whoops to that, this was azs version

1 files changed, 607 insertions, 0 deletions

diff --git a/app-office/openoffice/openoffice-1.0.1-r3.ebuild b/app-office/openoffice/openoffice-1.0.1-r3.ebuild
new file mode 100644
index 000000000000..f1cc03cd5795
--- /dev/null
+++ b/app-office/openoffice/openoffice-1.0.1-r3.ebuild
@@ -0,0 +1,607 @@
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-office/openoffice/openoffice-1.0.1-r3.ebuild,v 1.3 2002/12/12 20:46:31 sethbc Exp $
+
+# IMPORTANT:  This is extremely alpha!!!
+
+# Notes:
+#
+#   This will take a HELL of a long time to compile, be warned.
+#   According to openoffice.org, it takes approximately 12 hours on a
+#   P3/600 with 256mb ram.  And thats where building is its only task.
+#
+#   It takes about 6 hours on my P4 1.8 with 512mb memory, and the
+#   build only needs about 2.1GB of disk space - Azarah.
+#
+#   You will also need a bucketload of diskspace ... in the order of
+#   4-5 gb free to store all the compiled files and installation
+#   directories.
+#
+#   The information on how to build and what is required comes from:
+#   http://www.openoffice.org/dev_docs/source/build_linux.html
+#   http://tools.openoffice.org/ext_comp.html
+#
+# Todo:
+#
+#   Get support going for installing a custom language pack.  Also
+#   need to be able to install more than one language pack.
+
+inherit flag-o-matic eutils
+# Compile problems with these ...
+filter-flags "-funroll-loops"
+filter-flags "-fomit-frame-pointer"
+replace-flags "-O3" "-O2"
+# Needed to stop segfaults in tools
+append-flags "-fno-strict-aliasing"
+
+inherit gcc
+# We want gcc3 if possible!!!!
+export WANT_GCC_3="yes"
+
+inherit virtualx
+
+# Set $ECPUS to amount of processes multiprocessing build should use.
+# NOTE:  Setting this too high might cause dmake to segfault!!
+#        Setting this to anything but "1" on my pentium4 causes things
+#        to segfault :(
+[ -z "${ECPUS}" ] && export ECPUS="1"
+
+
+LOC="/opt"
+FT_VER="2.1.2"
+STLP_VER="4.5.3"
+
+INSTDIR="${LOC}/OpenOffice.org${PV}"
+S="${WORKDIR}/oo_${PV}_src"
+DESCRIPTION="OpenOffice.org, a full office productivity suite."
+SRC_URI="http://ny1.mirror.openoffice.org/${PV}/OOo_${PV}_source.tar.bz2
+	http://sf1.mirror.openoffice.org/${PV}/OOo_${PV}_source.tar.bz2
+	http://www.stlport.org/archive/STLport-${STLP_VER}.tar.gz
+	ftp://ftp.cs.man.ac.uk/pub/toby/gpc/gpc231.tar.Z
+	mirror://sourceforge/freetype/freetype-2.1.2.tar.gz"
+HOMEPAGE="http://www.openoffice.org/"
+
+LICENSE="LGPL-2 | SISSL-1.1"
+SLOT="0"
+KEYWORDS="~x86 ~ppc"
+IUSE="gnome kde"
+
+RDEPEND=">=sys-libs/glibc-2.1
+	>=sys-devel/perl-5.0
+	virtual/x11
+	app-arch/zip
+	app-arch/unzip
+	dev-libs/expat
+	>=virtual/jdk-1.3.1
+	ppc? ( >=sys-libs/glibc-2.2.5-r7
+	>=sys-devel/gcc-3.2 )" # needed for sqrtl patch recently introduced
+
+DEPEND="${RDEPEND}
+	app-shells/tcsh"
+
+# fix a bug with tcsh and dircolors
+#
+# Azarah -- 10 April 2002
+export LS_COLORS=""
+
+
+pkg_setup() {
+
+	if [ "$(gcc-version)" != "3.2" ]
+	then
+		eerror
+		eerror "This build needs gcc-3.2 or later, but due to profile"
+		eerror "settings, it cannot DEPEND on it, so please merge it"
+		eerror "manually:"
+		eerror
+		eerror " #  ebuild ${PORTDIR}/sys-devel/gcc/gcc-3.2.1.ebuild merge"
+		eerror
+		eerror "Please make sure that you use the latest availible revision of"
+		eerror "gcc-3.2.  Thus if there is already a gcc-3.2.1-r2 out, use this"
+		eerror "rather than 3.2.1, etc."
+		eerror
+		eerror "As of writing, gcc-3.2.1 seemed to create the most stable builds."
+		eerror "Also, because OO is such a complex build, ONLY gcc-3.2.1 will be"
+		eerror "supported!"
+		eerror
+		eerror "This process is not highly recomended, as upgrading your compiler"
+		eerror "without upgrading your distribution can be detrimental to your "
+		eerror "installation of gentoo, unless you know what you're getting into"
+		eerror
+		die
+	fi
+
+	if [ -z "$(echo ${JDK_HOME} | grep "blackdown")" ] && [ "${FORCE_JAVA}" != "yes" ]
+	then
+		eerror
+		eerror "This ebuild has only been tested with the blackdown port of"
+		eerror "java.  If you use another java implementation, it could fail"
+		eerror "horribly, so please merge the blackdown-jdk and set it as"
+		eerror "system VM before proceeding:"
+		eerror
+		eerror " # emerge blackdown-jdk"
+		eerror " # java-config --set-system-vm=blackdown-jdk-1.4.1_beta"
+		eerror " # env-update"
+		eerror " # source /etc/profile"
+		eerror
+		eerror "At the time of writing, this was version 1.4.1_beta, so please"
+		eerror "adjust the version according to the version installed in"
+		eerror "/opt."
+		eerror
+		eerror "If you however want to test another JDK (not officially supported),"
+		eerror "you could do the following:"
+		eerror
+		eerror " # export FORCE_JAVA=yes"
+		eerror
+		die
+	fi
+
+	ewarn "****************************************************************"
+	ewarn " To get this thing to build at all, I had to use less agressive"
+	ewarn " CFLAGS and CXXFLAGS.  If this build thus fails, and you edited"
+	ewarn " this ebuild at all, or used too agressive compiler flags ..."
+	ewarn
+	ewarn "   You HAVE been Warned!"
+	ewarn
+	ewarn "****************************************************************"
+}
+
+oo_setup() {
+
+	export NEW_GCC="0"
+
+	if [ -x /usr/sbin/gcc-config ]
+	then
+		# Do we have a gcc that use the new layout and gcc-config ?
+		if /usr/sbin/gcc-config --get-current-profile &> /dev/null
+		then
+			export NEW_GCC="1"
+
+			# Just recheck gcc version ...
+			if [ "$(gcc-version)" != "3.2" ]
+			then
+				eerror "This build needs gcc-3.2 or later!"
+				eerror
+				eerror "Use gcc-config to change your gcc profile:"
+				eerror
+				eerror "  # gcc-config $CHOST-3.2.1"
+				eerror
+				eerror "or whatever gcc version is relevant."
+				die
+			fi
+		fi
+	fi
+}
+
+src_unpack() {
+
+	oo_setup
+
+	cd ${WORKDIR}
+	unpack OOo_${PV}_source.tar.bz2 gpc231.tar.Z
+
+	# Install gpc
+	cd ${WORKDIR}/gpc231
+	cp gpc.* ${S}/external/gpc
+
+	cd ${S}
+
+	einfo "Applying patches..."
+	# This allows JDK 1.4.0 to be used (Prez)
+	epatch ${FILESDIR}/${PV}/${PN}-1.0.0-configure.patch
+
+	# Get OO to build with gcc-3.2's libstdc++.so (Az)
+	if [ "$(gcc-version)" = "3.2" ]
+	then
+		if [ "$(gcc-fullversion)" = "3.2" ]
+		then
+			epatch ${FILESDIR}/${PV}/${P}-use-libstdc++-5.0.0.patch
+			
+		elif [ "$(gcc-fullversion)" = "3.2.1" ]
+		then
+			epatch ${FILESDIR}/${PV}/${P}-use-libstdc++-5.0.1.patch
+		fi
+	fi
+
+	cd ${S}
+
+	# Debian patch to enable build of zipdep
+	epatch ${FILESDIR}/${PV}/${PN}-1.0.0-zipdep-not-found.patch
+
+	# Some Debian patches to get the build to use $CC and $CXX,
+	# thanks to nidd from #openoffice.org
+	epatch  ${FILESDIR}/${PV}/${P}-gcc-version-check.patch
+	epatch  ${FILESDIR}/${PV}/${P}-set-compiler-vars.patch
+	epatch ${FILESDIR}/${PV}/${P}-use-compiler-vars.patch
+	# Update configure before we do anything else.
+	cd ${S}/config_office; autoconf || die; cd ${S}
+
+	# This resolves missing symbols (Debian)
+	epatch ${FILESDIR}/${PV}/${P}-compiler-flags.patch
+
+	# Enable ccache and distcc (Debian)
+	epatch ${FILESDIR}/${PV}/${P}-parallel-build.patch
+	# If $HOME is not set, ccache breaks. (Debian)
+	epatch ${FILESDIR}/${PV}/${P}-dont-unset-home.patch
+
+	if [ "$(use ppc)" ]
+	then
+		# Not sure about this .. PPC guys will have to verify.
+		epatch ${FILESDIR}/${PV}/${P}-bridge-fix-on-PPC.patch
+	fi
+
+	# Misc Debian patches to fixup build
+	epatch ${FILESDIR}/${PV}/${PN}-1.0.1-no-mozab.patch
+	echo "moz     moz : NULL" > ${S}/moz/prj/build.lst
+
+	# Misc patches from Mandrake
+	epatch ${FILESDIR}/${PV}/${P}-braindamage.patch
+	epatch ${FILESDIR}/${PV}/${P}-fix-asm.patch
+
+	# Get OO to use STLport-4.5.3 (Az)
+	cp ${DISTDIR}/STLport-${STLP_VER}.tar.gz ${S}/stlport/download || die
+	cd ${S}/stlport
+	# New gcc layout use /usr/include/g++-v3/, and not /usr/include/g++-v32 ...
+	if [ "${NEW_GCC}" -eq "1" ]
+	then
+		epatch ${FILESDIR}/${PV}/${P}-use-STLport-4.5.3-newgcc.patch
+	else
+		epatch ${FILESDIR}/${PV}/${P}-use-STLport-4.5.3.patch
+	fi
+
+	# Get OO to build with freetype-2.1.2
+	cd ${S}
+	cp ${DISTDIR}/freetype-${FT_VER}.tar.gz ${S}/freetype/download || die
+	cp ${FILESDIR}/${PV}/freetype-${FT_VER}.patch ${S}/freetype || die
+	epatch ${FILESDIR}/${PV}/${P}-use-freetype-${FT_VER}.patch
+
+	# More gcc3 related fixes
+	if [ "$(gcc-major-version)" -eq 3 ] && [ "$(gcc-minor-version)" -ne 0 ]
+	then
+		local incver="$(gcc-version)"
+		local minver="$(gcc-minor-version)"
+	
+		# Fix ./configure for gcc3 (Az)
+		perl -pi -e 's|CC --version|CC -dumpversion|g' \
+			${S}/config_office/configure
+#		perl -pi -e "s|_gccincname1=\"g++-v3\"|_gccincname1=\"g++-v${incver/\.}\"|g" \
+#			${S}/config_office/configure
+
+		# Fix header not supporting 3.2 and up (Az)
+		perl -pi -e "s|__GNUC_MINOR__ == 0|__GNUC_MINOR__ == ${minver}|g" \
+			${S}/cppu/inc/uno/lbnames.h
+	fi
+
+	# Now for our optimization flags ...
+	perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
+		${S}/solenv/inc/unxlngi3.mk
+	perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
+		${S}/solenv/inc/unxlngi4.mk
+
+	# Some makefiles are not multiprocess ready (Mandrake)
+	cd ${S}; einfo "Fixing makefiles for multiprocess builds..."
+	for x in io/source/stm dtrans/source/X11 idlc/source nas zlib toolkit/util \
+		comphelper/util padmin/source svtools/util bridges/source/prot_uno \
+		ucb/source/ucp/ftpproxy framework/util framework/source/unotypes
+	do
+		perl -pi -e "s/^(PRJNAME)/MAXPROCESS=1\n\1/" ${x}/makefile.mk
+	done
+
+	# Seth -- Dec 1 2002
+	if [ "$(echo ${JDK_HOME} | grep "jdk-1.4")" ]
+	then 
+	        epatch ${FILESDIR}/${PV}/${P}-fix-jdk-1.4.0.patch
+	fi
+
+}
+
+get_EnvSet() {
+
+	# Determine what Env file we should be using (Az)
+	export LinuxEnvSet="LinuxIntelEnv.Set"
+	use sparc && export LinuxEnvSet="LinuxSparcEnv.Set"
+	use sparc64 && export LinuxEnvSet="LinuxSparcEnv.Set"
+	use ppc && export LinuxEnvSet="LinuxPPCEnv.Set"
+	use alpha && export LinuxEnvSet="LinuxAlphaEnv.Set"
+
+	# Get build specific stuff (Az)
+	export SOLVER="$(awk '/^setenv UPD / {print $3}' ${LinuxEnvSet})"
+	export SOLPATH="$(awk '/^setenv INPATH / {print $3}' ${LinuxEnvSet})"
+}
+
+src_compile() {
+
+	oo_setup
+
+	local buildcmd=""
+
+	# Setup default compilers (We overide gcc2 if that is default here)
+	export CC="$(gcc-getCC)"
+	export CXX="$(gcc-getCXX)"
+
+	# Create aliases to normal gcc binary names to make sure we compile
+	# everything with the same version of gcc, and avoid possible
+	# segfaults.  This is only done if gcc binaries with non standard
+	# names are used. (Az)
+	[ "${CC}" != "gcc" ] && ln -s $(which ${CC}) ${S}/solenv/bin/gcc
+	[ "${CXX}" != "gcc" -a "${CXX}" != "g++" ] && {\
+		ln -s $(which ${CXX}) ${S}/solenv/bin/g++
+		ln -s $(which ${CXX}) ${S}/solenv/bin/c++
+		ln -s $(which ${CXX}) ${S}/solenv/bin/cpp
+	}
+
+	# Enable distcc for this build (Az)
+	if [ "${FEATURES/-distcc/}" = "${FEATURES}" -a \
+	     "${FEATURES/distcc/}" != "${FEATURES}" -a \
+		 -x /usr/bin/distcc ]
+	then
+		# Do not bump ECPUS if the user did not touch it, as currently
+		# it -PP do not work properly (segfaulting). (Az)
+		[ "$(echo ${DISTCC_HOSTS} | wc -w)" -gt 1 -a "${ECPUS}" -qt 1 ] && \
+			export ECPUS="$(echo ${DISTCC_HOSTS} | wc -w)"
+
+		export CC="distcc ${CC}"
+		export CXX="distcc ${CXX}"
+	fi
+
+	# Enable ccache for this build (Az)
+	if [ "${FEATURES/-ccache/}" = "${FEATURES}" -a \
+	     "${FEATURES/ccache/}" != "${FEATURES}" -a \
+		 -d /usr/bin/ccache -a -x /usr/bin/ccache/ccache ]
+	then
+		# Build uses its own env with $PATH, etc, so
+		# we take the easy way out. (Az)
+		export CC="/usr/bin/ccache/ccache ${CC}"
+		export CXX="/usr/bin/ccache/ccache ${CXX}"
+	fi
+	
+	# Do NOT compile with a external STLport, as gcc-2.95.3 users will
+	# get linker errors due to the ABI being different (STLport will be
+	# compiled with 2.95.3, while OO is compiled with 3.x). (Az)
+	einfo "Configuring OpenOffice.org..."
+	cd ${S}/config_office
+	rm -f config.cache
+	./configure --enable-gcc3 \
+		--with-jdk-home=${JAVA_HOME} \
+		--with-lang=ENUS \
+		--with-x || die
+	
+	cd ${S}
+	get_EnvSet
+	
+	# Workaround for missing libs with GCC3 (thanks to Debian) (Az)
+	if [ "$(gcc-major-version)" -eq 3 ]
+	then
+		einfo "Installing GCC related libs..."
+
+		mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/lib
+
+		cd ${S}/solver/${SOLVER}/${SOLPATH}/lib
+		cp $(gcc-libpath)/libstdc++.so.$(gcc-libstdcxx-major-version)* . || \
+			die "Could not copy gcc-libs!"
+		cp $(gcc-libpath)/libgcc_s.so* . || die "Could not copy gcc-libs!"
+		cd ${S}
+	fi
+
+	# Do not include /usr/include in header search path, and
+	# same thing for internal gcc include dir, as gcc3 handles
+	# it correctly by default! (Az)
+	perl -pi -e "s| -I/usr/include||g" ${LinuxEnvSet}
+#	perl -pi -e "s| -I$(gcc-libpath)/include||g" ${LinuxEnvSet}
+
+	if [ "${NEW_GCC}" -eq "1" ]
+	then
+		local gcc_path="$(/usr/sbin/gcc-config --get-bin-path)"
+
+		# Setup path for new gcc layout in $LinuxEnvSet, else the build
+		# environment will not find gcc ... (Az)
+		perl -pi -e "s|PATH \.:\$SOLARVER|PATH \.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
+	fi
+
+	# Should the build use multiprocessing?
+	# We use build.pl directly, as dmake tends to segfault. (Az)
+	if [ "${ECPUS}" -gt 1 ]
+	then
+		buildcmd="${S}/solenv/bin/build.pl -all -PP${ECPUS} product=full"
+	else
+		buildcmd="${S}/solenv/bin/build.pl -all product=full"
+	fi
+		
+	einfo "Bootstrapping OpenOffice.org..."
+	# Get things ready for bootstrap (Az)
+	chmod 0755 ${S}/solenv/bin/*.pl
+	mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/inc
+	touch ${S}/solver/${SOLVER}/${SOLPATH}/inc/minormkchanged.flg
+	# Bootstrap ...
+	./bootstrap
+	
+	einfo "Building OpenOffice.org..."
+	# Setup virtualmake
+	export maketype="tcsh"
+	echo "source ${S}/${LinuxEnvSet} && cd ${S}/instsetoo && ${buildcmd}" > build.tcsh
+	# Build needs X to compile! (Az)
+	virtualmake build.tcsh || die "Build failed!"
+
+	[ -d ${S}/instsetoo/${SOLPATH} ] || die "Cannot find build directory!"
+}
+
+src_install() {
+
+	# This allows us to change languages without editing the ebuild.
+	#
+	#   languages1="ENUS,FREN,GERM,SPAN,ITAL,DTCH,PORT,SWED,POL,RUSS"
+	#   languages2="DAN,GREEK,TURK,CHINSIM,CHINTRAD,JAPN,KOREAN,CZECH,CAT"
+	#
+	# Supported languages for localized help files
+	#
+	#   helplangs="ENUS,FREN,GERM,SPAN,ITAL,SWED"
+	#
+	[ -z "${LANGUAGE}" ] && LANGUAGE=01
+
+	get_EnvSet
+	
+	# The install part should now be relatively OK compared to
+	# what it was.  Basically we use autoresponse files to install
+	# unattended, running under a Xvfb if needed.  Afterwards we
+	# just cleanout ${D} from the registry, etc.  This way we
+	# do not need pre-generated registry, and also fixes some weird
+	# bugs related to the old way we did things.
+	#
+	# <azarah@gentoo.org> (9 Sep 2002)
+
+	# Autoresponse file for main installation
+	cat > ${T}/rsfile-global <<-"END_RS"
+		[ENVIRONMENT]
+		INSTALLATIONMODE=INSTALL_NETWORK
+		INSTALLATIONTYPE=STANDARD
+		DESTINATIONPATH=<destdir>
+		OUTERPATH=
+		LOGFILE=
+		LANGUAGELIST=<LANGUAGE>
+
+		[JAVA]
+		JavaSupport=preinstalled_or_none
+	END_RS
+	
+	# Autoresponse file for user isntallation
+	cat > ${T}/rsfile-local <<-"END_RS"
+		[ENVIRONMENT]
+		INSTALLATIONMODE=INSTALL_WORKSTATION
+		INSTALLATIONTYPE=WORKSTATION
+		DESTINATIONPATH=<home>/.openoffice/<pv>
+
+		[JAVA]
+		JavaSupport=none
+	END_RS
+
+	# Fixing install location in response file
+	sed -e "s|<destdir>|${D}${INSTDIR}|" \
+		${T}/rsfile-global > ${T}/autoresponse
+
+	einfo "Installing OpenOffice.org into build root..."
+	dodir ${INSTDIR}
+	cd ${S}/instsetoo/${SOLPATH}/${LANGUAGE}/normal
+	# Setup virtualmake
+	export maketype="./setup"
+	# We need X to install...
+	virtualmake "-v -r:${T}/autoresponse"
+
+	echo
+	einfo "Removing build root from registy..."
+	# Remove totally useless stuff.
+	rm -f ${D}${INSTDIR}/program/{setup.log,sopatchlevel.sh}
+	# Remove build root from registry and co
+	egrep -rl "${D}" ${D}${INSTDIR}/* | \
+		xargs -i perl -pi -e "s|${D}||g" {} || :
+
+	einfo "Fixing permissions..."
+	# Fix permissions
+	find ${D}${INSTDIR}/ -type f -exec chmod a+r {} \;
+	chmod a+x ${D}${INSTDIR}/share/config/webcast/*.pl
+
+	# Fix symlinks
+	for x in "soffice program/spadmin" \
+		"program/setup setup" \
+		"program/spadmin spadmin"
+	do
+		dosym $(echo ${x} | awk '{print $1}') \
+			${INSTDIR}/$(echo ${x} | awk '{print $2}')
+	done
+
+	# Install user autoresponse file
+	insinto /etc/openoffice
+	sed -e "s|<pv>|${PV}|g" ${T}/rsfile-local > ${T}/autoresponse.conf
+	doins ${T}/autoresponse.conf
+	
+	# Install wrapper script
+	exeinto /usr/bin
+	sed -e "s|<pv>|${PV}|g" \
+		${FILESDIR}/${PV}/ooffice-wrapper-1.1 > ${T}/ooffice
+	doexe ${T}/ooffice
+	# Component symlinks
+	dosym ooffice /usr/bin/oocalc
+	dosym ooffice /usr/bin/oodraw
+	dosym ooffice /usr/bin/ooimpress
+	dosym ooffice /usr/bin/oomath
+	dosym ooffice /usr/bin/oowriter
+	dosym ooffice /usr/bin/oosetup
+	dosym ooffice /usr/bin/oopadmin
+
+	einfo "Installing Menu shortcuts (need \"gnome\" or \"kde\" in USE)..."
+	if [ -n "`use gnome`" ]
+	then
+		insinto /usr/share/gnome/apps/OpenOffice.org
+		# Install the files needed for the catagory
+		doins ${D}${INSTDIR}/share/gnome/net/.directory
+		doins ${D}${INSTDIR}/share/gnome/net/.order
+		
+		for x in ${D}${INSTDIR}/share/gnome/net/*.desktop
+		do
+			# We have to handle setup differently
+			perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
+			# Now fix the rest
+			perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
+			doins ${x}
+		done
+	fi
+
+	if [ -n "`use kde`" ]
+	then
+		local kdeloc="${D}${INSTDIR}/share/kde/net/applnk/OpenOffice.org${PV}"
+	
+		# Portage do not work with the space ..
+		mv ${D}${INSTDIR}/share/kde/net/applnk/OpenOffice.org\ ${PV} ${kdeloc}
+		
+		insinto /usr/share/applnk/OpenOffice.org
+		# Install the files needed for the catagory
+		doins ${kdeloc}/.directory
+		doins ${kdeloc}/.order
+		dodir /usr/share
+		# Install the icons and mime info
+		cp -a ${D}${INSTDIR}/share/kde/net/mimelnk/share/* ${D}/usr/share
+		
+		for x in ${kdeloc}/*.desktop
+		do
+			# We have to handle setup differently
+			perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
+			# Now fix the rest
+			perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
+			doins ${x}
+		done
+	fi
+
+	# Unneeded, as they get installed into /usr/share...
+	rm -rf ${D}${INSTDIR}/share/{cde,gnome,kde}
+
+	# Make sure these do not get nuked.
+	keepdir ${INSTDIR}/user/config/registry/instance/org/openoffice/{Office,ucb}
+	keepdir ${INSTDIR}/user/psprint/{driver,fontmetric}
+	keepdir ${INSTDIR}/user/{autocorr,backup,plugin,store,temp,template}
+}
+
+pkg_preinst() {
+
+	# The one with OO-1.0.0 was not valid
+	if [ -f ${ROOT}/etc/openoffice/autoresponse.conf ]
+	then
+		rm -f ${ROOT}/etc/openoffice/autoresponse.conf
+	fi
+}
+
+pkg_postinst() {
+
+	einfo "******************************************************************"
+	einfo " To start OpenOffice.org, run:"
+	einfo
+	einfo "   $ ooffice"
+	einfo
+	einfo " Also, for individual components, you can use any of:"
+	einfo
+	einfo "   oocalc, oodraw, ooimpress, oomath or oowriter"
+	einfo
+	einfo " If the fonts appear garbled in the user interface refer to "
+	einfo " Bug 8539, or http://www.openoffice.org/FAQs/fontguide.html#8"
+	einfo 
+	einfo "******************************************************************"
+}   
+