Moving to mail-mta/exim

33 files changed, 0 insertions, 1466 deletions

diff --git a/net-mail/exim/files/auth_conf.sub b/net-mail/exim/files/auth_conf.sub
deleted file mode 100644
index fb744a5a67a1..000000000000
--- a/net-mail/exim/files/auth_conf.sub
+++ /dev/null
@@ -1,25 +0,0 @@
-######################################################################
-#                   AUTHENTICATION CONFIGURATION                     #
-######################################################################
-# If you're using PAM to authenticate, lifes real simple.
-# This plain directive works for nearly everything except windows MUA's the
-# login directive will allow you to authenticate your Outlook 2000 and
-# outlook express clients.
-
-
-
-plain:
-  driver = plaintext
-  public_name = PLAIN
-  server_condition = "${if pam{$2:$3}{1}{0}}"
-  server_set_id = $2
-
-login:
-  driver = plaintext
-  public_name = LOGIN
-  server_prompts = "Username:: : Password::"
-  server_condition = "${if pam{$1:$2}{1}{0}}"
-  server_set_id = $1
-
-# FIXME
-# Need to add authenticator for SPA!!
diff --git a/net-mail/exim/files/configure b/net-mail/exim/files/configure
deleted file mode 100644
index 740da7fc501a..000000000000
--- a/net-mail/exim/files/configure
+++ /dev/null
@@ -1,419 +0,0 @@
-######################################################################
-#                  Runtime configuration file for Exim               #
-######################################################################
-
-
-# This is a default configuration file which will operate correctly in
-# uncomplicated installations. Please see the manual for a complete list
-# of all the runtime configuration options that can be included in a
-# configuration file. There are many more than are mentioned here. The
-# manual is in the file doc/spec.txt in the Exim distribution as a plain
-# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
-# from the Exim ftp sites. The manual is also online via the Exim web sites.
-
-
-# This file is divided into several parts, all but the last of which are
-# terminated by a line containing the word "end". The parts must appear
-# in the correct order, and all must be present (even if some of them are
-# in fact empty). Blank lines, and lines starting with # are ignored.
-
-
-############ IMPORTANT ########## IMPORTANT ########### IMPORTANT ############
-#                                                                            #
-# Whenever you change Exim's configuration file, you *must* remember to HUP  #
-# the Exim daemon, because it will not pick up the new configuration until   #
-# until you do this. It is usually a good idea to test a new configuration   #
-# for syntactic correctness (e.g. using "exim -C /config/file -bV") first.   #
-#                                                                            #
-############ IMPORTANT ########## IMPORTANT ########### IMPORTANT ############
-
-
-
-######################################################################
-#                    MAIN CONFIGURATION SETTINGS                     #
-######################################################################
-
-# Specify your host's canonical name here. This should normally be the fully
-# qualified "official" name of your host. If this option is not set, the
-# uname() function is called to obtain the name.
-
-# primary_hostname =
-
-
-# Specify the domain you want to be added to all unqualified addresses
-# here. An unqualified address is one that does not contain an "@" character
-# followed by a domain. For example, "caesar@rome.ex" is a fully qualified
-# address, but the string "caesar" (i.e. just a login name) is an unqualified
-# email address. Unqualified addresses are accepted only from local callers by
-# default. See the receiver_unqualified_{hosts,nets} options if you want
-# to permit unqualified addresses from remote sources. If this option is
-# not set, the primary_hostname value is used for qualification.
-
-# qualify_domain =
-
-
-# If you want unqualified recipient addresses to be qualified with a different
-# domain to unqualified sender addresses, specify the recipient domain here.
-# If this option is not set, the qualify_domain value is used.
-
-# qualify_recipient =
-
-
-# Specify your local domains as a colon-separated list here. If this option
-# is not set (i.e. not mentioned in the configuration file), the
-# qualify_recipient value is used as the only local domain. If you do not want
-# to do any local deliveries, uncomment the following line, but do not supply
-# any data for it. This sets local_domains to an empty string, which is not
-# the same as not mentioning it at all. An empty string specifies that there
-# are no local domains; not setting it at all causes the default value (the
-# setting of qualify_recipient) to be used.
-
-# local_domains =
-
-
-# If you want to accept mail addressed to your host's literal IP address, for
-# example, mail addressed to "user@[111.111.111.111]", then uncomment the
-# following line, or supply the literal domain(s) as part of "local_domains"
-# above. You also need to comment "forbid_domain_literals" below. This is not
-# recommended for today's Internet.
-
-# local_domains_include_host_literals
-
-
-# The following line prevents Exim from recognizing addresses of the form
-# "user@[111.111.111.111]" that is, with a "domain literal" (an IP address)
-# instead of a named domain. The RFCs still require this form, but it makes
-# little sense to permit mail to be sent to specific hosts by their IP address
-# in the modern Internet, and this ancient format has been used by those
-# seeking to abuse hosts by using them for unwanted relaying. If you really
-# do want to support domain literals, remove the following line, and see
-# also the "domain_literal" router below.
-
-forbid_domain_literals
-
-
-# No local deliveries will ever be run under the uids of these users (a colon-
-# separated list). An attempt to do so gets changed so that it runs under the
-# uid of "nobody" instead. This is a paranoic safety catch. Note the default
-# setting means you cannot deliver mail addressed to root as if it were a
-# normal user. This isn't usually a problem, as most sites have an alias for
-# root that redirects such mail to a human administrator.
-
-never_users = root
-
-
-# The use of your host as a mail relay by any host, including the local host
-# calling its own SMTP port, is locked out by default. If you want to permit
-# relaying from the local host, you should set
-#
-# host_accept_relay = localhost
-#
-# If you want to permit relaying through your host from certain hosts or IP
-# networks, you need to set the option appropriately, for example
-#
-# host_accept_relay = my.friends.host : 192.168.0.0/16
-#
-# If you are an MX backup or gateway of some kind for some domains, you must
-# set relay_domains to match those domains. This will allow any host to
-# relay through your host to those domains.
-#
-# relay_domains =
-#
-# See the section of the manual entitled "Control of relaying" for more
-# information.
-
-
-# The setting below causes Exim to do a reverse DNS lookup on all incoming
-# IP calls, in order to get the true host name. If you feel this is too
-# expensive, you can specify the networks for which a lookup is done, or
-# remove the setting entirely.
-
-host_lookup = *
-
-
-# By default, Exim expects all envelope addresses to be fully qualified, that
-# is, they must contain both a local part and a domain. If you want to accept
-# unqualified addresses (just a local part) from certain hosts, you can specify
-# these hosts by setting one or both of
-#
-# receiver_unqualified_hosts =
-# sender_unqualified_hosts =
-#
-# to control sender and receiver addresses, respectively. When this is done,
-# unqualified addresses are qualified using the settings of qualify_domain
-# and/or qualify_recipient (see above).
-
-
-# By default, Exim does not make any checks, other than syntactic ones, on
-# incoming addresses during the SMTP dialogue. This reduces delays in SMTP
-# transactions, but it does mean that you might accept messages with unknown
-# recipients, and/or bad senders.
-
-# Uncomment this line if you want incoming recipient addresses to be verified
-# during the SMTP dialogue. Unknown recipients are then rejected at this stage,
-# and the generation of a failure message is the job of the sending host.
-
-# receiver_verify
-
-# Uncomment this line if you want incoming sender addresses (return-paths) to
-# be verified during the SMTP dialogue. Verification can normally only check
-# that the domain exists.
-
-# sender_verify
-
-
-# Exim contains support for the Realtime Blocking List (RBL) that is being
-# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background.
-# Uncommenting the first line below will make Exim reject mail from any
-# host whose IP address is blacklisted in the RBL at maps.vix.com. Some
-# others have followed the RBL lead and have produced other lists: DUL is
-# a list of dial-up addresses, and ORBS is a list of open relay systems. The
-# second line below checks all three lists.
-
-# rbl_domains = rbl.maps.vix.com
-# rbl_domains = rbl.maps.vix.com:dul.maps.vix.com:relays.orbs.org
-
-
-# If you want Exim to support the "percent hack" for all your local domains,
-# uncomment the following line. This is the feature by which mail addressed
-# to x%y@z (where z is one of your local domains) is locally rerouted to
-# x@y and sent on. Otherwise x%y is treated as an ordinary local part.
-
-# percent_hack_domains = *
-
-
-# When Exim can neither deliver a message nor return it to sender, it "freezes"
-# the delivery error message (aka "bounce message"). There are also other
-# circumstances in which messages get frozen. They will stay on the queue for
-# ever unless one of the following options is set.
-
-# This option unfreezes unfreezes bounce messages after two days, tries
-# once more to deliver them, and ignores any delivery failures.
-
-ignore_errmsg_errors_after = 2d
-
-# This option cancels (removes) frozen messages that are older than a week.
-
-timeout_frozen_after = 7d
-
-end
-
-
-
-######################################################################
-#                      TRANSPORTS CONFIGURATION                      #
-######################################################################
-#                       ORDER DOES NOT MATTER                        #
-#     Only one appropriate transport is called for each delivery.    #
-######################################################################
-
-# A transport is used only when referenced from a director or a router that
-# successfully handles an address.
-
-
-# This transport is used for delivering messages over SMTP connections.
-
-remote_smtp:
-  driver = smtp
-
-
-# This transport is used for local delivery to user mailboxes in traditional
-# BSD mailbox format. By default it will be run under the uid and gid of the
-# local user, and requires the sticky bit to be set on the /var/mail directory.
-# Some systems use the alternative approach of running mail deliveries under a
-# particular group instead of using the sticky bit. The commented options below
-# show how this can be done.
-
-local_delivery:
-  driver = appendfile
-#  file = /var/mail/$local_part
-  directory = $home/.maildir
-  maildir_format
-  delivery_date_add
-  envelope_to_add
-  return_path_add
-# group = mail
-# mode = 0660
-
-
-# This transport is used for handling pipe deliveries generated by alias
-# or .forward files. If the pipe generates any standard output, it is returned
-# to the sender of the message as a delivery error. Set return_fail_output
-# instead of return_output if you want this to happen only when the pipe fails
-# to complete normally. You can set different transports for aliases and
-# forwards if you want to - see the references to address_pipe in the directors
-# section below.
-
-address_pipe:
-  driver = pipe
-  return_output
-
-
-# This transport is used for handling deliveries directly to files that are
-# generated by aliasing or forwarding.
-
-address_file:
-  driver = appendfile
-  delivery_date_add
-  envelope_to_add
-  return_path_add
-
-
-# This transport is used for handling autoreplies generated by the filtering
-# option of the forwardfile director.
-
-address_reply:
-  driver = autoreply
-
-
-end
-
-
-
-######################################################################
-#                      DIRECTORS CONFIGURATION                       #
-#             Specifies how local addresses are handled              #
-######################################################################
-#                          ORDER DOES MATTER                         #
-#   A local address is passed to each in turn until it is accepted.  #
-######################################################################
-
-# Local addresses are those with a domain that matches some item in the
-# "local_domains" setting above, or those which are passed back from the
-# routers because of a "self=local" setting (not used in this configuration).
-
-
-# This director handles aliasing using a traditional /etc/aliases file.
-# If any of your aliases expand to pipes or files, you will need to set
-# up a user and a group for these deliveries to run under. You can do
-# this by uncommenting the "user" option below (changing the user name
-# as appropriate) and adding a "group" option if necessary. Alternatively, you
-# can specify "user" on the transports that are used. Note that those
-# listed below are the same as are used for .forward files; you might want
-# to set up different ones for pipe and file deliveries from aliases.
-
-system_aliases:
-  driver = aliasfile
-  file = /etc/mail/aliases
-  search_type = lsearch
-# user = exim
-  file_transport = address_file
-  pipe_transport = address_pipe
-
-
-# This director handles forwarding using traditional .forward files.
-# If you want it also to allow mail filtering when a forward file
-# starts with the string "# Exim filter", uncomment the "filter" option.
-
-# The no_verify setting means that this director will be skipped when
-# verifying addresses if sender_verify or receiver_verify is set (though
-# they are not set by default). Similarly, no_expn means that this director
-# will be skipped if smtp_expn_hosts is set to allow any hosts to use the
-# EXPN command.
-
-# The check_ancestor option means that if the forward file generates an
-# address that is an ancestor of the current one, the current one gets
-# passed on instead. This covers the case where A is aliased to B and B
-# has a .forward file pointing to A.
-
-# The three transports specified at the end are those that are used when
-# forwarding generates a direct delivery to a file, or to a pipe, or sets
-# up an auto-reply, respectively.
-
-userforward:
-  driver = forwardfile
-  file = .forward
-  no_verify
-  no_expn
-  check_ancestor
-# filter
-  file_transport = address_file
-  pipe_transport = address_pipe
-  reply_transport = address_reply
-
-
-# This director matches local user mailboxes.
-
-localuser:
-  driver = localuser
-  transport = local_delivery
-
-
-end
-
-
-
-######################################################################
-#                      ROUTERS CONFIGURATION                         #
-#            Specifies how remote addresses are handled              #
-######################################################################
-#                          ORDER DOES MATTER                         #
-#  A remote address is passed to each in turn until it is accepted.  #
-######################################################################
-
-# Remote addresses are those with a domain that does not match any item
-# in the "local_domains" setting above.
-
-
-# This router routes to remote hosts over SMTP using a DNS lookup with
-# default options.
-
-lookuphost:
-  driver = lookuphost
-  transport = remote_smtp
-
-
-# This router routes to remote hosts over SMTP by explicit IP address,
-# when an email address is given in "domain literal" form, for example,
-# <user@[192.168.35.64]>. The RFCs require this facility. However, it is
-# little-known these days, and has been exploited by evil people seeking
-# to abuse SMTP relays. Consequently it is commented out in the default
-# configuration. If you uncomment this router, you also need to comment out
-# "forbid_domain_literals" above, so that Exim can recognize the syntax of
-# domain literal addresses.
-
-# domain_literal:
-#   driver = ipliteral
-#   transport = remote_smtp
-
-
-end
-
-
-
-######################################################################
-#                      RETRY CONFIGURATION                           #
-######################################################################
-
-# This single retry rule applies to all domains and all errors. It specifies
-# retries every 15 minutes for 2 hours, then increasing retry intervals,
-# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
-# hours, then retries every 8 hours until 4 days have passed since the first
-# failed delivery.
-
-# Domain               Error       Retries
-# ------               -----       -------
-
-*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,8h
-
-end
-
-
-
-######################################################################
-#                      REWRITE CONFIGURATION                         #
-######################################################################
-
-# There are no rewriting specifications in this default configuration file.
-
-end
-
-
-
-######################################################################
-#                   AUTHENTICATION CONFIGURATION                     #
-######################################################################
-
-# There are no authenticator specifications in this default configuration file.
-
-# End of Exim configuration file
diff --git a/net-mail/exim/files/digest-exim-4.10 b/net-mail/exim/files/digest-exim-4.10
deleted file mode 100644
index bde1295f7441..000000000000
--- a/net-mail/exim/files/digest-exim-4.10
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 3248805102546701a83ddceb032303af exim-4.10.tar.gz 1333428
-MD5 a11a02044421705b7b5fee6742eca5c2 exiscan-4.10-16.tar.gz 94556
diff --git a/net-mail/exim/files/digest-exim-4.12 b/net-mail/exim/files/digest-exim-4.12
deleted file mode 100644
index b684cd6591ae..000000000000
--- a/net-mail/exim/files/digest-exim-4.12
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 a69c8ebeec91559dea8fc4364ecb89a2 exim-4.12.tar.gz 1444383
-MD5 7ed67d3e10caf99174c693ff2016cf9c exiscan-4.12-21.tar.gz 100775
diff --git a/net-mail/exim/files/digest-exim-4.14 b/net-mail/exim/files/digest-exim-4.14
deleted file mode 100644
index bca81a3e6537..000000000000
--- a/net-mail/exim/files/digest-exim-4.14
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 bebd65023b117e2fa7dcea46f1129556 exim-4.14.tar.gz 1504354
-MD5 3bd9b18f55c079bcd9af2eb07fec469b exiscan-4.14-26.tar.gz 63656
diff --git a/net-mail/exim/files/digest-exim-4.20 b/net-mail/exim/files/digest-exim-4.20
deleted file mode 100644
index 1bf1437b725c..000000000000
--- a/net-mail/exim/files/digest-exim-4.20
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 a1f06f1de1ab602a25d78ad2a20819f2 exim-4.20.tar.gz 1549612
-MD5 a18eb772895af7b190d17c5b151d4dd9 exiscan-4.20-26.tar.gz 63663
-MD5 5898fa2e00e85c771cffe741f3198c07 exiscan-acl-4.20-09.patch 263216
diff --git a/net-mail/exim/files/digest-exim-4.20-r1 b/net-mail/exim/files/digest-exim-4.20-r1
deleted file mode 100644
index 1bf1437b725c..000000000000
--- a/net-mail/exim/files/digest-exim-4.20-r1
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 a1f06f1de1ab602a25d78ad2a20819f2 exim-4.20.tar.gz 1549612
-MD5 a18eb772895af7b190d17c5b151d4dd9 exiscan-4.20-26.tar.gz 63663
-MD5 5898fa2e00e85c771cffe741f3198c07 exiscan-acl-4.20-09.patch 263216
diff --git a/net-mail/exim/files/digest-exim-4.20-r2 b/net-mail/exim/files/digest-exim-4.20-r2
deleted file mode 100644
index 368f6db1d642..000000000000
--- a/net-mail/exim/files/digest-exim-4.20-r2
+++ /dev/null
@@ -1 +0,0 @@
-MD5 a1f06f1de1ab602a25d78ad2a20819f2 exim-4.20.tar.gz 1549612
diff --git a/net-mail/exim/files/digest-exim-4.21 b/net-mail/exim/files/digest-exim-4.21
deleted file mode 100644
index 58c8ead0f650..000000000000
--- a/net-mail/exim/files/digest-exim-4.21
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 eed92d34e02a5de1493d766fc92b0c94 exim-4.21.tar.gz 1625897
-MD5 c9571d38c50a41adad84bfb21669c2f9 exiscan-acl-4.21-10.patch 286429
diff --git a/net-mail/exim/files/digest-exim-4.22 b/net-mail/exim/files/digest-exim-4.22
deleted file mode 100644
index 7e970affc9da..000000000000
--- a/net-mail/exim/files/digest-exim-4.22
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 20df3d13b1d3cd2cd95312f2293e0b40 exim-4.22.tar.gz 1607027
-MD5 68f1643ac7de3b4c818916e714de8159 exiscan-acl-4.22-10.patch 286429
diff --git a/net-mail/exim/files/digest-exim-4.24 b/net-mail/exim/files/digest-exim-4.24
deleted file mode 100644
index 72ea7eafa2c7..000000000000
--- a/net-mail/exim/files/digest-exim-4.24
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 74f4116be9b71991b54b91abd7c99eec exim-4.24.tar.gz 1625449
-MD5 c8eb375adc7a7233d754eec20f07997f exiscan-acl-4.24-13.patch 290551
diff --git a/net-mail/exim/files/digest-exim-4.24-r1 b/net-mail/exim/files/digest-exim-4.24-r1
deleted file mode 100644
index 72ea7eafa2c7..000000000000
--- a/net-mail/exim/files/digest-exim-4.24-r1
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 74f4116be9b71991b54b91abd7c99eec exim-4.24.tar.gz 1625449
-MD5 c8eb375adc7a7233d754eec20f07997f exiscan-acl-4.24-13.patch 290551
diff --git a/net-mail/exim/files/digest-exim-4.24-r2 b/net-mail/exim/files/digest-exim-4.24-r2
deleted file mode 100644
index 72ea7eafa2c7..000000000000
--- a/net-mail/exim/files/digest-exim-4.24-r2
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 74f4116be9b71991b54b91abd7c99eec exim-4.24.tar.gz 1625449
-MD5 c8eb375adc7a7233d754eec20f07997f exiscan-acl-4.24-13.patch 290551
diff --git a/net-mail/exim/files/digest-exim-4.24-r3 b/net-mail/exim/files/digest-exim-4.24-r3
deleted file mode 100644
index 72ea7eafa2c7..000000000000
--- a/net-mail/exim/files/digest-exim-4.24-r3
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 74f4116be9b71991b54b91abd7c99eec exim-4.24.tar.gz 1625449
-MD5 c8eb375adc7a7233d754eec20f07997f exiscan-acl-4.24-13.patch 290551
diff --git a/net-mail/exim/files/digest-exim-4.30 b/net-mail/exim/files/digest-exim-4.30
deleted file mode 100644
index 2a8c077a8ce7..000000000000
--- a/net-mail/exim/files/digest-exim-4.30
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 ba8fe22a527172bc3cf6481ba26712cb exim-4.30.tar.gz 1670421
-MD5 9e20b18f2be3983d73777b4f85b5db15 exiscan-acl-4.30-16.patch 367351
diff --git a/net-mail/exim/files/digest-exim-4.30-r1 b/net-mail/exim/files/digest-exim-4.30-r1
deleted file mode 100644
index 082fdb20e1d1..000000000000
--- a/net-mail/exim/files/digest-exim-4.30-r1
+++ /dev/null
@@ -1 +0,0 @@
-MD5 ba8fe22a527172bc3cf6481ba26712cb exim-4.30.tar.gz 1670421
diff --git a/net-mail/exim/files/digest-exim-4.31 b/net-mail/exim/files/digest-exim-4.31
deleted file mode 100644
index eaabfbaa925e..000000000000
--- a/net-mail/exim/files/digest-exim-4.31
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 1bbc5823cd32d5a00175f32de104503f exim-4.31.tar.gz 1700513
-MD5 69fe6fce9e0ca72aaf2319a87e672fbf exiscan-acl-4.31-16.patch 367277
diff --git a/net-mail/exim/files/digest-exim-4.32 b/net-mail/exim/files/digest-exim-4.32
deleted file mode 100644
index ff81698596a3..000000000000
--- a/net-mail/exim/files/digest-exim-4.32
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 27bbde30300200c2780cff7c7cbc6f8d exim-4.32.tar.gz 1706875
-MD5 8c49a4a25abe85ed69523a479567e24a exiscan-acl-4.32-18.patch 384568
diff --git a/net-mail/exim/files/digest-exim-4.32-r1 b/net-mail/exim/files/digest-exim-4.32-r1
deleted file mode 100644
index cf12c67744f8..000000000000
--- a/net-mail/exim/files/digest-exim-4.32-r1
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 27bbde30300200c2780cff7c7cbc6f8d exim-4.32.tar.gz 1706875
-MD5 c2f90a62f0535ccd3114f8d07a670af9 exiscan-acl-4.32-19.patch 391654
diff --git a/net-mail/exim/files/digest-exim-4.33 b/net-mail/exim/files/digest-exim-4.33
deleted file mode 100644
index 9b87feb03933..000000000000
--- a/net-mail/exim/files/digest-exim-4.33
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 8514c800172e4ab4e9cb90553605e1f2 exim-4.33.tar.bz2 1327741
-MD5 5e9d3be31121ea5ece12d872a368717c exiscan-acl-4.33-20.patch 395525
diff --git a/net-mail/exim/files/digest-exim-4.33-r1 b/net-mail/exim/files/digest-exim-4.33-r1
deleted file mode 100644
index 9b87feb03933..000000000000
--- a/net-mail/exim/files/digest-exim-4.33-r1
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 8514c800172e4ab4e9cb90553605e1f2 exim-4.33.tar.bz2 1327741
-MD5 5e9d3be31121ea5ece12d872a368717c exiscan-acl-4.33-20.patch 395525
diff --git a/net-mail/exim/files/digest-exim-4.34 b/net-mail/exim/files/digest-exim-4.34
deleted file mode 100644
index 8f852ab954ed..000000000000
--- a/net-mail/exim/files/digest-exim-4.34
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 bab611edc153867334b1c7cffd8fe3c0 exim-4.34.tar.bz2 1328742
-MD5 6fa74ecf1c2a83dbce1e46f991fce27b exiscan-acl-4.34-21.patch 395967
diff --git a/net-mail/exim/files/exim-4.10-gentoo.diff b/net-mail/exim/files/exim-4.10-gentoo.diff
deleted file mode 100644
index 6be612358fa0..000000000000
--- a/net-mail/exim/files/exim-4.10-gentoo.diff
+++ /dev/null
@@ -1,65 +0,0 @@
-*** exim-4.10/src/daemon.c  Mon Jul 22 09:59:48 2002
-- --- daemon.c   Wed Dec  4 10:52:04 2002
-***************
-*** 960,991 ****
-    (b) When -bd is used and -oX is not used, or
-    (c) When -oP is used to supply a path.
-
-! The variable daemon_write_pid is used to control this.
-
-- - Note re use of sprintf: spool_directory and pid_file_path are checked on
-- - input to be < 200 characters. */
-- -
-  if (running_in_test_harness || daemon_write_pid)
-    {
-    FILE *f;
-- -   uschar buff[256];
-- -
-    if (pid_file_path[0] == 0)
-!     sprintf(CS buff, "%s/exim-daemon.pid", spool_directory);
-!   else
-!     sprintf(CS buff, CS pid_file_path, "");   /* Backward compatibility */
-
-!   f = Ufopen(buff, "wb");
-    if (f != NULL)
-      {
-      fprintf(f, "%d\n", (int)getpid());
-      fchmod(fileno(f), 0644);
-      fclose(f);
-!     DEBUG(D_any) debug_printf("pid written to %s\n", buff);
-      }
-    else
-      DEBUG(D_any)
-!       debug_printf("%s\n", string_open_failed(errno, "pid file %s", buff));
-    }
-
-  /* Set up the handler for SIGHUP, which causes a restart of the daemon. */
-- --- 960,987 ----
-    (b) When -bd is used and -oX is not used, or
-    (c) When -oP is used to supply a path.
-
-! The variable daemon_write_pid is used to control this. */
-
-  if (running_in_test_harness || daemon_write_pid)
-    {
-    FILE *f;
-    if (pid_file_path[0] == 0)
-!     pid_file_path = string_sprintf("%s/exim-daemon.pid", spool_directory);
-
-!   f = Ufopen(pid_file_path, "wb");
-    if (f != NULL)
-      {
-      fprintf(f, "%d\n", (int)getpid());
-      fchmod(fileno(f), 0644);
-      fclose(f);
-!     DEBUG(D_any) debug_printf("pid written to %s\n", pid_file_path);
-      }
-    else
-+     {
-      DEBUG(D_any)
-!       debug_printf("%s\n", string_open_failed(errno, "pid file %s",
-!         pid_file_path));
-!     }
-    }
-
-  /* Set up the handler for SIGHUP, which causes a restart of the daemon. */
diff --git a/net-mail/exim/files/exim-4.14-tail.patch b/net-mail/exim/files/exim-4.14-tail.patch
deleted file mode 100644
index 481dca9b80d4..000000000000
--- a/net-mail/exim/files/exim-4.14-tail.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- scripts/Configure-config.h.orig	2003-07-17 18:01:19.000000000 -0400
-+++ scripts/Configure-config.h	2003-07-17 18:01:25.000000000 -0400
-@@ -41,7 +41,7 @@
- 
- # Double-check that config.h is complete.
- 
--if [ "`tail -1 config.h`" != "/* End of config.h */" ] ; then
-+if [ "`tail -n 1 config.h`" != "/* End of config.h */" ] ; then
-   echo "*** config.h appears to be incomplete"
-   echo "*** unexpected failure in buildconfig program"
-   exit 1
diff --git a/net-mail/exim/files/exim-4.20-maildir.patch b/net-mail/exim/files/exim-4.20-maildir.patch
deleted file mode 100644
index 3cb198d545c1..000000000000
--- a/net-mail/exim/files/exim-4.20-maildir.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-diff -urN ./exim-4.20.orig/src/configure.default exim-4.20/src/configure.default
---- ./exim-4.20.orig/src/configure.default	2003-06-27 16:48:22.000000000 -0700
-+++ exim-4.20/src/configure.default	2003-06-27 16:52:20.000000000 -0700
-@@ -451,7 +451,9 @@
- 
- local_delivery:
-   driver = appendfile
--  file = /var/mail/$local_part
-+#  file = /var/mail/$local_part
-+  directory = /home/$local_part/.maildir
-+  maildir_format
-   delivery_date_add
-   envelope_to_add
-   return_path_add
diff --git a/net-mail/exim/files/exim-4.30-conf.patch b/net-mail/exim/files/exim-4.30-conf.patch
deleted file mode 100644
index 5d154b96f71e..000000000000
--- a/net-mail/exim/files/exim-4.30-conf.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- src/configure.default.orig	2004-03-29 22:48:24.000000000 +0100
-+++ src/configure.default.orig.patch-01	2004-03-29 22:57:10.000000000 +0100
-@@ -41,6 +41,16 @@
- #                    MAIN CONFIGURATION SETTINGS                     #
- ######################################################################
- 
-+# This Sets up the default log location to syslog, specifically to the "mail"
-+# Facility. Please note that you may want to change this, as other mail, 
-+# relatively noisy mail programs also log to the mail facility (eg. courier)
-+
-+# Note: 
-+# If exim cannot log to syslog it will try to log to, /var/log/exim/exim_%s.log
-+log_file_path=syslog
-+
-+
-+
- # Specify your host's canonical name here. This should normally be the fully
- # qualified "official" name of your host. If this option is not set, the
- # uname() function is called to obtain the name. In many cases this does
diff --git a/net-mail/exim/files/exim-4.33-r1-header-syntax.patch b/net-mail/exim/files/exim-4.33-r1-header-syntax.patch
deleted file mode 100644
index 06cef16b17db..000000000000
--- a/net-mail/exim/files/exim-4.33-r1-header-syntax.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-*** exim-4.33/src/verify.c  Wed May  5 11:08:36 2004
---- verify.c	Thu May  6 14:36:40 2004
-***************
-*** 1264,1282 ****
-
-      if (recipient == NULL && Ustrcmp(errmess, "empty address") != 0)
-        {
--       uschar hname[64];
--       uschar *t = h->text;
--       uschar *tt = hname;
-        uschar *verb = US"is";
-        int len;
-
--       while (*t != ':') *tt++ = *t++;
--       *tt = 0;
--
-        /* Arrange not to include any white space at the end in the
-        error message. */
-
--       t = ss;
-        while (t > s && isspace(t[-1])) t--;
-
-        /* Add the address which failed to the error message, since in a
---- 1264,1276 ----
-
-      if (recipient == NULL && Ustrcmp(errmess, "empty address") != 0)
-        {
-        uschar *verb = US"is";
-+       uschar *t = ss;
-        int len;
-
-        /* Arrange not to include any white space at the end in the
-        error message. */
-
-        while (t > s && isspace(t[-1])) t--;
-
-        /* Add the address which failed to the error message, since in a
diff --git a/net-mail/exim/files/exim.confd b/net-mail/exim/files/exim.confd
deleted file mode 100644
index a3974d33b406..000000000000
--- a/net-mail/exim/files/exim.confd
+++ /dev/null
@@ -1,2 +0,0 @@
-# Command-line options for running exim
-EXIM_OPTS="-bd -q15m"
diff --git a/net-mail/exim/files/exim.rc6 b/net-mail/exim/files/exim.rc6
deleted file mode 100644
index b72a531adaf2..000000000000
--- a/net-mail/exim/files/exim.rc6
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-mail/exim/files/exim.rc6,v 1.9 2004/03/06 03:19:44 vapier Exp $
-
-depend() {
-	need logger net
-	provide mta
-}
-
-start() {
-	ebegin "Starting exim"
-	start-stop-daemon --start --quiet --exec /usr/sbin/exim -- ${EXIM_OPTS:--bd -q15m}
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping exim"
-	start-stop-daemon --stop --quiet --exec /usr/sbin/exim
-	eend $?
-}
diff --git a/net-mail/exim/files/exiscan.conf b/net-mail/exim/files/exiscan.conf
deleted file mode 100644
index ae9ec8ec0be3..000000000000
--- a/net-mail/exim/files/exiscan.conf
+++ /dev/null
@@ -1,555 +0,0 @@
-# These are configuration exacmples for getting exiscan going on your
-# system  Changes must be made to /etc/exim/exim.conf to enable the
-# exiscan facility.
-
-# Global options
-# -------------------------------------------------------------------------
-# These options apply to all facilities.
-
-# exiscan_condition   (string, mantadory, default unset)
-# ------------------------------------------------------
-# This option is the "master condition" that is evaluated to see if
-# ANY exiscan facility should be used to scan the current message. If
-# the condition does not apply, exiscan just skips over the message (no
-# facilities are used). When this options is not set, exiscan will
-# be disabled. Note: facilities have individual conditions as well.
-# 
-# Example: to make exiscan only work on messages coming in with SMTP or
-#          ESMTP, use
-#
-#          exiscan_condition = \ 
-#             ${if or {{eq{$received_protocol}{esmtp}} \
-#                      {eq{$received_protocol}{smtp}}} \
-#                         {1}{0} }
-
-exiscan_condition = 1
-
-# exiscan_crypt_salt   (string, mantadory, default unset)
-# -------------------------------------------------------
-# exiscan inserts a crypt()ed version of the message ID into the header
-# when it has successfully scanned a message. This 'tag' is used to
-# determine if the message is 'clean' if it should be re-sent or delayed.
-# The exiscan_crypt_salt setting defines a 2-character string to be used
-# as a "seed" for the crypt process. You MUST set this option to a
-# 2-character string, otherwise exiscan will be disabled.
-
-exiscan_crypt_salt = fo
-
-# exiscan_unpack_mime   (bool, optional, default "true")
-# ------------------------------------------------------
-# Normally, exiscan unpacks MIME and TNEF containers (Thanks to
-# Paul L. Daniels ripMIME library).
-# If your scanner is able to scan on mailpacks (MBOX style files)
-# directly, we do not need to unpack the mails. ONLY disable this
-# option if this works with your scanner ! The default is "true",
-# so you do not need to explicitly set this option.
-
-exiscan_unpack_mime = true
-
-# exiscan_timeout   (time,optional, default "15m")
-# ------------------------------------------------
-# To cope with mishaps in the scanner process, exim uses a timeout on
-# the exiscan function call. If exiscan does not return in the given
-# timeframe, exim will assume a local problem and temporarily reject
-# the message. This timeout tells exim how long it will wait for
-# exiscan to return. The default is 900 seconds (15 minutes).
-
-exiscan_timeout = 30s
-
-
-# Antivirus facility (av) options
-# ---------------------------------------------------------------------
-# These options are used by the antivirus facility. You need an
-# external virus scanner on your system.
-
-# exiscan_av_condition   (string, default unset)
-# ----------------------------------------------
-# If this condition evaluates to "true", exiscan will call the virus
-# scanner facility on that message.
-#
-# Example: To scan ALL messages, just set this variable to "1"
-#
-#          exiscan_av_condition = 1
-
-exiscan_av_condition = 1
-
-# exiscan_av_action   (string, default 'reject')
-# ----------------------------------------------
-# This defines the action exiscan should take when it finds a virus
-# in the message.
-# Possible values are 'pass','reject','blackhole','freeze' or
-# 'redirect <address>'. When this option is unset, it defaults to
-# 'reject'.
-#
-# Example: redirect messages with viruses to postmaster
-#
-#          exiscan_av_action = redirect postmaster@mydomain.com
-
-exiscan_av_action = reject
-
-# exiscan_av_scanner   (string, default unset)
-# --------------------------------------------
-# This option tells exiscan what type of virus scanner to use. It
-# can be one of
-#
-#   keyword   | scanner
-#   -------------------------------------------------------------
-#   cmdline   | generic command line scanner
-#   sophie    | sophie AV daemon (http://www.vanja.com/tools/sophie/)
-#   kavdaemon | Kapersky AVP Daemon 3.x (http://www.kapersky.com)
-#   openav    | OpenAV scanner daemon (http://www.openantivirus.org)
-#
-# Depending on the scanner type you choose with this option, you
-# need to declare one or more further options below.
-
-exiscan_av_scanner = cmdline
-
-# exiscan_av_scanner_path   (string, default unset)
-# -------------------------------------------------
-# This option is needed ONLY for the cmdline av scanner type.
-# It contains the path to the virus scanner executable
-# That means FULL ABSOLUTE PATH AND EXECUTABLE !
-# Sorry for the caps but people keep messing this up.
-#
-# Example: Sophos Sweep in /usr/local/bin
-#
-#          exiscan_av_scanner_path = /usr/local/bin/sweep
-
-# exiscan_av_scanner_path = /usr/bin/sweep
-
-# exiscan_av_scanner_options   (string, default unset)
-# ----------------------------------------------------
-# This option is needed ONLY for the cmdline av scanner type.
-# It containts the options to be passed to the scanner on the command
-# line.
-# ATTENTION: the given string MUST containe ONE pipe ('|') symbol,
-# which will be replaced by exiscan with the path to be scanned.
-# Normally, the pipe will be at the end of the string, but some
-# scanners may also expect it somewhere else.
-#
-# Example: this works for Sophos Sweep
-#
-#           exiscan_av_scanner_options = -all -archive -ss |
-
-# exiscan_av_scanner_options = -all -archive -ss |
-
-# exiscan_av_scanner_regexp_trigger   (string, default unset)
-# -----------------------------------------------------------
-# This option is needed ONLY for the cmdline av scanner type.
-# exiscan parses both STDOUT and STDERR output of the scanner, line
-# by line. To determine if a virus was found, we use a perl-compatible
-# regular expression. In the simplest case, this will simply be a
-# string just like the example below which will work with Sophos Sweep.
-#
-# Example: this works for Sophos Sweep
-#
-#          exiscan_av_scanner_regexp_trigger = found in
-
-exiscan_av_scanner_regexp_trigger = found in
-
-# exiscan_av_scanner_regexp_description   (string, default unset)
-# ---------------------------------------------------------------
-# This option is needed ONLY for the cmdline av scanner type.
-# It contains a regular expression to fish the viruses' name out
-# of the scanner output.
-# IMPORTANT: this expression MUST contain exactly ONE pair of braces,
-# matching the substring with the virus info.
-# Typically, the braces will contain '.*', to match any number
-# of any character inside. To the left and right of the braces, you
-# should place other matching criteria, of course !
-#
-# Example: Sophos Sweep reports a virus on a line like this:
-#
-#           >>> Virus 'W32/Magistr-B' found in file ./those.bat
-#
-#          We want to get the W32/Magistr-B string, so we can match
-#          for the single quotes left and right of it, resulting in
-#          the regex '(.*)' (WITH the quotes!)
-#
-#          exiscan_av_scanner_regexp_description = '(.*)'
-
-exiscan_av_scanner_regexp_description = '(.*)'
-
-# exiscan_av_sophie_socket  (string, default unset)
-# -------------------------------------------------
-# This option is needed ONLY for the sophie av scanner type.
-# Sophie opens a unix socket in your file system. The default is
-# /var/run/sophie.
-# Please make sure that exim can access that socket (permissions!).
-# Also make sure that the user that Sophie runs with (./configure
-# option !!) is allowed to read the exim queue directory.
-# Sophie drops privileges, so while it may show up as running as root
-# in 'ps', it may have set its effective UID to another user !
-# Ideally, exims and sophies effective user settings should be the
-# same.
-#
-# Example:
-#
-#          exiscan_av_sophie_socket = /var/run/sophie
-
-# exiscan_av_sophie_socket = /var/run/sophie
-
-# exiscan_av_kavdaemon_socket   (string, default unset)
-# -----------------------------------------------------
-# This option is needed ONLY for the kavdaemon av scanner type.
-# kavdaemon opens a unix socket in your file system. The default
-# is /opt/AVP/AvpCtl.
-# Please make sure that exim can access that socket (permissions!).
-# Also make sure that the user that kavdaemon runs with is allowed
-# to read the exim queue directory.
-#
-# Attention: you need to run kavdaemon with the disinfection option
-# disabled, and with proper path settings, like this:
-#
-#   ./kavdaemon -E -f=/opt/AVP /
-#
-# Note the slash at the end, it is important. /opt/AVP is the
-# default AVP base directory.
-#
-# Example:
-#
-#          exiscan_av_kavdaemon_socket = /opt/AVP/AvpCtl
-
-# exiscan_av_kavdaemon_socket = /opt/AVP/AvpCtl
-
-# exiscan_av_openav_host   (string, default unset)
-# -----------------------------------------------------
-# This option is needed ONLY for the openav av scanner type.
-# It must be set to the IP address or hostname your openav
-# scanner daemon is operating on.
-# You must also set exiscan_av_openav_host along with this
-# option.
-#
-# Example: to use the openav daemon on the local host, use
-#
-#          exiscan_av_openav_host = 127.0.0.1
-#
-# exiscan_av_openav_port   (string, default unset)
-# -----------------------------------------------------
-# This option is needed ONLY for the openav av scanner type.
-# It must be set to the port number your openav scanner daemon
-# is operating on. It is usually '8127'.
-# You must also set exiscan_av_openav_host along with this
-# option.
-#
-# Example: to use the openav daemon on the port 8127, set
-#
-#          exiscan_av_openav_port = 8127
-
-# exiscan_av_openav_host = 127.0.0.1
-# exiscan_av_openav_port = 8127
-
-
-# Antispam facility (spamd) options
-# ---------------------------------------------------------------------
-# These options are used by the antispam facility. You need to install
-# SpamAssassin on your system. You can get it at
-#
-#   http://www.spamassassin.org
-#
-# exiscan uses the 'spamd' daemon directly, it needs to run in order for
-# this facility to work.
-#
-# Please read the section on header lines and actions further below to
-# learn what you can do with this facility.
-
-# exiscan_spamd_condition   (string, default unset)
-# -------------------------------------------------
-# If this condition evaluates to "true", exiscan will call the
-# antispam facility on that message.
-# Please read the "Setting Conditions" section below for more
-# information on setting conditions.
-#
-# Example: To scan ALL messages, just set this variable to "1"
-#
-#          exiscan_spamd_condition = 1
-
-exiscan_spamd_condition = 0
-
-# exiscan_spamd_action   (string, default unset)
-# ----------------------------------------------
-# This defines the action exiscan should take when a message
-# exceeds the defined spam score treshold (see below).
-# Possible values are 'pass','reject','blackhole','freeze' or
-# 'redirect <address>'. When this option is unset, it defaults to
-# 'pass' (meaning that only a header with spam info is added to
-# the message - see section "Header Lines" below).
-# Important: Please read the "Setting Actions" section below for more
-# information on actions.
-#
-# Example: reject messages exceeding the spam score treshold
-#
-#          exiscan_spamd_action = reject
-
-# exiscan_spamd_action = reject
-
-# exiscan_spamd_header_style   (string, default "single")
-# -------------------------------------------------------
-# This setting defines how much information the spamd facility
-# will add to the headers of the message. The following settings
-# are available:
-#
-#  none   - This will not add any spam info header to the message.
-#           When not using exiscan_spamd_treshold, this is quite
-#           useless.
-#  single - This will add the X-Spam-Score header (see the HEADERS
-#           section below)
-#  flag   - This will add the X-Spam-Score header and, if the
-#           messages' score is over the treshold, the X-Spam-Flag
-#           header. (see the HEADERS section below)
-#  full   - This will add the X-Spam-Score header and, if the
-#           messages' score is over the treshold, the X-Spam-Flag
-#           header and the FULL spamassassin report in clear text
-#           as a multiline header called "X-Spam-Report".
-#
-# Example:  exiscan_spamd_header_style = full
-
-# exiscan_spamd_header_style = full
-
-# exiscan_spamd_subject_tag  (string, default unset)
-# --------------------------------------------------
-# If you want to "tag" the subject of messages which have a spam
-# score greater than the exiscan_spamd_treshold, you can set this
-# option to a string that will be prepended to the subject.
-# This is only useful if exiscan_spamd_action is "pass".
-# End-user MUAs can then filter on that string in the subject.
-#
-# Example: if you set
-#
-#          exiscan_spamd_subject_tag = *SPAM*
-#
-#          the subject "URGENT BUSINESS PROPOSAL" will be
-#          changed into "*SPAM* URGENT BUSINESS PROPOSAL".
-
-# exiscan_spamd_subject_tag = *****SPAM*****
-
-# exiscan_spamd_treshold   (integer, default 999)
-# ----------------------------------------------
-# This defines the number of "spam score" points a message must
-# exceed to be classified as "spam" by exiscan. The default value
-# is very high, so if you only want to add headers to messages,
-# you do not need to set this option. Sensible value ranges
-# are 4-20. The lower you set this value, the more spam you may
-# catch, however the possibility of false positives is also higher.
-#
-# Example: set spam score treshold to 6 points
-#
-#          exiscan_spamd_treshold = 6
-
-# exiscan_spamd_treshold = 15
-
-# exiscan_spamd_address   (string, default unset)
-# -----------------------------------------------
-# This contains the IP address and port where the spamd is listening,
-# separated by a whitespace. By default, it resides on localhost port
-# 783. You can also run it on another machine to decrease the load on
-# the mail server. Uncommenting this option turns off the antispam
-# facility.
-#
-# Example: spamd running on localhost with default port
-#
-#          exiscan_spamd_address = 127.0.0.1 783
-
-# exiscan_spamd_address = 127.0.0.1 783
-
-
-# Regular expression scanning facility (regex) options
-# ---------------------------------------------------------------------
-# This facility can be used to scan a message for a set of regular
-# expressions. The scanning will be done line-by-line on the complete
-# message, including all headers, except for exiscan's own X- header.
-#
-# This facility is handy for blocking content that cannot yet be caught
-# by your AV scanner, or to crack down on spam (try 'mortgage' :).
-#
-# To prevent double bounces, this facility will not scan bounce messages
-# (messages with an empty envelope sender)
-
-# exiscan_regex_condition   (string, default unset)
-# -------------------------------------------------
-# If this condition evaluates to "true", exiscan will call the
-# regex facility on that message.
-# Please read the "Setting Conditions" section below for more
-# information on setting conditions.
-#
-# Example: To regex scan ALL messages, just set this variable to "1"
-#
-#          exiscan_regex_condition = 1
-
-exiscan_regex_condition = 0
-
-# exiscan_regex_action   (string, default 'reject')
-# -------------------------------------------------
-# This defines the action exiscan should take when a message
-# matches a defined regular expression.
-# Possible values are 'pass','reject','blackhole','freeze' or
-# 'redirect <address>'. When this option is unset, it defaults to
-# 'reject'.
-# Important: Please read the "Setting Actions" section below for more
-# information on actions.
-#
-# Example: blackhole messages matching a regular expression
-#
-#          exiscan_regex_action = blackhole
-
-# exiscan_regex_action = reject
-
-# exiscan_regex_data   (string, default unset)
-# --------------------------------------------
-# This option contains the regular expressions you wish to match
-# against messages, as a colon-separated list.
-# To put a colon inside a regular expression, you need to double
-# it (::).
-#
-# Example: Match 'mortgate' with case-insensitive 'm' and
-#          'make money'
-#
-#          exiscan_regex_data = [Mm]ortage : make money
-
-# exiscan_regex_data =
-
-
-# File extension scanning facility (extension) options
-# --------------------------------------------------------------------
-# This facility can be used to block mails containing files with
-# specific extensions, mostly those that may cause harm on the Windows
-# platform (vbs,pif,bat,exe,com etc.).
-#
-# To prevent double bounces, this facility will not scan bounce messages
-# (messages with an empty envelope sender)
-
-# exiscan_extension_condition   (string, default unset)
-# -----------------------------------------------------
-# If this condition evaluates to "true", exiscan will call the
-# extension facility on that message.
-# Please read the "Setting Conditions" section below for more
-# information on setting conditions.
-#
-# Example: To regex scan ALL messages, just set this variable to "1"
-#
-#          exiscan_extension_condition = 1
-
-exiscan_extension_condition = 0
-
-# exiscan_extension_action   (string, default 'reject')
-# -----------------------------------------------------
-# This defines the action exiscan should take when a message
-# contains one of the defined file types.
-# Possible values are 'pass','reject','blackhole','freeze' or
-# 'redirect <address>'. When this option is unset, it defaults to
-# 'reject'.
-# Important: Please read the "Setting Actions" section below for more
-# information on actions.
-#
-# Example: freeze messages containing an unwanted file type
-#
-#          exiscan_extension_action = freeze
-
-# exiscan_extension_action = freeze
-
-# exiscan_extension_data   (string, default unset)
-# ------------------------------------------------
-# This option contains the file extension for which you would like
-# to scan messages, as a colon-separated list.
-#
-# Example: Match 'exe', 'com', and 'vbs'
-#
-#          exiscan_extension_data = exe:com:vbs
-
-# exiscan_extension_data = exe:com:vbs
-
-
-
-
-# SETTING CONDITIONS
-# ------------------------------------------------------------------------------
-#
-# exiscan has five 'condition' options (see above): one 'master' condition and
-# one per facility. Each of these conditions is a string that may contain
-# 'expandable' components. Read chapter 11 of the exim 4 spec to learn more
-# about string expansion in exim.
-#
-# A condition is 'false' when it
-#
-#   - is unset
-#   - expands to 0 (string or number)
-#
-# All other values result in a 'true' condition.
-#
-# The master condition (option exiscan_condition) decides if exiscan is run
-# on a message. You should use it to skip messages that do not need to be
-# scanned. Typically, you will only want to scan messages that come in via
-# smtp or esmtp:
-#
-#   exiscan_condition = \
-#                 ${if or {{eq{$received_protocol}{esmtp}} \
-#                          {eq{$received_protocol}{smtp}}} \
-#                             {1}{0} }
-#
-# This will skip scanning messages coming from local sources or from authen-
-# ticated senders (asmtp).
-#
-# Each facility has its own condition to decide if it should be applied to
-# a message (exiscan-<facility>-condition). For example, you can use those
-# with file lookups to use a facility only on specific sender or recipient
-# domains. The excercise is left up to the reader :)
-#
-# To make a condition always true, just set it to '1'.
-#
-#
-# SETTING ACTIONS
-# ------------------------------------------------------------------------------
-#
-# Every facility in exiscan that 'matches' a message (found a virus, spam over
-# treshold, found regex/extension) can trigger a configurable action. Each
-# facility has an "action" option (exiscan_<facility>_action) where you can set
-# the action identifier for that facility.
-#
-# The following actions are available:
-#
-#   - reject    The message is rejected with a permanent error (5xx), stating
-#               the cause including information for the sender of the message.
-#
-#   - freeze    The message is accepted and immediately frozen, with the cause
-#               saved in the header file. The postmaster can then review the
-#               frozen messages and eventually thaw or delete them.
-#               (NB: does someone want to write a web frontend for that task ?
-#               Submissions welcome ;)
-#               IMPORTANT: If you use an automatic unfreeze timer in your exim
-#               config, exim will automatically thaw these messages after the
-#               specified time, resulting in delivery !
-#               It might also be a good idea to use exim's 'move_frozen_messages'
-#               option in conjunction with this action.
-#
-#   - blackhole The message is accepted and then destroyed by removing all reci-
-#               pients. I do not recommended to use this action unless you have
-#               a good cause to do so.
-#
-#   - redirect <newaddress>  The messages' envelope recipients are replaced by
-#                            an address stated behind the 'redirect' parameter.
-#                            Example:
-#
-#                              exiscan_spamd_action = redirect the@new.address
-#
-#                            Since the original envelope addresses are destroyed
-#                            by that action, you must rely on the headers to
-#                            figure out the intended original recipients.
-#
-#   - pass      No action is taken on the message, except that the facility
-#               will add it's X- header line to the message. This is especially
-#               useful for the spamd facility, if you only want to "mark" spam.
-#               See the "added headers" section below to learn what headers
-#               exiscan adds to messages.
-#
-# The facilities are called in the following order:
-#
-#   1 - av
-#   2 - extension
-#   3 - regex
-#   4 - spamd
-#
-# When a facility "matches" a message, processing is stopped and the proper return
-# code is passed to exim, except if the action for this facility is set to "pass".
-# The "spamd" facility is called last, since it takes the most processing time. The
-# "av" facility is called first, since both "extension" and "regex" may block the
-# same message too, only without giving valuable information.
diff --git a/net-mail/exim/files/mailer.conf b/net-mail/exim/files/mailer.conf
deleted file mode 100644
index a0d702f22579..000000000000
--- a/net-mail/exim/files/mailer.conf
+++ /dev/null
@@ -1,35 +0,0 @@
-#	$OpenBSD: mailer.conf,v 1.3 2000/04/06 18:24:19 millert Exp $
-#
-# Execute the "real" sendmail program from exim, 
-# named /usr/sbin/exim
-#
-sendmail	/usr/sbin/exim
-send-mail	/usr/sbin/exim
-mailq		/usr/sbin/exim
-newaliases	/usr/sbin/exim
-rsmtp		/usr/sbin/exim
-rmail		/usr/sbin/exim
-mail		/usr/sbin/exim
-
-# Execute the "real" sendmail program from postfix, 
-# named /usr/sbin/sendmail.postfix
-#
-#sendmail	/usr/sbin/sendmail.postfix
-#send-mail	/usr/sbin/sendmail.postfix
-#mailq		/usr/sbin/sendmail.postfix
-#newaliases	/usr/sbin/sendmail.postfix
-
-# Execute the "real" sendmail program from ssmtp, 
-# named /usr/sbin/ssmtp
-#
-#sendmail	/usr/sbin/ssmtp
-#mailq		/usr/sbin/ssmtp
-#newaliases	/usr/sbin/ssmtp
-# Execute the "real" sendmail program, named /usr/sbin/sendmail
-#
-#sendmail	/usr/sbin/sendmail.sendmail
-#send-mail	/usr/sbin/sendmail.sendmail
-#mailq		/usr/sbin/sendmail.sendmail
-#newaliases	/usr/sbin/sendmail.sendmail
-#hoststat	/usr/sbin/sendmail.sendmail
-#purgestat	/usr/sbin/sendmail.sendmail
diff --git a/net-mail/exim/files/pam.d-exim b/net-mail/exim/files/pam.d-exim
deleted file mode 100644
index 9b3a1d211063..000000000000
--- a/net-mail/exim/files/pam.d-exim
+++ /dev/null
@@ -1,3 +0,0 @@
-# You may need to remove the "md5"
-auth required pam_unix.so shadow md5
-account required pam_unix.so
diff --git a/net-mail/exim/files/system_filter.exim b/net-mail/exim/files/system_filter.exim
deleted file mode 100644
index 9a916b68fddb..000000000000
--- a/net-mail/exim/files/system_filter.exim
+++ /dev/null
@@ -1,220 +0,0 @@
-# Exim filter
-## Version: 0.13
-#	$Id: system_filter.exim,v 1.1 2001/08/14 20:17:21 lamer Exp $
-
-## If you haven't worked with exim filters before, read
-## the install notes at the end of this file.
-
-#
-# Only run any of this stuff on the first pass through the
-# filter - this is an optomisation for messages that get
-# queued and have several delivery attempts
-#
-# we express this in reverse so we can just bail out
-# on inappropriate messages
-#
-if not first_delivery
-then
-  finish
-endif
-
-# Check for MS buffer overruns as per latest BUGTRAQ.
-# http://www.securityfocus.com/frames/?content=/templates/article.html%3Fid%3D61
-# This could happen in error messages, hence its placing
-# here...
-# We substract the first n characters of the date header
-# and test if its the same as the date header... which
-# is a lousy way of checking if the date is longer than
-# n chars long
-if ${length_80:$header_date:} is not $header_date:
-then
-  fail text "This message has been rejected because it has\n\
-	     \tan overlength date field which can be used\n\
-	     \tto subvert Microsoft mail programs\n\
-             \tThe following URL has further information\n\
-	     \thttp://www.securityfocus.com/frames/?content=/templates/article.html%3Fid%3D61"
-  seen finish
-endif
-
-# This is a nasty compromise.
-# This crud is now being sent with a <> envelope sender, but
-# blocking all error messages that pattern match prevents
-# bounces getting back.... so we fudge it somewhat
-if $header_from: contains "@sexyfun.net"
-then
-  fail text "This message has been rejected since it has\n\
-		\tthe signature of a known virus in the header."
-  seen finish
-endif
-if error_message and $header_from: contains "Mailer-Daemon@"
-then
-  # looks like a real error message - just ignore it
-  finish
-endif
-
-# Look for single part MIME messages with suspicious name extensions
-# Check Content-Type header using quoted filename [content_type_quoted_fn_match]
-if $header_content-type: matches "(?:file)?name=(\"[^\"]+\\\\.(?:vb[se]|ws[fh]|jse?|exe|com|cmd|shs|hta|bat|scr|pif)\")"
-then
-  fail text "This message has been rejected because it has\n\
-	     \tpotentially executable content $1\n\
-	     \tThis form of attachment has been used by\n\
-             \trecent viruses or other malware.\n\
-	     \tIf you meant to send this file then please\n\
-	     \tpackage it up as a zip file and resend it."
-  seen finish
-endif
-# same again using unquoted filename [content_type_unquoted_fn_match]
-if $header_content-type: matches "(?:file)?name=([\\\\w.-]+\\\\.(?:vb[se]|ws[fh]|jse?|exe|com|cmd|shs|hta|bat|scr|pif))"
-then
-  fail text "This message has been rejected because it has\n\
-	     \tpotentially executable content $1\n\
-	     \tThis form of attachment has been used by\n\
-             \trecent viruses or other malware.\n\
-	     \tIf you meant to send this file then please\n\
-	     \tpackage it up as a zip file and resend it."
-  seen finish
-endif
-
-
-# Attempt to catch embedded VBS attachments
-# in emails.   These were used as the basis for 
-# the ILOVEYOU virus and its variants
-# Quoted filename - [body_quoted_fn_match]
-if $message_body matches "(?:Content-(?:Type:(?>\\\\s*)[\\\\w-]+/[\\\\w-]+|Disposition:(?>\\\\s*)attachment);(?>\\\\s*)(?:file)?name=|begin(?>\\\\s+)[0-7]{3,4}(?>\\\\s+))(\"[^\"]+\\\\.(?:vb[se]|ws[fh]|jse?|exe|com|cmd|shs|hta|bat|scr|pif)\")[\\\\s;]"
-then
-  fail text "This message has been rejected because it has\n\
-	     \ta potentially executable attachment $1\n\
-	     \tThis form of attachment has been used by\n\
-             \trecent viruses or other malware.\n\
-	     \tIf you meant to send this file then please\n\
-	     \tpackage it up as a zip file and resend it."
-  seen finish
-endif
-# same again using unquoted filename [body_unquoted_fn_match]
-if $message_body matches "(?:Content-(?:Type:(?>\\\\s*)[\\\\w-]+/[\\\\w-]+|Disposition:(?>\\\\s*)attachment);(?>\\\\s*)(?:file)?name=|begin(?>\\\\s+)[0-7]{3,4}(?>\\\\s+))([\\\\w.-]+\\\\.(?:vb[se]|ws[fh]|jse?|exe|com|cmd|shs|hta|bat|scr|pif))[\\\\s;]"
-then
-  fail text "This message has been rejected because it has\n\
-	     \ta potentially executable attachment $1\n\
-	     \tThis form of attachment has been used by\n\
-             \trecent viruses or other malware.\n\
-	     \tIf you meant to send this file then please\n\
-	     \tpackage it up as a zip file and resend it."
-  seen finish
-endif
-
-#### Version history
-#
-# 0.01 5 May 2000
-#	Initial release
-# 0.02 8 May 2000
-#	Widened list of content-types accepted, added WSF extension
-# 0.03 8 May 2000
-#	Embedded the install notes in for those that don't do manuals
-# 0.04 9 May 2000
-#	Check global content-type header.  Efficiency mods to REs
-# 0.05 9 May 2000
-#	More minor efficiency mods, doc changes
-# 0.06 20 June 2000
-#	Added extension handling - thx to Douglas Gray Stephens & Jeff Carnahan
-# 0.07 19 July 2000
-#	Latest MS Outhouse bug catching
-# 0.08 19 July 2000
-#	Changed trigger length to 80 chars, fixed some spelling
-# 0.09 29 September 2000
-#	More extensions... its getting so we should just allow 2 or 3 through
-# 0.10 18 January 2001
-#	Removed exclusion for error messages - this is a little nasty
-#	since it has other side effects, hence we do still exclude
-#	on unix like error messages
-# 0.11 20 March, 2001
-#	Added CMD extension, tidied docs slightly, added RCS tag
-#	** Missed changing version number at top of file :-(
-# 0.12 10 May, 2001
-#	Added HTA extension
-# 0.13 22 May, 2001
-#	Reformatted regexps and code to build them so that they are
-#	shorter than the limits on pre exim 3.20 filters.  This will
-#	make them significantly less efficient, but I am getting so
-#	many queries about this that requiring 3.2x appears unsupportable.
-#
-#### Install Notes
-#
-# Exim filters run the exim filter language - a very primitive
-# scripting language - in place of a user .forward file, or on
-# a per system basis (on all messages passing through).
-# The filtering capability is documented in the main set of manuals
-# a copy of which can be found on the exim web site
-#	http://www.exim.org/
-#
-# To install, copy the filter file (with appropriate permissions)
-# to /etc/exim/system_filter.exim and add to your exim config file
-# [location is installation depedant - typicaly /etc/exim/config ]
-# at the top the line:-
-#	message_filter = /etc/exim/system_filter.exim
-#	message_body_visible = 5000
-#
-# You may also want to set the message_filter_user & message_filter_group
-# options, but they default to the standard exim user and so can
-# be left untouched.  The other message_filter_* options are only
-# needed if you modify this to do other functions such as deliveries.
-# The main exim documentation is quite thorough and so I see no need
-# to expand it here...
-#
-# Any message that matches the filter will then be bounced.
-# If you wish you can change the error message by editing it
-# in the section above - however be careful you don't break it.
-#
-# After install exim should be restarted - a kill -HUP to the
-# daemon will do this.
-#
-#### LIMITATIONS
-#
-# This filter tries to parse MIME with a regexp... that doesn't
-# work too well.  It will also only see the amount of the body
-# specified in message_body_visible
-#
-#### BASIS
-#
-# The regexp that is used to pickup MIME/uuencoded parts is replicated
-# below (in perl format).  You need to remember that exim converts
-# newlines to spaces in the message_body variable.
-#
-#  (?:Content-					# start of content header
-#  (?:Type: (?>\s*)				# rest of c/t header
-#    [\w-]+/[\w-]+				# content-type (any)
-#    |Disposition: (?>\s*)			# content-disposition hdr
-#    attachment)					# content-disposition
-#  ;(?>\s*)					# ; space or newline
-#  (?:file)?name=				# filename=/name= 
-#  |begin (?>\s+) [0-7]{3,4} (?>\s+)) 		# begin octal-mode
-#  (\"[^\"]+\.					# quoted filename.
-#	(?:vb[se]				# list of extns
-#	|ws[fh]
-#	|jse?
-#	|exe
-#	|com
-#	|cmd
-#	|shs
-#	|hta
-#	|bat
-#	|scr
-#	|pif)
-#	\"					# end quote
-#  |[\w.-]+\.					# unquoted filename.ext
-#	(?:vb[se]				# list of extns
-#	|ws[fh]
-#	|jse?
-#	|exe
-#	|com
-#	|cmd
-#	|shs
-#	|hta
-#	|bat
-#	|scr
-#	|pif)
-#  )						# end of filename capture
-#  [\s;]					# trailing ;/space/newline
-#
-#
-### [End]