA_CONFIG_NAME}
-
-	local i
-	for i in ${AMANDA_USER_HOMEDIR} ${AMANDA_TAR_LISTDIR} \
-		${AMANDA_TMPDIR} ${AMANDA_TMPDIR}/dumps \
-		${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME} \
-		/etc/amanda /etc/amanda/${AMANDA_CONFIG_NAME}; do
-		einfo "Securing directory (${i})"
-		dodir ${i}
-		keepdir ${i}
-		fowners ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
-		fperms 700 ${i}
-	done
-
-	einfo "Setting setuid permissions"
-	amanda_permissions_fix "${D}"
-
-	# DevFS
-	einfo "Installing DevFS config file"
-	insinto /etc/devfs.d
-	newins "${MYFILESDIR}"/amanda-devfs amanda
-
-	# Env.d
-	einfo "Installing environment config file"
-	doenvd "${MYFILESDIR}"/${ENVDFILE}
-
-	# Installing Amanda Xinetd Services Definition
-	einfo "Installing xinetd service file"
-	insinto /etc/xinetd.d
-	newins "${MYFILESDIR}"/amanda-xinetd-2.6.0_p2-r2 amanda
-
-}
-
-do_initial() {
-	path="$1"
-	shift
-	for i in $* ; do
-		einfo "Creating inital Amanda file (${i}) in $path"
-		touch "${ROOT}"/${path}/${i}
-		chown ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} "${ROOT}"/${path}/${i}
-		chmod 600 "${ROOT}"/${path}/${i}
-	done
-}
-
-pkg_postinst() {
-	local aux="${ROOT}"/${TMPINSTENVFILE}
-	[ ! -f "${aux}" ] && die "Variable setting file (${aux}) should exist!"
-	source "${aux}"
-	rm "${aux}"
-	rmdir "${ROOT}"/${MYINSTTMPDIR} 2>/dev/null # ignore error
-
-	# Migration of amandates from /etc to $localstatedir/amanda
-	if [ -f "${ROOT}/etc/amandates" -a \
-		! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
-		einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
-		einfo "A backup is also placed at /etc/amandates.orig"
-		cp -f "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig"
-		mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/"
-		cp -f "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates"
-	fi
-	if [ -f "${ROOT}/etc/amandates" ]; then
-		einfo "If you have migrated safely, please delete /etc/amandates"
-	fi
-	# Do setups
-	do_initial /etc dumpdates
-	do_initial "${AMANDA_USER_HOMEDIR}/amanda" amandates
-
-	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
-	# another host than HOSTNAME.
-	if use minimal; then
-		if [[ "${AMANDA_SERVER}" = "${HOSTNAME}" ]]; then
-			echo
-			ewarn "You are installing a client-only version of Amanda."
-			ewarn "You should set the variable $AMANDA_SERVER to point at your"
-			ewarn "Amanda-tape-server, otherwise you will have to specify its name"
-			ewarn "when using amrecover on the client."
-			ewarn "For example: Use something like"
-			ewarn "AMANDA_SERVER=\"myserver\" emerge amanda"
-			echo
-		fi
-	fi
-
-	einfo "Checking setuid permissions"
-	amanda_permissions_fix "${ROOT}"
-
-	elog "You should configure Amanda in /etc/amanda now."
-	elog
-	elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
-	elog "and restart xinetd afterwards!"
-	elog
-	elog "Otherwise, please look at /usr/share/doc/${P}/inetd.amanda.sample"
-	elog "as an example of how to configure your inetd."
-	elog
-	elog "NOTICE: If you need raw access to partitions you need to add the"
-	elog "amanda user to the 'disk' group and uncomment following lines in"
-	elog "your /etc/devfs.d/amanda:"
-	elog "SCSI:"
-	elog "REGISTER   ^scsi/host.*/bus.*/target.*/lun.*/part[0-9]  PERMISSIONS root.disk 660"
-	elog "IDE:"
-	elog "REGISTER   ^ide/host.*/bus.*/target.*/lun.*/part[0-9]   PERMISSIONS root.disk 660"
-	elog
-	elog "NOTICE: If you have a tape changer, also uncomment the following"
-	elog "REGISTER   ^scsi/host.*/bus.*/target.*/lun.*/generic    PERMISSIONS root.disk 660"
-	elog
-	elog "If you use localhost in your disklist your restores may break."
-	elog "You should replace it with the actual hostname!"
-	elog "Please also see the syntax changes to amandahosts."
-}
-
-# We have had reports of amanda file permissions getting screwed up.
-# Losing setuid, becoming too lax etc.
-# ONLY root and users in the amanda group should be able to run these binaries!
-amanda_permissions_fix() {
-	local root="$1"
-	[ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
-	local le="/usr/libexec/amanda"
-	for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
-		"${le}"/rundump "${le}"/runtar "${le}"/dumper \
-		"${le}"/planner ; do
-		chown root:${AMANDA_GROUP_NAME} "${root}"/${i}
-		chmod u=srwx,g=rx,o= "${root}"/${i}
-	done
-}
diff --git a/app-backup/amanda/amanda-3.1.2.ebuild b/app-backup/amanda/amanda-3.1.2.ebuild
deleted file mode 100644
index a3afca2087f3..000000000000
--- a/app-backup/amanda/amanda-3.1.2.ebuild
+++ /dev/null
@@ -1,413 +0,0 @@
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-3.1.2.ebuild,v 1.1 2010/09/10 19:38:52 robbat2 Exp $
-
-inherit autotools eutils
-
-MY_P="${P/_}"
-DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
-HOMEPAGE="http://www.amanda.org/"
-SRC_URI="mirror://sourceforge/amanda/${MY_P}.tar.gz"
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
-RDEPEND="sys-libs/readline
-	virtual/inetd
-	sys-apps/gawk
-	app-arch/tar
-	>=dev-lang/perl-5.6
-	app-arch/dump
-	net-misc/openssh
-	>=dev-libs/glib-2.24.0
-	nls? ( virtual/libintl )
-	s3? ( >=net-misc/curl-7.10.0 )
-	samba? ( net-fs/samba )
-	kerberos? ( app-crypt/mit-krb5 )
-	xfs? ( sys-fs/xfsdump )
-	!minimal? (
-		virtual/mailx
-		app-arch/mt-st
-		sys-block/mtx
-		gnuplot? ( sci-visualization/gnuplot )
-		app-crypt/aespipe
-		app-crypt/gnupg
-	)"
-
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	nls? ( sys-devel/gettext )"
-
-IUSE="gnuplot ipv6 kerberos minimal nls s3 samba xfs"
-
-S="${WORKDIR}/${MY_P}"
-
-MYFILESDIR="${T}/files"
-ENVDIR="/etc/env.d"
-ENVDFILE="97amanda"
-TMPENVFILE="${T}/${ENVDFILE}"
-
-# This is a complete list of Amanda settings that the ebuild takes from the
-# build environment. This allows users to alter the behavior of the package as
-# upstream intended, but keeping with Gentoo style. We store a copy of them in
-# /etc/env.d/97amanda during the install, so that they are preserved for future
-# installed. This variable name must not start with AMANDA_, as we do not want
-# it captured into the env file.
-ENV_SETTINGS_AMANDA="
-AMANDA_GROUP_GID AMANDA_GROUP_NAME
-AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
-AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX
-AMANDA_TAR_LISTDIR AMANDA_TAR
-AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
-AMANDA_CONFIG_NAME AMANDA_TMPDIR"
-
-amanda_variable_setup() {
-
-	# Setting vars
-	local currentamanda
-
-	# Grab the current settings
-	currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
-
-	# First we set the defaults
-	[ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87
-	[ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda
-	[ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda
-	[ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87
-	[ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash
-	[ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda
-	[ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
-
-	# This installs Amanda, with the server. However, it could be a client,
-	# just specify an alternate server name in AMANDA_SERVER.
-	[ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}"
-	[ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
-	[ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
-	[ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
-	[ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1
-	[ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda
-	[ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
-	# These are left empty by default
-	[ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP=
-	[ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP=
-	[ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH=
-	[ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS=
-
-	# What tar to use
-	[ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar
-
-	# Now pull in the old stuff
-	if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then
-		# We don't just source it as we don't want everything in there.
-		eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS')
-	fi
-
-	# Re-apply the new settings if any
-	[ -n "${currentamanda}" ] && eval `echo "${currentamanda}"`
-
-}
-
-pkg_setup() {
-	amanda_variable_setup
-	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
-	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
-}
-
-src_unpack() {
-	unpack ${A}
-	cd "${S}"
-
-	# Fix a fun race condition if you use encryption.
-	# This is one of the reasons you should test your recovery procedures often.
-	#epatch "${FILESDIR}"/${PN}-2.6.0p2-amcrypt-ossl-asym-race-fix.patch
-
-	# gentoo bug 248838, check /sbin stuff before /bin
-	#epatch "${FILESDIR}"/${PN}-2.6.0_p2-syslocpath.patch
-
-	eautoreconf
-
-	# places for us to work in
-	mkdir -p "${MYFILESDIR}"
-	# Now we store the settings we just created
-	set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}"
-
-	# Prepare our custom files
-	einfo "Building custom configuration files"
-	local i # our iterator
-	local sedexpr # var for sed expr
-	sedexpr=''
-	for i in ${ENV_SETTINGS_AMANDA} ; do
-		local val
-		eval "val=\"\${${i}}\""
-		sedexpr="${sedexpr}s|__${i}__|${val}|g;"
-	done
-
-	# now apply the sed expr
-	for i in "${FILESDIR}"/amanda-* ; do
-		sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`"
-	done
-
-	(
-		cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1
-		use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1
-	) > "${T}"/amandahosts
-}
-
-src_compile() {
-	# fix bug #36316
-	addpredict /var/cache/samba/gencache.tdb
-
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-	local myconf
-
-	einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
-	myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
-	einfo "Using ${AMANDA_SERVER_INDEX} for index server."
-	myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
-	einfo "Using ${AMANDA_USER_NAME} for amanda user."
-	myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
-	einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
-	myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
-	einfo "Using ${AMANDA_TAR} as Tar implementation."
-	myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
-	einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
-	myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
-	einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
-	myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
-	einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
-	myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
-
-	if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
-		eerror "If you want _both_ UDP and TCP ports, please use only the"
-		eerror "AMANDA_PORTS environment variable for identical ports, or set"
-		eerror "AMANDA_PORTS_BOTH."
-		die "Bad port setup!"
-	fi
-	if [ -n "${AMANDA_PORTS_UDP}" ]; then
-		einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
-		myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
-	fi
-	if [ -n "${AMANDA_PORTS_TCP}" ]; then
-		einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
-		myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
-	fi
-	if [ -n "${AMANDA_PORTS}" ]; then
-		einfo "Using ports ${AMANDA_PORTS/,/-}"
-		myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
-	fi
-
-	# Extras
-	# Speed option
-	myconf="${myconf} --with-buffered-dump"
-	# "debugging" in the configuration is NOT debug in the conventional sense.
-	# It is actually just useful output in the application, and should remain
-	# enabled. There are some cases of breakage with MTX tape changers as of
-	# 2.5.1p2 that it exposes when turned off as well.
-	myconf="${myconf} --with-debugging"
-	# Where to put our files
-	myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
-
-	# Samba support
-	myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`"
-
-	# Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
-	# default
-	myconf="${myconf} --with-bsd-security"
-	myconf="${myconf} --with-ssh-security"
-	myconf="${myconf} --with-bsdudp-security"
-	myconf="${myconf} --with-bsdtcp-security"
-
-	# kerberos-security mechanism version 4
-	# always disable, per bug #173354
-	myconf="${myconf} --without-krb4-security"
-
-	# kerberos-security mechanism version 5
-	myconf="${myconf} `use_with kerberos krb5-security`"
-
-	# Amazon S3 support
-	myconf="${myconf} `use_enable s3 s3-device`"
-
-	# Client only, as requested in bug #127725
-	if use minimal ; then
-		myconf="${myconf} --without-server"
-	else
-		# amplot
-		myconf="${myconf} $(use_with gnuplot)"
-	fi
-
-	# IPv6 fun.
-	myconf="${myconf} `use_with ipv6`"
-
-	# I18N
-	myconf="${myconf} `use_enable nls`"
-
-	econf ${myconf} || die "econf failed!"
-	emake || die "emake failed!"
-}
-
-src_install() {
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source ${TMPENVFILE}
-
-	einfo "Doing stock install"
-	# parallel make install b0rked
-	emake -j1 DESTDIR="${D}" install || die
-
-	# Build the envdir file
-	# Don't forget this..
-	einfo "Building environment file"
-	(
-		echo "# These settings are what was present in the environment when this"
-		echo "# Amanda was compiled.  Changing anything below this comment will"
-		echo "# have no effect on your application, but it merely exists to"
-		echo "# preserve them for your next emerge of Amanda"
-		cat "${TMPENVFILE}" | sed "s,=\$,='',g"
-	) >> "${MYFILESDIR}/${ENVDFILE}"
-
-	# Env.d
-	einfo "Installing environment config file"
-	doenvd "${MYFILESDIR}/${ENVDFILE}"
-
-	# Lock down next section (up until docs).
-	insopts -m0640
-	# Installing Amanda Xinetd Services Definition
-	einfo "Installing xinetd service file"
-	insinto /etc/xinetd.d
-	if use minimal ; then
-		newins "${MYFILESDIR}"/amanda-xinetd-${PV}-client amanda
-	else
-		newins "${MYFILESDIR}"/amanda-xinetd-${PV}-server amanda
-	fi
-
-	einfo "Installing Sample Daily Cron Job for Amanda"
-	insinto /etc/cron.daily
-	newins "${MYFILESDIR}/amanda-cron" amanda
-
-	insinto /etc/amanda
-	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
-	doins "${T}/amandahosts"
-	fperms 600 /etc/amanda/amandahosts
-
-	dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts"
-	insinto "${AMANDA_USER_HOMEDIR}"
-	einfo "Installing .profile for ${AMANDA_USER_NAME} user"
-	newins "${MYFILESDIR}/amanda-profile" .profile
-
-	insinto /etc/amanda
-	doins "${S}/example/amanda-client.conf"
-	if ! use minimal ; then
-		insinto "/etc/amanda/${AMANDA_CONFIG_NAME}"
-		doins "${S}/example/amanda.conf"
-		doins "${S}/example/disklist"
-		keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index"
-	fi
-
-	keepdir "${AMANDA_TAR_LISTDIR}"
-	keepdir "${AMANDA_USER_HOMEDIR}/amanda"
-	keepdir "${AMANDA_TMPDIR}/dumps"
-	# Just make sure it exists for XFS to work...
-	use xfs && keepdir /var/xfsdump/inventory
-
-	local i
-	for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
-		"${AMANDA_TMPDIR}" /etc/amanda; do
-		einfo "Securing directory (${i})"
-		fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
-	done
-	# Do NOT use -R
-	fperms 0700 \
-		"${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
-		"${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \
-		 "${AMANDA_USER_HOMEDIR}/amanda" \
-		 "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \
-		 /etc/amanda /etc/amanda/${AMANDA_CONFIG_NAME}
-
-	einfo "Setting setuid permissions"
-	amanda_permissions_fix "${D}"
-
-	# Relax permissions again
-	insopts -m0644
-
-	# docs
-	einfo "Installing documentation"
-	dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING
-	# our inetd sample
-	einfo "Installing standard inetd sample"
-	newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample
-	# Amanda example configs
-	einfo "Installing example configurations"
-	rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes}
-	mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/"
-	docinto example1
-	newdoc "${FILESDIR}/example_amanda.conf" amanda.conf
-	newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist
-	newdoc "${FILESDIR}/example_global.conf" global.conf
-}
-
-pkg_postinst() {
-	[ ! -f "${TMPENVFILE}" -a "$EMERGE_FROM" == "binary" ] && \
-		TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}"
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-
-	# Migration of amandates from /etc to $localstatedir/amanda
-	if [ -f "${ROOT}/etc/amandates" -a \
-		! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
-		einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
-		einfo "A backup is also placed at /etc/amandates.orig"
-		cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig"
-		mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/"
-		cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates"
-	fi
-	if [ -f "${ROOT}/etc/amandates" ]; then
-		einfo "If you have migrated safely, please delete /etc/amandates"
-	fi
-
-	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
-	# another host than HOSTNAME.
-	if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
-		elog "You are installing a client-only version of Amanda."
-		elog "You should set the variable \$AMANDA_SERVER to point at your"
-		elog "Amanda-tape-server, otherwise you will have to specify its name"
-		elog "when using amrecover on the client."
-		elog "For example: Use something like"
-		elog "AMANDA_SERVER=\"myserver\" emerge amanda"
-		elog
-	fi
-
-	einfo "Checking setuid permissions"
-	amanda_permissions_fix "${ROOT}"
-
-	elog "You should configure Amanda in /etc/amanda now."
-	elog
-	elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
-	elog "and restart xinetd afterwards!"
-	elog
-	elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample"
-	elog "as an example of how to configure your inetd."
-	elog
-	elog "NOTICE: If you need raw access to partitions you need to add the"
-	elog "amanda user to the 'disk' group."
-	elog
-	elog "NOTICE: If you have a tape changer, you need to add the amanda user"
-	elog "to the 'tape' group."
-	elog
-	elog "If you use localhost in your disklist your restores may break."
-	elog "You should replace it with the actual hostname!"
-	elog "Please also see the syntax changes to amandahosts."
-}
-
-# We have had reports of amanda file permissions getting screwed up.
-# Losing setuid, becoming too lax etc.
-# ONLY root and users in the amanda group should be able to run these binaries!
-amanda_permissions_fix() {
-	local root="$1"
-	[ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
-	local le="/usr/libexec/amanda"
-	for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
-		"${le}"/rundump "${le}"/runtar "${le}"/dumper \
-		"${le}"/planner ; do
-		chown root:${AMANDA_GROUP_NAME} "${root}"/${i}
-		chmod u=srwx,g=rx,o= "${root}"/${i}
-	done
-}
diff --git a/app-backup/amanda/amanda-3.2.0_beta1.ebuild b/app-backup/amanda/amanda-3.2.0_beta1.ebuild
deleted file mode 100644
index a21ee60f8cae..000000000000
--- a/app-backup/amanda/amanda-3.2.0_beta1.ebuild
+++ /dev/null
@@ -1,442 +0,0 @@
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-3.2.0_beta1.ebuild,v 1.2 2010/09/30 04:53:11 robbat2 Exp $
-
-EAPI=3
-inherit autotools eutils perl-module
-
-MY_P="${P/_}"
-DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
-HOMEPAGE="http://www.amanda.org/"
-SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz"
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
-RDEPEND="sys-libs/readline
-	virtual/inetd
-	sys-apps/gawk
-	app-arch/tar
-	>=dev-lang/perl-5.6
-	app-arch/dump
-	net-misc/openssh
-	>=dev-libs/glib-2.24.0
-	nls? ( virtual/libintl )
-	s3? ( >=net-misc/curl-7.10.0 )
-	samba? ( net-fs/samba )
-	kerberos? ( app-crypt/mit-krb5 )
-	xfs? ( sys-fs/xfsdump )
-	!minimal? (
-		virtual/mailx
-		app-arch/mt-st
-		sys-block/mtx
-		gnuplot? ( sci-visualization/gnuplot )
-		app-crypt/aespipe
-		app-crypt/gnupg
-	)"
-
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	nls? ( sys-devel/gettext )
-	>=app-text/docbook-xsl-stylesheets-1.72.0
-	app-text/docbook-xml-dtd
-	"
-
-IUSE="gnuplot ipv6 kerberos minimal nls s3 samba xfs"
-
-S="${WORKDIR}/${MY_P}"
-
-MYFILESDIR="${T}/files"
-ENVDIR="/etc/env.d"
-ENVDFILE="97amanda"
-TMPENVFILE="${T}/${ENVDFILE}"
-
-# This is a complete list of Amanda settings that the ebuild takes from the
-# build environment. This allows users to alter the behavior of the package as
-# upstream intended, but keeping with Gentoo style. We store a copy of them in
-# /etc/env.d/97amanda during the install, so that they are preserved for future
-# installed. This variable name must not start with AMANDA_, as we do not want
-# it captured into the env file.
-ENV_SETTINGS_AMANDA="
-AMANDA_GROUP_GID AMANDA_GROUP_NAME
-AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
-AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX
-AMANDA_TAR_LISTDIR AMANDA_TAR
-AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
-AMANDA_CONFIG_NAME AMANDA_TMPDIR"
-
-amanda_variable_setup() {
-
-	# Setting vars
-	local currentamanda
-
-	# Grab the current settings
-	currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
-
-	# First we set the defaults
-	[ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87
-	[ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda
-	[ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda
-	[ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87
-	[ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash
-	[ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda
-	[ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
-
-	# This installs Amanda, with the server. However, it could be a client,
-	# just specify an alternate server name in AMANDA_SERVER.
-	[ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}"
-	[ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
-	[ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
-	[ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
-	[ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1
-	[ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda
-	[ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
-	# These are left empty by default
-	[ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP=
-	[ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP=
-	[ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH=
-	[ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS=
-
-	# What tar to use
-	[ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar
-
-	# Now pull in the old stuff
-	if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then
-		# We don't just source it as we don't want everything in there.
-		eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS')
-	fi
-
-	# Re-apply the new settings if any
-	[ -n "${currentamanda}" ] && eval `echo "${currentamanda}"`
-
-}
-
-pkg_setup() {
-	amanda_variable_setup
-	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
-	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
-}
-
-src_unpack() {
-	# we do not want the perl src_unpack
-	base_src_unpack
-}
-
-src_prepare() {
-	# Fix a fun race condition if you use encryption.
-	# This is one of the reasons you should test your recovery procedures often.
-	#epatch "${FILESDIR}"/${PN}-2.6.0p2-amcrypt-ossl-asym-race-fix.patch
-
-	# gentoo bug 248838, check /sbin stuff before /bin
-	#epatch "${FILESDIR}"/${PN}-2.6.0_p2-syslocpath.patch
-
-	# gentoo bug #331111
-	sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am
-	sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am
-
-	eautoreconf
-
-	# places for us to work in
-	mkdir -p "${MYFILESDIR}"
-	# Now we store the settings we just created
-	set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}"
-
-	# Prepare our custom files
-	einfo "Building custom configuration files"
-	local i # our iterator
-	local sedexpr # var for sed expr
-	sedexpr=''
-	for i in ${ENV_SETTINGS_AMANDA} ; do
-		local val
-		eval "val=\"\${${i}}\""
-		sedexpr="${sedexpr}s|__${i}__|${val}|g;"
-	done
-
-	# now apply the sed expr
-	for i in "${FILESDIR}"/amanda-* ; do
-		sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`"
-	done
-
-	(
-		cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1
-		use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1
-	) > "${T}"/amandahosts
-}
-
-src_configure() {
-	# fix bug #36316
-	addpredict /var/cache/samba/gencache.tdb
-
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-	local myconf
-
-	einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
-	myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
-	einfo "Using ${AMANDA_SERVER_INDEX} for index server."
-	myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
-	einfo "Using ${AMANDA_USER_NAME} for amanda user."
-	myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
-	einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
-	myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
-	einfo "Using ${AMANDA_TAR} as Tar implementation."
-	myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
-	einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
-	myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
-	einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
-	myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
-	einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
-	myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
-
-	if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
-		eerror "If you want _both_ UDP and TCP ports, please use only the"
-		eerror "AMANDA_PORTS environment variable for identical ports, or set"
-		eerror "AMANDA_PORTS_BOTH."
-		die "Bad port setup!"
-	fi
-	if [ -n "${AMANDA_PORTS_UDP}" ]; then
-		einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
-		myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
-	fi
-	if [ -n "${AMANDA_PORTS_TCP}" ]; then
-		einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
-		myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
-	fi
-	if [ -n "${AMANDA_PORTS}" ]; then
-		einfo "Using ports ${AMANDA_PORTS/,/-}"
-		myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
-	fi
-
-	# Extras
-	# Speed option
-	myconf="${myconf} --with-buffered-dump"
-	# "debugging" in the configuration is NOT debug in the conventional sense.
-	# It is actually just useful output in the application, and should remain
-	# enabled. There are some cases of breakage with MTX tape changers as of
-	# 2.5.1p2 that it exposes when turned off as well.
-	myconf="${myconf} --with-debugging"
-	# Where to put our files
-	myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
-
-	# Samba support
-	myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`"
-
-	# Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
-	# default
-	myconf="${myconf} --with-bsd-security"
-	myconf="${myconf} --with-ssh-security"
-	myconf="${myconf} --with-bsdudp-security"
-	myconf="${myconf} --with-bsdtcp-security"
-
-	# kerberos-security mechanism version 4
-	# always disable, per bug #173354
-	myconf="${myconf} --without-krb4-security"
-
-	# kerberos-security mechanism version 5
-	myconf="${myconf} `use_with kerberos krb5-security`"
-
-	# Amazon S3 support
-	myconf="${myconf} `use_enable s3 s3-device`"
-
-	# Client only, as requested in bug #127725
-	if use minimal ; then
-		myconf="${myconf} --without-server"
-	else
-		# amplot
-		myconf="${myconf} $(use_with gnuplot)"
-	fi
-
-	# IPv6 fun.
-	myconf="${myconf} `use_with ipv6`"
-
-	# I18N
-	myconf="${myconf} `use_enable nls`"
-
-	# Bug #296634: Perl location
-	perlinfo
-	myconf="${myconf} --with-amperldir=${VENDOR_LIB}"
-
-	# Bug 296633: --disable-syntax-checks
-	# Some tests are not safe for production systems
-	myconf="${myconf} --disable-syntax-checks"
-
-	# build manpages
-	myconf="${myconf} --enable-manpage-build"
-
-	econf ${myconf} || die "econf failed!"
-}
-
-src_compile() {
-	# Again, do not want the perl-module src_compile
-	base_src_compile
-}
-
-src_install() {
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source ${TMPENVFILE}
-
-	einfo "Doing stock install"
-	# parallel make install b0rked
-	emake -j1 DESTDIR="${D}" install || die
-
-	# Build the envdir file
-	# Don't forget this..
-	einfo "Building environment file"
-	(
-		echo "# These settings are what was present in the environment when this"
-		echo "# Amanda was compiled.  Changing anything below this comment will"
-		echo "# have no effect on your application, but it merely exists to"
-		echo "# preserve them for your next emerge of Amanda"
-		cat "${TMPENVFILE}" | sed "s,=\$,='',g"
-	) >> "${MYFILESDIR}/${ENVDFILE}"
-
-	# Env.d
-	einfo "Installing environment config file"
-	doenvd "${MYFILESDIR}/${ENVDFILE}"
-
-	# Lock down next section (up until docs).
-	insopts -m0640
-	# Installing Amanda Xinetd Services Definition
-	einfo "Installing xinetd service file"
-	insinto /etc/xinetd.d
-	if use minimal ; then
-		newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda
-	else
-		newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda
-	fi
-
-	einfo "Installing Sample Daily Cron Job for Amanda"
-	insinto /etc/cron.daily
-	newins "${MYFILESDIR}/amanda-cron" amanda
-
-	insinto /etc/amanda
-	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
-	doins "${T}/amandahosts"
-	fperms 600 /etc/amanda/amandahosts
-
-	dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts"
-	insinto "${AMANDA_USER_HOMEDIR}"
-	einfo "Installing .profile for ${AMANDA_USER_NAME} user"
-	newins "${MYFILESDIR}/amanda-profile" .profile
-
-	insinto /etc/amanda
-	doins "${S}/example/amanda-client.conf"
-	if ! use minimal ; then
-		insinto "/etc/amanda/${AMANDA_CONFIG_NAME}"
-		doins "${S}/example/amanda.conf"
-		doins "${S}/example/disklist"
-		keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index"
-	fi
-
-	keepdir "${AMANDA_TAR_LISTDIR}"
-	keepdir "${AMANDA_USER_HOMEDIR}/amanda"
-	keepdir "${AMANDA_TMPDIR}/dumps"
-	# Just make sure it exists for XFS to work...
-	use xfs && keepdir /var/xfsdump/inventory
-
-	local i
-	for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
-		"${AMANDA_TMPDIR}" /etc/amanda; do
-		einfo "Securing directory (${i})"
-		fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
-	done
-	# Do NOT use -R
-	fperms 0700 \
-		"${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
-		"${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \
-		 "${AMANDA_USER_HOMEDIR}/amanda" \
-		 "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \
-		 /etc/amanda /etc/amanda/${AMANDA_CONFIG_NAME}
-
-	einfo "Setting setuid permissions"
-	amanda_permissions_fix "${D}"
-
-	# Relax permissions again
-	insopts -m0644
-
-	# docs
-	einfo "Installing documentation"
-	dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING
-	# our inetd sample
-	einfo "Installing standard inetd sample"
-	newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample
-	# Amanda example configs
-	einfo "Installing example configurations"
-	rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes}
-	mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/"
-	docinto example1
-	newdoc "${FILESDIR}/example_amanda.conf" amanda.conf
-	newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist
-	newdoc "${FILESDIR}/example_global.conf" global.conf
-
-	einfo "Cleaning up dud .la files"
-	perlinfo
-	find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f
-}
-
-pkg_postinst() {
-	[ ! -f "${TMPENVFILE}" -a "$EMERGE_FROM" == "binary" ] && \
-		TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}"
-	[ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
-	source "${TMPENVFILE}"
-
-	# Migration of amandates from /etc to $localstatedir/amanda
-	if [ -f "${ROOT}/etc/amandates" -a \
-		! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
-		einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
-		einfo "A backup is also placed at /etc/amandates.orig"
-		cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig"
-		mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/"
-		cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates"
-	fi
-	if [ -f "${ROOT}/etc/amandates" ]; then
-		einfo "If you have migrated safely, please delete /etc/amandates"
-	fi
-
-	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
-	# another host than HOSTNAME.
-	if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
-		elog "You are installing a client-only version of Amanda."
-		elog "You should set the variable \$AMANDA_SERVER to point at your"
-		elog "Amanda-tape-server, otherwise you will have to specify its name"
-		elog "when using amrecover on the client."
-		elog "For example: Use something like"
-		elog "AMANDA_SERVER=\"myserver\" emerge amanda"
-		elog
-	fi
-
-	einfo "Checking setuid permissions"
-	amanda_permissions_fix "${ROOT}"
-
-	elog "You should configure Amanda in /etc/amanda now."
-	elog
-	elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
-	elog "and restart xinetd afterwards!"
-	elog
-	elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample"
-	elog "as an example of how to configure your inetd."
-	elog
-	elog "NOTICE: If you need raw access to partitions you need to add the"
-	elog "amanda user to the 'disk' group."
-	elog
-	elog "NOTICE: If you have a tape changer, you need to add the amanda user"
-	elog "to the 'tape' group."
-	elog
-	elog "If you use localhost in your disklist your restores may break."
-	elog "You should replace it with the actual hostname!"
-	elog "Please also see the syntax changes to amandahosts."
-}
-
-# We have had reports of amanda file permissions getting screwed up.
-# Losing setuid, becoming too lax etc.
-# ONLY root and users in the amanda group should be able to run these binaries!
-amanda_permissions_fix() {
-	local root="$1"
-	[ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
-	local le="/usr/libexec/amanda"
-	for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
-		"${le}"/rundump "${le}"/runtar "${le}"/dumper \
-		"${le}"/planner ; do
-		chown root:${AMANDA_GROUP_NAME} "${root}"/${i}
-		chmod u=srwx,g=rx,o= "${root}"/${i}
-	done
-}
diff --git a/app-backup/amanda/amanda-3.2.0.ebuild b/app-backup/amanda/amanda-3.2.2.ebuild
index aa625e8e19c5..209c245bf332 100644
--- a/app-backup/amanda/amanda-3.2.0.ebuild
+++ b/app-backup/amanda/amanda-3.2.2.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2010 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-3.2.0.ebuild,v 1.1 2010/12/07 21:51:20 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-backup/amanda/amanda-3.2.2.ebuild,v 1.1 2011/03/17 20:52:36 idl0r Exp $
 
 EAPI=3
 inherit autotools eutils perl-module
@@ -22,9 +22,11 @@ RDEPEND="sys-libs/readline
 	>=dev-libs/glib-2.26.0
 	nls? ( virtual/libintl )
 	s3? ( >=net-misc/curl-7.10.0 )
+	!s3? ( curl? ( >=net-misc/curl-7.10.0 ) )
 	samba? ( net-fs/samba )
 	kerberos? ( app-crypt/mit-krb5 )
 	xfs? ( sys-fs/xfsdump )
+	readline? ( sys-libs/readline )
 	!minimal? (
 		virtual/mailx
 		app-arch/mt-st
@@ -41,7 +43,7 @@ DEPEND="${RDEPEND}
 	app-text/docbook-xml-dtd
 	"
 
-IUSE="gnuplot ipv6 kerberos minimal nls s3 samba xfs"
+IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba xfs"
 
 S="${WORKDIR}/${MY_P}"
 
@@ -112,6 +114,19 @@ amanda_variable_setup() {
 
 pkg_setup() {
 	amanda_variable_setup
+
+	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
+	# another host than HOSTNAME.
+	if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
+		elog "You are installing a client-only version of Amanda."
+		elog "You should set the variable \$AMANDA_SERVER to point at your"
+		elog "Amanda-tape-server, otherwise you will have to specify its name"
+		elog "when using amrecover on the client."
+		elog "For example: Use something like"
+		elog "AMANDA_SERVER=\"myserver\" emerge amanda"
+		elog
+	fi
+
 	enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
 	enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
 }
@@ -160,6 +175,11 @@ src_prepare() {
 		cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1
 		use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1
 	) > "${T}"/amandahosts
+
+	if ! use minimal; then
+		sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \
+			server-src/am{addclient,serverconfig}.pl || die
+	fi
 }
 
 src_configure() {
@@ -227,16 +247,17 @@ src_configure() {
 	myconf="${myconf} --with-bsdudp-security"
 	myconf="${myconf} --with-bsdtcp-security"
 
-	# kerberos-security mechanism version 4
-	# always disable, per bug #173354
-	myconf="${myconf} --without-krb4-security"
-
 	# kerberos-security mechanism version 5
 	myconf="${myconf} `use_with kerberos krb5-security`"
 
 	# Amazon S3 support
 	myconf="${myconf} `use_enable s3 s3-device`"
 
+	# libcurl is required for S3 but otherwise optional
+	if ! use s3; then
+		myconf="${myconf} $(use_with curl libcurl)"
+	fi
+
 	# Client only, as requested in bug #127725
 	if use minimal ; then
 		myconf="${myconf} --without-server"
@@ -262,7 +283,9 @@ src_configure() {
 	# build manpages
 	myconf="${myconf} --enable-manpage-build"
 
-	econf ${myconf} || die "econf failed!"
+	econf \
+		$(use_with readline) \
+		${myconf}
 }
 
 src_compile() {
@@ -304,9 +327,11 @@ src_install() {
 		newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda
 	fi
 
-	einfo "Installing Sample Daily Cron Job for Amanda"
-	insinto /etc/cron.daily
-	newins "${MYFILESDIR}/amanda-cron" amanda
+	if ! use minimal; then
+		einfo "Installing Sample Daily Cron Job for Amanda"
+		insinto /etc/cron.daily
+		newins "${MYFILESDIR}/amanda-cron" amanda
+	fi
 
 	insinto /etc/amanda
 	einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
@@ -392,18 +417,6 @@ pkg_postinst() {
 		einfo "If you have migrated safely, please delete /etc/amandates"
 	fi
 
-	# If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
-	# another host than HOSTNAME.
-	if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
-		elog "You are installing a client-only version of Amanda."
-		elog "You should set the variable \$AMANDA_SERVER to point at your"
-		elog "Amanda-tape-server, otherwise you will have to specify its name"
-		elog "when using amrecover on the client."
-		elog "For example: Use something like"
-		elog "AMANDA_SERVER=\"myserver\" emerge amanda"
-		elog
-	fi
-
 	einfo "Checking setuid permissions"
 	amanda_permissions_fix "${ROOT}"