old

7 files changed, 0 insertions, 1230 deletions

diff --git a/net-misc/openssh/files/openssh-4.4_p1-ldap-hpn-glue.patch b/net-misc/openssh/files/openssh-4.4_p1-ldap-hpn-glue.patch
deleted file mode 100644
index 20e796b5f975..000000000000
--- a/net-misc/openssh/files/openssh-4.4_p1-ldap-hpn-glue.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-allow ldap and hpn patches to play nice
-
---- servconf.c
-+++ servconf.c
-@@ -116,24 +116,6 @@
- 	options->num_allow_groups = 0;
- 	options->num_deny_groups = 0;
- 	options->ciphers = NULL;
--	options->macs = NULL;
--	options->protocol = SSH_PROTO_UNKNOWN;
--	options->gateway_ports = -1;
--	options->num_subsystems = 0;
--	options->max_startups_begin = -1;
--	options->max_startups_rate = -1;
--	options->max_startups = -1;
--	options->max_authtries = -1;
--	options->banner = NULL;
--	options->use_dns = -1;
--	options->client_alive_interval = -1;
--	options->client_alive_count_max = -1;
--	options->authorized_keys_file = NULL;
--	options->authorized_keys_file2 = NULL;
--	options->num_accept_env = 0;
--	options->permit_tun = -1;
--	options->num_permitted_opens = -1;
--	options->adm_forced_command = NULL;
- #ifdef WITH_LDAP_PUBKEY
- 	/* XXX dirty */
- 	options->lpk.ld = NULL;
-@@ -152,6 +134,24 @@
- 	options->lpk.flags = FLAG_EMPTY;
- #endif
- 
-+	options->macs = NULL;
-+	options->protocol = SSH_PROTO_UNKNOWN;
-+	options->gateway_ports = -1;
-+	options->num_subsystems = 0;
-+	options->max_startups_begin = -1;
-+	options->max_startups_rate = -1;
-+	options->max_startups = -1;
-+	options->max_authtries = -1;
-+	options->banner = NULL;
-+	options->use_dns = -1;
-+	options->client_alive_interval = -1;
-+	options->client_alive_count_max = -1;
-+	options->authorized_keys_file = NULL;
-+	options->authorized_keys_file2 = NULL;
-+	options->num_accept_env = 0;
-+	options->permit_tun = -1;
-+	options->num_permitted_opens = -1;
-+	options->adm_forced_command = NULL;
- }
- 
- void
diff --git a/net-misc/openssh/files/openssh-4.9_p1-x509-hpn-glue.patch b/net-misc/openssh/files/openssh-4.9_p1-x509-hpn-glue.patch
deleted file mode 100644
index a024b7140080..000000000000
--- a/net-misc/openssh/files/openssh-4.9_p1-x509-hpn-glue.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-move things around so hpn applies cleanly when using X509
-
---- servconf.c
-+++ servconf.c
-@@ -106,6 +106,17 @@
- 	options->log_level = SYSLOG_LEVEL_NOT_SET;
- 	options->rhosts_rsa_authentication = -1;
- 	options->hostbased_authentication = -1;
-+	options->hostbased_algorithms = NULL;
-+	options->pubkey_algorithms = NULL;
-+	ssh_x509flags_initialize(&options->x509flags, 1);
-+#ifndef SSH_X509STORE_DISABLED
-+	ssh_x509store_initialize(&options->ca);
-+#endif /*ndef SSH_X509STORE_DISABLED*/
-+#ifdef SSH_OCSP_ENABLED
-+	options->va.type = -1;
-+	options->va.certificate_file = NULL;
-+	options->va.responder_url = NULL;
-+#endif /*def SSH_OCSP_ENABLED*/
- 	options->hostbased_uses_name_from_packet_only = -1;
- 	options->rsa_authentication = -1;
- 	options->pubkey_authentication = -1;
-@@ -147,18 +158,6 @@
- 	options->num_permitted_opens = -1;
- 	options->adm_forced_command = NULL;
- 	options->chroot_directory = NULL;
--
--	options->hostbased_algorithms = NULL;
--	options->pubkey_algorithms = NULL;
--	ssh_x509flags_initialize(&options->x509flags, 1);
--#ifndef SSH_X509STORE_DISABLED
--	ssh_x509store_initialize(&options->ca);
--#endif /*ndef SSH_X509STORE_DISABLED*/
--#ifdef SSH_OCSP_ENABLED
--	options->va.type = -1;
--	options->va.certificate_file = NULL;
--	options->va.responder_url = NULL;
--#endif /*def SSH_OCSP_ENABLED*/
- }
- 
- void
-@@ -329,6 +329,16 @@
- 	/* Portable-specific options */
- 	sUsePAM,
- 	/* Standard Options */
-+	sHostbasedAlgorithms,
-+	sPubkeyAlgorithms,
-+	sX509KeyAlgorithm,
-+	sAllowedClientCertPurpose,
-+	sKeyAllowSelfIssued, sMandatoryCRL,
-+	sCACertificateFile, sCACertificatePath,
-+	sCARevocationFile, sCARevocationPath,
-+	sCAldapVersion, sCAldapURL,
-+	sVAType, sVACertificateFile,
-+	sVAOCSPResponderURL,
- 	sPort, sHostKeyFile, sServerKeyBits, sLoginGraceTime, sKeyRegenerationTime,
- 	sPermitRootLogin, sLogFacility, sLogLevel,
- 	sRhostsRSAAuthentication, sRSAAuthentication,
-@@ -351,16 +361,6 @@
- 	sGssAuthentication, sGssCleanupCreds, sAcceptEnv, sPermitTunnel,
- 	sMatch, sPermitOpen, sForceCommand,
- 	sUsePrivilegeSeparation,
--	sHostbasedAlgorithms,
--	sPubkeyAlgorithms,
--	sX509KeyAlgorithm,
--	sAllowedClientCertPurpose,
--	sKeyAllowSelfIssued, sMandatoryCRL,
--	sCACertificateFile, sCACertificatePath,
--	sCARevocationFile, sCARevocationPath,
--	sCAldapVersion, sCAldapURL,
--	sVAType, sVACertificateFile,
--	sVAOCSPResponderURL,
- 	sDeprecated, sUnsupported
- } ServerOpCodes;
- 
---- Makefile.in
-+++ Makefile.in
-@@ -44,11 +44,12 @@
- CC=@CC@
- LD=@LD@
- CFLAGS=@CFLAGS@
--CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ @LDAP_CPPFLAGS@ $(PATHS) @DEFS@
-+CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
- LIBS=@LIBS@
- SSHDLIBS=@SSHDLIBS@
- LIBEDIT=@LIBEDIT@
- LIBLDAP=@LDAP_LDFLAGS@ @LDAP_LIBS@
-+CPPFLAGS += @LDAP_CPPFLAGS@
- AR=@AR@
- AWK=@AWK@
- RANLIB=@RANLIB@
diff --git a/net-misc/openssh/openssh-5.0_p1-r2.ebuild b/net-misc/openssh/openssh-5.0_p1-r2.ebuild
deleted file mode 100644
index f9216aa7d0fd..000000000000
--- a/net-misc/openssh/openssh-5.0_p1-r2.ebuild
+++ /dev/null
@@ -1,167 +0,0 @@
-# Copyright 1999-2009 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/openssh-5.0_p1-r2.ebuild,v 1.3 2009/08/13 06:30:33 vapier Exp $
-
-inherit eutils flag-o-matic multilib autotools pam
-
-# Make it more portable between straight releases
-# and _p? releases.
-PARCH=${P/_/}
-
-X509_PATCH="${PARCH}+x509-6.1.1.diff.gz"
-#LDAP_PATCH="${PARCH/openssh-4.9/openssh-lpk-4.6}-0.3.9.patch"
-HPN_PATCH="${PARCH}-hpn13v3.diff.gz"
-
-DESCRIPTION="Port of OpenBSD's free SSH release"
-HOMEPAGE="http://www.openssh.org/"
-SRC_URI="mirror://openbsd/OpenSSH/portable/${PARCH}.tar.gz
-	http://www.sxw.org.uk/computing/patches/openssh-5.0p1-gsskex-20080404.patch
-	${LDAP_PATCH:+ldap? ( http://dev.inversepath.com/openssh-lpk/${LDAP_PATCH} )}
-	${X509_PATCH:+X509? ( http://roumenpetrov.info/openssh/x509-6.1.1/${X509_PATCH} )}
-	${HPN_PATCH:+hpn? ( http://www.psc.edu/networking/projects/hpn-ssh/${HPN_PATCH} )}"
-
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~sparc-fbsd ~x86 ~x86-fbsd"
-IUSE="static pam tcpd kerberos skey selinux X509 ldap smartcard hpn libedit X"
-
-RDEPEND="pam? ( virtual/pam )
-	kerberos? ( virtual/krb5 )
-	selinux? ( >=sys-libs/libselinux-1.28 )
-	skey? ( >=sys-auth/skey-1.1.5-r1 )
-	ldap? ( net-nds/openldap )
-	libedit? ( dev-libs/libedit )
-	>=dev-libs/openssl-0.9.6d
-	>=sys-libs/zlib-1.2.3
-	smartcard? ( dev-libs/opensc )
-	tcpd? ( >=sys-apps/tcp-wrappers-7.6 )
-	X? ( x11-apps/xauth )
-	userland_GNU? ( sys-apps/shadow )"
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	virtual/os-headers
-	sys-devel/autoconf"
-RDEPEND="${RDEPEND}
-	pam? ( sys-auth/pambase )"
-PROVIDE="virtual/ssh"
-
-S=${WORKDIR}/${PARCH}
-
-pkg_setup() {
-	# this sucks, but i'd rather have people unable to `emerge -u openssh`
-	# than not be able to log in to their server any more
-	maybe_fail() { [[ -z ${!2} ]] && use ${1} && echo ${1} ; }
-	local fail="
-		$(maybe_fail X509 X509_PATCH)
-		$(maybe_fail ldap LDAP_PATCH)
-	"
-	fail=$(echo ${fail})
-	if [[ -n ${fail} ]] ; then
-		eerror "Sorry, but this version does not yet support features"
-		eerror "that you requested:	 ${fail}"
-		eerror "Please mask ${PF} for now and check back later:"
-		eerror " # echo '=${CATEGORY}/${PF}' >> /etc/portage/package.mask"
-		die "booooo"
-	fi
-}
-
-src_unpack() {
-	unpack ${PARCH}.tar.gz
-	cd "${S}"
-
-	sed -i \
-		-e '/_PATH_XAUTH/s:/usr/X11R6/bin/xauth:/usr/bin/xauth:' \
-		pathnames.h || die
-
-	use X509 && epatch "${DISTDIR}"/${X509_PATCH} "${FILESDIR}"/${PN}-4.9_p1-x509-hpn-glue.patch
-	use smartcard && epatch "${FILESDIR}"/openssh-3.9_p1-opensc.patch
-	if ! use X509 ; then
-		if [[ -n ${LDAP_PATCH} ]] && use ldap ; then
-			epatch "${DISTDIR}"/${LDAP_PATCH} "${FILESDIR}"/${PN}-4.4_p1-ldap-hpn-glue.patch
-			epatch "${FILESDIR}"/${P}-lpk-64bit.patch #210110
-		fi
-		epatch "${DISTDIR}"/openssh-5.0p1-gsskex-20080404.patch #115553 #216932
-	else
-		use ldap && ewarn "Sorry, X509 and ldap don't get along, disabling ldap"
-		epatch "${FILESDIR}"/${PN}-4.7_p1-GSSAPI-dns.patch #165444 integrated into gsskex
-	fi
-	[[ -n ${HPN_PATCH} ]] && use hpn && epatch "${DISTDIR}"/${HPN_PATCH}
-	epatch "${FILESDIR}"/${PN}-4.7p1-selinux.diff #191665
-
-	sed -i "s:-lcrypto:$(pkg-config --libs openssl):" configure{,.ac} || die
-
-	eautoreconf
-}
-
-src_compile() {
-	addwrite /dev/ptmx
-	addpredict /etc/skey/skeykeys #skey configure code triggers this
-
-	local myconf=""
-	if use static ; then
-		append-ldflags -static
-		use pam && ewarn "Disabling pam support becuse of static flag"
-		myconf="${myconf} --without-pam"
-	else
-		myconf="${myconf} $(use_with pam)"
-	fi
-
-	econf \
-		--with-ldflags="${LDFLAGS}" \
-		--disable-strip \
-		--sysconfdir=/etc/ssh \
-		--libexecdir=/usr/$(get_libdir)/misc \
-		--datadir=/usr/share/openssh \
-		--disable-suid-ssh \
-		--with-privsep-path=/var/empty \
-		--with-privsep-user=sshd \
-		--with-md5-passwords \
-		--with-ssl-engine \
-		$(use_with ldap) \
-		$(use_with libedit) \
-		$(use_with kerberos kerberos5 /usr) \
-		$(use_with tcpd tcp-wrappers) \
-		$(use_with selinux) \
-		$(use_with skey) \
-		$(use_with smartcard opensc) \
-		${myconf} \
-		|| die "bad configure"
-	emake || die "compile problem"
-}
-
-src_install() {
-	emake install-nokeys DESTDIR="${D}" || die
-	fperms 600 /etc/ssh/sshd_config
-	dobin contrib/ssh-copy-id
-	newinitd "${FILESDIR}"/sshd.rc6 sshd
-	newconfd "${FILESDIR}"/sshd.confd sshd
-	keepdir /var/empty
-
-	newpamd "${FILESDIR}"/sshd.pam_include.2 sshd
-	use pam \
-		&& dosed "/^#UsePAM /s:.*:UsePAM yes:" /etc/ssh/sshd_config \
-		&& dosed "/^#PasswordAuthentication /s:.*:PasswordAuthentication no:" /etc/ssh/sshd_config
-
-	doman contrib/ssh-copy-id.1
-	dodoc ChangeLog CREDITS OVERVIEW README* TODO sshd_config
-
-	diropts -m 0700
-	dodir /etc/skel/.ssh
-}
-
-pkg_postinst() {
-	enewgroup sshd 22
-	enewuser sshd 22 -1 /var/empty sshd
-
-	# help fix broken perms caused by older ebuilds.
-	# can probably cut this after the next stage release.
-	chmod u+x "${ROOT}"/etc/skel/.ssh >& /dev/null
-
-	ewarn "Remember to merge your config files in /etc/ssh/ and then"
-	ewarn "reload sshd: '/etc/init.d/sshd reload'."
-	if use pam ; then
-		echo
-		ewarn "Please be aware users need a valid shell in /etc/passwd"
-		ewarn "in order to be allowed to login."
-	fi
-}
diff --git a/net-misc/openssh/openssh-5.1_p1-r3.ebuild b/net-misc/openssh/openssh-5.1_p1-r3.ebuild
deleted file mode 100644
index 07b224d6c8c6..000000000000
--- a/net-misc/openssh/openssh-5.1_p1-r3.ebuild
+++ /dev/null
@@ -1,180 +0,0 @@
-# Copyright 1999-2009 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/openssh-5.1_p1-r3.ebuild,v 1.5 2009/08/13 06:30:33 vapier Exp $
-
-inherit eutils flag-o-matic multilib autotools pam
-
-# Make it more portable between straight releases
-# and _p? releases.
-PARCH=${P/_/}
-
-X509_PATCH="${PARCH}+x509-6.1.1.diff.gz"
-LDAP_PATCH="${PARCH/openssh/openssh-lpk}-0.3.10.patch.gz"
-HPN_PATCH="${PARCH}-hpn13v5.diff.gz"
-
-DESCRIPTION="Port of OpenBSD's free SSH release"
-HOMEPAGE="http://www.openssh.org/"
-SRC_URI="mirror://openbsd/OpenSSH/portable/${PARCH}.tar.gz
-	http://www.sxw.org.uk/computing/patches/openssh-5.0p1-gsskex-20080404.patch
-	${LDAP_PATCH:+ldap? ( mirror://gentoo/${LDAP_PATCH} )}
-	${X509_PATCH:+X509? ( http://roumenpetrov.info/openssh/x509-6.1.1/${X509_PATCH} )}
-	${HPN_PATCH:+hpn? ( http://www.psc.edu/networking/projects/hpn-ssh/${HPN_PATCH} )}"
-	#${LDAP_PATCH:+ldap? ( http://dev.inversepath.com/openssh-lpk/${LDAP_PATCH} )}
-
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~sparc-fbsd ~x86 ~x86-fbsd"
-IUSE="static pam tcpd kerberos skey selinux X509 ldap smartcard hpn libedit X"
-
-RDEPEND="pam? ( virtual/pam )
-	kerberos? ( virtual/krb5 )
-	selinux? ( >=sys-libs/libselinux-1.28 )
-	skey? ( >=sys-auth/skey-1.1.5-r1 )
-	ldap? ( net-nds/openldap )
-	libedit? ( dev-libs/libedit )
-	>=dev-libs/openssl-0.9.6d
-	>=sys-libs/zlib-1.2.3
-	smartcard? ( dev-libs/opensc )
-	tcpd? ( >=sys-apps/tcp-wrappers-7.6 )
-	X? ( x11-apps/xauth )
-	userland_GNU? ( sys-apps/shadow )"
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	virtual/os-headers
-	sys-devel/autoconf"
-RDEPEND="${RDEPEND}
-	pam? ( >=sys-auth/pambase-20081028 )"
-PROVIDE="virtual/ssh"
-
-S=${WORKDIR}/${PARCH}
-
-pkg_setup() {
-	# this sucks, but i'd rather have people unable to `emerge -u openssh`
-	# than not be able to log in to their server any more
-	maybe_fail() { [[ -z ${!2} ]] && use ${1} && echo ${1} ; }
-	local fail="
-		$(maybe_fail X509 X509_PATCH)
-		$(maybe_fail ldap LDAP_PATCH)
-	"
-	fail=$(echo ${fail})
-	if [[ -n ${fail} ]] ; then
-		eerror "Sorry, but this version does not yet support features"
-		eerror "that you requested:	 ${fail}"
-		eerror "Please mask ${PF} for now and check back later:"
-		eerror " # echo '=${CATEGORY}/${PF}' >> /etc/portage/package.mask"
-		die "booooo"
-	fi
-}
-
-src_unpack() {
-	unpack ${PARCH}.tar.gz
-	cd "${S}"
-
-	sed -i \
-		-e '/_PATH_XAUTH/s:/usr/X11R6/bin/xauth:/usr/bin/xauth:' \
-		pathnames.h || die
-
-	use X509 && epatch "${DISTDIR}"/${X509_PATCH} "${FILESDIR}"/${PN}-5.1_p1-x509-{headers,hpn-glue}.patch
-	use smartcard && epatch "${FILESDIR}"/openssh-3.9_p1-opensc.patch
-	if ! use X509 ; then
-		if [[ -n ${LDAP_PATCH} ]] && use ldap ; then
-			# The patch for bug 210110 64-bit stuff is now included.
-			epatch "${DISTDIR}"/${LDAP_PATCH}
-			epatch "${FILESDIR}"/${PN}-5.1_p1-ldap-hpn-glue.patch
-		fi
-		#epatch "${DISTDIR}"/openssh-5.0p1-gsskex-20080404.patch #115553 #216932
-	else
-		use ldap && ewarn "Sorry, X509 and ldap don't get along, disabling ldap"
-	fi
-	epatch "${FILESDIR}"/${PN}-4.7_p1-GSSAPI-dns.patch #165444 integrated into gsskex
-	[[ -n ${HPN_PATCH} ]] && use hpn && epatch "${DISTDIR}"/${HPN_PATCH}
-	epatch "${FILESDIR}"/${PN}-4.7p1-selinux.diff #191665
-
-	sed -i "s:-lcrypto:$(pkg-config --libs openssl):" configure{,.ac} || die
-
-	epatch "${FILESDIR}"/${P}-null-banner.patch #244222
-	epatch "${FILESDIR}"/${P}-escaped-banner.patch #244222
-	epatch "${FILESDIR}"/${P}-better-ssp-check.patch
-
-	# Disable PATH reset, trust what portage gives us. bug 254615
-	sed -i -e 's:^PATH=/:#PATH=/:' configure || die
-
-	eautoreconf
-}
-
-src_compile() {
-	addwrite /dev/ptmx
-	addpredict /etc/skey/skeykeys #skey configure code triggers this
-
-	local myconf=""
-	if use static ; then
-		append-ldflags -static
-		use pam && ewarn "Disabling pam support becuse of static flag"
-		myconf="${myconf} --without-pam"
-	else
-		myconf="${myconf} $(use_with pam)"
-	fi
-
-	econf \
-		--with-ldflags="${LDFLAGS}" \
-		--disable-strip \
-		--sysconfdir=/etc/ssh \
-		--libexecdir=/usr/$(get_libdir)/misc \
-		--datadir=/usr/share/openssh \
-		--with-privsep-path=/var/empty \
-		--with-privsep-user=sshd \
-		--with-md5-passwords \
-		--with-ssl-engine \
-		${LDAP_PATCH:+$(use ldap && use_with ldap)} \
-		$(use_with libedit) \
-		$(use_with kerberos kerberos5 /usr) \
-		$(use_with tcpd tcp-wrappers) \
-		$(use_with selinux) \
-		$(use_with skey) \
-		$(use_with smartcard opensc) \
-		${myconf} \
-		|| die "bad configure"
-	emake || die "compile problem"
-}
-
-src_install() {
-	emake install-nokeys DESTDIR="${D}" || die
-	fperms 600 /etc/ssh/sshd_config
-	dobin contrib/ssh-copy-id
-	newinitd "${FILESDIR}"/sshd.rc6 sshd
-	newconfd "${FILESDIR}"/sshd.confd sshd
-	keepdir /var/empty
-
-	newpamd "${FILESDIR}"/sshd.pam_include.2 sshd
-	if use pam; then
-		sed -i \
-			-e "/^#UsePAM /s:.*:UsePAM yes:" \
-			-e "/^#PasswordAuthentication /s:.*:PasswordAuthentication no:" \
-			-e "/^#PrintMotd /s:.*:PrintMotd no:" \
-			-e "/^#PrintLastLog /s:.*:PrintLastLog no:" \
-			"${D}"/etc/ssh/sshd_config || die "sed of configuration file failed"
-	fi
-
-	doman contrib/ssh-copy-id.1
-	dodoc ChangeLog CREDITS OVERVIEW README* TODO sshd_config
-
-	diropts -m 0700
-	dodir /etc/skel/.ssh
-}
-
-pkg_postinst() {
-	enewgroup sshd 22
-	enewuser sshd 22 -1 /var/empty sshd
-
-	# help fix broken perms caused by older ebuilds.
-	# can probably cut this after the next stage release.
-	chmod u+x "${ROOT}"/etc/skel/.ssh >& /dev/null
-
-	ewarn "Remember to merge your config files in /etc/ssh/ and then"
-	ewarn "reload sshd: '/etc/init.d/sshd reload'."
-	if use pam ; then
-		echo
-		ewarn "Please be aware users need a valid shell in /etc/passwd"
-		ewarn "in order to be allowed to login."
-	fi
-}
diff --git a/net-misc/openssh/openssh-5.2_p1-r1.ebuild b/net-misc/openssh/openssh-5.2_p1-r1.ebuild
deleted file mode 100644
index 062a0d92ca7d..000000000000
--- a/net-misc/openssh/openssh-5.2_p1-r1.ebuild
+++ /dev/null
@@ -1,226 +0,0 @@
-# Copyright 1999-2009 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/openssh-5.2_p1-r1.ebuild,v 1.12 2009/08/13 06:30:33 vapier Exp $
-
-inherit eutils flag-o-matic multilib autotools pam
-
-# Make it more portable between straight releases
-# and _p? releases.
-PARCH=${P/_/}
-
-#HPN_PATCH="${PARCH/2/1}-hpn13v5.diff.gz"
-LDAP_PATCH="${PARCH/openssh/openssh-lpk}-0.3.11.patch.gz"
-PKCS11_PATCH="${PARCH/p1}pkcs11-0.26.tar.bz2"
-X509_VER="6.2" X509_PATCH="${PARCH}+x509-${X509_VER}.diff.gz"
-
-DESCRIPTION="Port of OpenBSD's free SSH release"
-HOMEPAGE="http://www.openssh.org/"
-SRC_URI="mirror://openbsd/OpenSSH/portable/${PARCH}.tar.gz
-	http://www.sxw.org.uk/computing/patches/openssh-5.0p1-gsskex-20080404.patch
-	${HPN_PATCH:+hpn? ( http://www.psc.edu/networking/projects/hpn-ssh/${HPN_PATCH} )}
-	${LDAP_PATCH:+ldap? ( mirror://gentoo/${LDAP_PATCH} )}
-	${PKCS11_PATCH:+pkcs11? ( http://alon.barlev.googlepages.com/${PKCS11_PATCH} )}
-	${X509_PATCH:+X509? ( http://roumenpetrov.info/openssh/x509-${X509_VER}/${X509_PATCH} )}"
-
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="alpha amd64 arm hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc ~sparc-fbsd x86 ~x86-fbsd"
-IUSE="hpn kerberos ldap libedit pam pkcs11 selinux skey smartcard static tcpd X X509"
-
-RDEPEND="pam? ( virtual/pam )
-	kerberos? ( virtual/krb5 )
-	selinux? ( >=sys-libs/libselinux-1.28 )
-	skey? ( >=sys-auth/skey-1.1.5-r1 )
-	ldap? ( net-nds/openldap )
-	libedit? ( dev-libs/libedit )
-	>=dev-libs/openssl-0.9.6d
-	>=sys-libs/zlib-1.2.3
-	smartcard? ( dev-libs/opensc )
-	pkcs11? ( dev-libs/pkcs11-helper )
-	tcpd? ( >=sys-apps/tcp-wrappers-7.6 )
-	X? ( x11-apps/xauth )
-	userland_GNU? ( sys-apps/shadow )"
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	virtual/os-headers
-	sys-devel/autoconf"
-RDEPEND="${RDEPEND}
-	pam? ( >=sys-auth/pambase-20081028 )"
-PROVIDE="virtual/ssh"
-
-S=${WORKDIR}/${PARCH}
-
-pkg_setup() {
-	# this sucks, but i'd rather have people unable to `emerge -u openssh`
-	# than not be able to log in to their server any more
-	maybe_fail() { [[ -z ${!2} ]] && use ${1} && echo ${1} ; }
-	local fail="
-		$(maybe_fail ldap LDAP_PATCH)
-		$(maybe_fail pkcs11 PKCS11_PATCH)
-		$(maybe_fail X509 X509_PATCH)
-	"
-	fail=$(echo ${fail})
-	if [[ -n ${fail} ]] ; then
-		eerror "Sorry, but this version does not yet support features"
-		eerror "that you requested:	 ${fail}"
-		eerror "Please mask ${PF} for now and check back later:"
-		eerror " # echo '=${CATEGORY}/${PF}' >> /etc/portage/package.mask"
-		die "booooo"
-	fi
-}
-
-src_unpack() {
-	unpack ${PARCH}.tar.gz
-	cd "${S}"
-
-	sed -i \
-		-e '/_PATH_XAUTH/s:/usr/X11R6/bin/xauth:/usr/bin/xauth:' \
-		pathnames.h || die
-
-	if use pkcs11 ; then
-		cd "${WORKDIR}"
-		unpack "${PKCS11_PATCH}"
-		cd "${S}"
-		EPATCH_OPTS="-p1" epatch "${WORKDIR}"/*pkcs11*/{1,2,4}*
-		use X509 && EPATCH_OPTS="-R" epatch "${WORKDIR}"/*pkcs11*/1000_all_log.patch
-	fi
-	use X509 && epatch "${DISTDIR}"/${X509_PATCH}
-	use smartcard && epatch "${FILESDIR}"/openssh-3.9_p1-opensc.patch
-	if ! use X509 ; then
-		if [[ -n ${LDAP_PATCH} ]] && use ldap ; then
-			# The patch for bug 210110 64-bit stuff is now included.
-			epatch "${DISTDIR}"/${LDAP_PATCH}
-			# Not needed anymore of 0.3.11. Merged into the main patch.
-			#epatch "${FILESDIR}"/${PN}-5.1_p1-ldap-hpn-glue.patch
-
-			# Fixup per bug #266654
-			epatch "${FILESDIR}"/${PN}-5.2p1-ldap-stdargs.diff
-		fi
-		#epatch "${DISTDIR}"/openssh-5.0p1-gsskex-20080404.patch #115553 #216932
-	else
-		use ldap && ewarn "Sorry, X509 and ldap don't get along, disabling ldap"
-	fi
-	epatch "${FILESDIR}"/${PN}-4.7_p1-GSSAPI-dns.patch #165444 integrated into gsskex
-	[[ -n ${HPN_PATCH} ]] && use hpn && epatch "${DISTDIR}"/${HPN_PATCH}
-	epatch "${FILESDIR}"/${PN}-4.7p1-selinux.diff #191665
-
-	sed -i "s:-lcrypto:$(pkg-config --libs openssl):" configure{,.ac} || die
-
-	# Disable PATH reset, trust what portage gives us. bug 254615
-	sed -i -e 's:^PATH=/:#PATH=/:' configure || die
-
-	eautoreconf
-}
-
-src_compile() {
-	addwrite /dev/ptmx
-	addpredict /etc/skey/skeykeys #skey configure code triggers this
-
-	local myconf=""
-	if use static ; then
-		append-ldflags -static
-		use pam && ewarn "Disabling pam support becuse of static flag"
-		myconf="${myconf} --without-pam"
-	else
-		myconf="${myconf} $(use_with pam)"
-	fi
-
-	econf \
-		--with-ldflags="${LDFLAGS}" \
-		--disable-strip \
-		--sysconfdir=/etc/ssh \
-		--libexecdir=/usr/$(get_libdir)/misc \
-		--datadir=/usr/share/openssh \
-		--with-privsep-path=/var/empty \
-		--with-privsep-user=sshd \
-		--with-md5-passwords \
-		--with-ssl-engine \
-		$(use_with kerberos kerberos5 /usr) \
-		${LDAP_PATCH:+$(use ldap && use_with ldap)} \
-		$(use_with libedit) \
-		${PKCS11_PATCH:+$(use pkcs11 && use_with pkcs11)} \
-		$(use_with selinux) \
-		$(use_with skey) \
-		$(use_with smartcard opensc) \
-		$(use_with tcpd tcp-wrappers) \
-		${myconf} \
-		|| die "bad configure"
-	emake || die "compile problem"
-}
-
-src_install() {
-	emake install-nokeys DESTDIR="${D}" || die
-	fperms 600 /etc/ssh/sshd_config
-	dobin contrib/ssh-copy-id
-	newinitd "${FILESDIR}"/sshd.rc6 sshd
-	newconfd "${FILESDIR}"/sshd.confd sshd
-	keepdir /var/empty
-
-	newpamd "${FILESDIR}"/sshd.pam_include.2 sshd
-	if use pam ; then
-		sed -i \
-			-e "/^#UsePAM /s:.*:UsePAM yes:" \
-			-e "/^#PasswordAuthentication /s:.*:PasswordAuthentication no:" \
-			-e "/^#PrintMotd /s:.*:PrintMotd no:" \
-			-e "/^#PrintLastLog /s:.*:PrintLastLog no:" \
-			"${D}"/etc/ssh/sshd_config || die "sed of configuration file failed"
-	fi
-
-	doman contrib/ssh-copy-id.1
-	dodoc ChangeLog CREDITS OVERVIEW README* TODO sshd_config
-
-	diropts -m 0700
-	dodir /etc/skel/.ssh
-}
-
-src_test() {
-	local t tests skipped failed passed shell
-	tests="interop-tests compat-tests"
-	skipped=""
-	shell=$(getent passwd ${UID} | cut -d: -f7)
-	if [[ ${shell} == */nologin ]] || [[ ${shell} == */false ]] ; then
-		elog "Running the full OpenSSH testsuite"
-		elog "requires a usable shell for the 'portage'"
-		elog "user, so we will run a subset only."
-		skipped="${skipped} tests"
-	else
-		tests="${tests} tests"
-	fi
-	for t in ${tests} ; do
-		# Some tests read from stdin ...
-		emake -k -j1 ${t} </dev/null \
-			&& passed="${passed}${t} " \
-			|| failed="${failed}${t} "
-	done
-	einfo "Passed tests: ${passed}"
-	ewarn "Skipped tests: ${skipped}"
-	if [[ -n ${failed} ]] ; then
-		ewarn "Failed tests: ${failed}"
-		die "Some tests failed: ${failed}"
-	else
-		einfo "Failed tests: ${failed}"
-		return 0
-	fi
-}
-
-pkg_postinst() {
-	enewgroup sshd 22
-	enewuser sshd 22 -1 /var/empty sshd
-
-	# help fix broken perms caused by older ebuilds.
-	# can probably cut this after the next stage release.
-	chmod u+x "${ROOT}"/etc/skel/.ssh >& /dev/null
-
-	ewarn "Remember to merge your config files in /etc/ssh/ and then"
-	ewarn "reload sshd: '/etc/init.d/sshd reload'."
-	if use pam ; then
-		echo
-		ewarn "Please be aware users need a valid shell in /etc/passwd"
-		ewarn "in order to be allowed to login."
-	fi
-	if use pkcs11 ; then
-		echo
-		einfo "For PKCS#11 you should also emerge one of the askpass softwares"
-		einfo "Example: net-misc/x11-ssh-askpass"
-	fi
-}
diff --git a/net-misc/openssh/openssh-5.2_p1-r2.ebuild b/net-misc/openssh/openssh-5.2_p1-r2.ebuild
deleted file mode 100644
index dc9734bd8fdd..000000000000
--- a/net-misc/openssh/openssh-5.2_p1-r2.ebuild
+++ /dev/null
@@ -1,259 +0,0 @@
-# Copyright 1999-2009 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/openssh-5.2_p1-r2.ebuild,v 1.13 2009/10/07 18:22:57 vapier Exp $
-
-inherit eutils flag-o-matic multilib autotools pam
-
-# Make it more portable between straight releases
-# and _p? releases.
-PARCH=${P/_/}
-
-HPN_PATCH="${PARCH}-hpn13v6.diff.gz"
-LDAP_PATCH="${PARCH/openssh/openssh-lpk}-0.3.11.patch.gz"
-PKCS11_PATCH="${PARCH/p1}pkcs11-0.26.tar.bz2"
-X509_VER="6.2" X509_PATCH="${PARCH}+x509-${X509_VER}.diff.gz"
-
-DESCRIPTION="Port of OpenBSD's free SSH release"
-HOMEPAGE="http://www.openssh.org/"
-# HPN appears twice as sometimes Gentoo has a custom version of it.
-SRC_URI="mirror://openbsd/OpenSSH/portable/${PARCH}.tar.gz
-	http://www.sxw.org.uk/computing/patches/openssh-5.0p1-gsskex-20080404.patch
-	${HPN_PATCH:+hpn? ( mirror://gentoo/${HPN_PATCH} )}
-	${HPN_PATCH:+hpn? ( http://www.psc.edu/networking/projects/hpn-ssh/${HPN_PATCH} )}
-	${LDAP_PATCH:+ldap? ( mirror://gentoo/${LDAP_PATCH} )}
-	${PKCS11_PATCH:+pkcs11? ( http://alon.barlev.googlepages.com/${PKCS11_PATCH} )}
-	${X509_PATCH:+X509? ( http://roumenpetrov.info/openssh/x509-${X509_VER}/${X509_PATCH} )}"
-
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~sparc-fbsd ~x86 ~x86-fbsd"
-IUSE="hpn kerberos ldap libedit pam pkcs11 selinux skey smartcard static tcpd X X509"
-
-RDEPEND="pam? ( virtual/pam )
-	kerberos? ( virtual/krb5 )
-	selinux? ( >=sys-libs/libselinux-1.28 )
-	skey? ( >=sys-auth/skey-1.1.5-r1 )
-	ldap? ( net-nds/openldap )
-	libedit? ( dev-libs/libedit )
-	>=dev-libs/openssl-0.9.6d
-	>=sys-libs/zlib-1.2.3
-	smartcard? ( dev-libs/opensc )
-	pkcs11? ( dev-libs/pkcs11-helper )
-	tcpd? ( >=sys-apps/tcp-wrappers-7.6 )
-	X? ( x11-apps/xauth )
-	userland_GNU? ( sys-apps/shadow )"
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	virtual/os-headers
-	sys-devel/autoconf"
-RDEPEND="${RDEPEND}
-	pam? ( >=sys-auth/pambase-20081028 )"
-PROVIDE="virtual/ssh"
-
-S=${WORKDIR}/${PARCH}
-
-pkg_setup() {
-	# this sucks, but i'd rather have people unable to `emerge -u openssh`
-	# than not be able to log in to their server any more
-	maybe_fail() { [[ -z ${!2} ]] && use ${1} && echo ${1} ; }
-	local fail="
-		$(maybe_fail ldap LDAP_PATCH)
-		$(maybe_fail pkcs11 PKCS11_PATCH)
-		$(maybe_fail X509 X509_PATCH)
-	"
-	fail=$(echo ${fail})
-	if [[ -n ${fail} ]] ; then
-		eerror "Sorry, but this version does not yet support features"
-		eerror "that you requested:	 ${fail}"
-		eerror "Please mask ${PF} for now and check back later:"
-		eerror " # echo '=${CATEGORY}/${PF}' >> /etc/portage/package.mask"
-		die "booooo"
-	fi
-}
-
-src_unpack() {
-	unpack ${PARCH}.tar.gz
-	cd "${S}"
-
-	sed -i \
-		-e '/_PATH_XAUTH/s:/usr/X11R6/bin/xauth:/usr/bin/xauth:' \
-		pathnames.h || die
-
-	if use pkcs11 ; then
-		cd "${WORKDIR}"
-		unpack "${PKCS11_PATCH}"
-		cd "${S}"
-		EPATCH_OPTS="-p1" epatch "${WORKDIR}"/*pkcs11*/{1,2,4}*
-		use X509 && EPATCH_OPTS="-R" epatch "${WORKDIR}"/*pkcs11*/1000_all_log.patch
-	fi
-	use X509 && epatch "${DISTDIR}"/${X509_PATCH}
-	use smartcard && epatch "${FILESDIR}"/openssh-3.9_p1-opensc.patch
-	if ! use X509 ; then
-		if [[ -n ${LDAP_PATCH} ]] && use ldap ; then
-			# The patch for bug 210110 64-bit stuff is now included.
-			epatch "${DISTDIR}"/${LDAP_PATCH}
-			# Not needed anymore of 0.3.11. Merged into the main patch.
-			#epatch "${FILESDIR}"/${PN}-5.1_p1-ldap-hpn-glue.patch
-
-			# Fixup per bug #266654
-			epatch "${FILESDIR}"/${PN}-5.2p1-ldap-stdargs.diff
-		fi
-		#epatch "${DISTDIR}"/openssh-5.0p1-gsskex-20080404.patch #115553 #216932
-	else
-		use ldap && ewarn "Sorry, X509 and ldap don't get along, disabling ldap"
-	fi
-	epatch "${FILESDIR}"/${PN}-4.7_p1-GSSAPI-dns.patch #165444 integrated into gsskex
-	[[ -n ${HPN_PATCH} ]] && use hpn && epatch "${DISTDIR}"/${HPN_PATCH}
-	epatch "${FILESDIR}"/${PN}-4.7p1-selinux.diff #191665
-	epatch "${FILESDIR}"/${P}-autoconf.patch
-
-	# in 5.2p1, the AES-CTR multithreaded variant is temporarily broken, and
-	# causes random hangs when combined with the -f switch of ssh.
-	# To avoid this, we change the internal table to use the non-multithread
-	# version for the meantime.
-	sed -i \
-		-e '/aes...-ctr.*SSH_CIPHER_SSH2/s,evp_aes_ctr_mt,evp_aes_128_ctr,' \
-		cipher.c || die
-
-	sed -i "s:-lcrypto:$(pkg-config --libs openssl):" configure{,.ac} || die
-
-	# Disable PATH reset, trust what portage gives us. bug 254615
-	sed -i -e 's:^PATH=/:#PATH=/:' configure || die
-
-	eautoreconf
-}
-
-static_use_with() {
-	local flag=$1
-	if use static && use ${flag} ; then
-		ewarn "Disabling '${flag}' support because of USE='static'"
-		# rebuild args so that we invert the first one (USE flag)
-		# but otherwise leave everything else working so we can
-		# just leverage use_with
-		shift
-		[[ -z $1 ]] && flag="${flag} ${flag}"
-		set -- !${flag} "$@"
-	fi
-	use_with "$@"
-}
-
-src_compile() {
-	addwrite /dev/ptmx
-	addpredict /etc/skey/skeykeys #skey configure code triggers this
-
-	local myconf=""
-	use static && append-ldflags -static
-
-	econf \
-		--with-ldflags="${LDFLAGS}" \
-		--disable-strip \
-		--sysconfdir=/etc/ssh \
-		--libexecdir=/usr/$(get_libdir)/misc \
-		--datadir=/usr/share/openssh \
-		--with-privsep-path=/var/empty \
-		--with-privsep-user=sshd \
-		--with-md5-passwords \
-		--with-ssl-engine \
-		$(static_use_with pam) \
-		$(static_use_with kerberos kerberos5 /usr) \
-		${LDAP_PATCH:+$(use ldap && use_with ldap)} \
-		$(use_with libedit) \
-		${PKCS11_PATCH:+$(use pkcs11 && static_use_with pkcs11)} \
-		$(use_with selinux) \
-		$(use_with skey) \
-		$(use_with smartcard opensc) \
-		$(use_with tcpd tcp-wrappers) \
-		${myconf} \
-		|| die "bad configure"
-	emake || die "compile problem"
-}
-
-src_install() {
-	emake install-nokeys DESTDIR="${D}" || die
-	fperms 600 /etc/ssh/sshd_config
-	dobin contrib/ssh-copy-id
-	newinitd "${FILESDIR}"/sshd.rc6 sshd
-	newconfd "${FILESDIR}"/sshd.confd sshd
-	keepdir /var/empty
-
-	newpamd "${FILESDIR}"/sshd.pam_include.2 sshd
-	if use pam ; then
-		sed -i \
-			-e "/^#UsePAM /s:.*:UsePAM yes:" \
-			-e "/^#PasswordAuthentication /s:.*:PasswordAuthentication no:" \
-			-e "/^#PrintMotd /s:.*:PrintMotd no:" \
-			-e "/^#PrintLastLog /s:.*:PrintLastLog no:" \
-			"${D}"/etc/ssh/sshd_config || die "sed of configuration file failed"
-	fi
-
-	# This instruction is from the HPN webpage,
-	# Used for the server logging functionality
-	if [[ -n ${HPN_PATCH} ]] && use hpn; then
-		keepdir /var/empty/dev
-	fi
-
-	doman contrib/ssh-copy-id.1
-	dodoc ChangeLog CREDITS OVERVIEW README* TODO sshd_config
-
-	diropts -m 0700
-	dodir /etc/skel/.ssh
-}
-
-src_test() {
-	local t tests skipped failed passed shell
-	tests="interop-tests compat-tests"
-	skipped=""
-	shell=$(getent passwd ${UID} | cut -d: -f7)
-	if [[ ${shell} == */nologin ]] || [[ ${shell} == */false ]] ; then
-		elog "Running the full OpenSSH testsuite"
-		elog "requires a usable shell for the 'portage'"
-		elog "user, so we will run a subset only."
-		skipped="${skipped} tests"
-	else
-		tests="${tests} tests"
-	fi
-	for t in ${tests} ; do
-		# Some tests read from stdin ...
-		emake -k -j1 ${t} </dev/null \
-			&& passed="${passed}${t} " \
-			|| failed="${failed}${t} "
-	done
-	einfo "Passed tests: ${passed}"
-	ewarn "Skipped tests: ${skipped}"
-	if [[ -n ${failed} ]] ; then
-		ewarn "Failed tests: ${failed}"
-		die "Some tests failed: ${failed}"
-	else
-		einfo "Failed tests: ${failed}"
-		return 0
-	fi
-}
-
-pkg_postinst() {
-	enewgroup sshd 22
-	enewuser sshd 22 -1 /var/empty sshd
-
-	# help fix broken perms caused by older ebuilds.
-	# can probably cut this after the next stage release.
-	chmod u+x "${ROOT}"/etc/skel/.ssh >& /dev/null
-
-	ewarn "Remember to merge your config files in /etc/ssh/ and then"
-	ewarn "reload sshd: '/etc/init.d/sshd reload'."
-	if use pam ; then
-		echo
-		ewarn "Please be aware users need a valid shell in /etc/passwd"
-		ewarn "in order to be allowed to login."
-	fi
-	if use pkcs11 ; then
-		echo
-		einfo "For PKCS#11 you should also emerge one of the askpass softwares"
-		einfo "Example: net-misc/x11-ssh-askpass"
-	fi
-	# This instruction is from the HPN webpage,
-	# Used for the server logging functionality
-	if [[ -n ${HPN_PATCH} ]] && use hpn; then
-		echo
-		einfo "For the HPN server logging patch, you must ensure that"
-		einfo "your syslog application also listens at /var/empty/dev/log."
-	fi
-}
diff --git a/net-misc/openssh/openssh-5.3_p1.ebuild b/net-misc/openssh/openssh-5.3_p1.ebuild
deleted file mode 100644
index ff70d771f5c9..000000000000
--- a/net-misc/openssh/openssh-5.3_p1.ebuild
+++ /dev/null
@@ -1,253 +0,0 @@
-# Copyright 1999-2009 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/openssh-5.3_p1.ebuild,v 1.2 2009/10/07 18:22:57 vapier Exp $
-
-inherit eutils flag-o-matic multilib autotools pam
-
-# Make it more portable between straight releases
-# and _p? releases.
-PARCH=${P/_/}
-
-#HPN_PATCH="${PARCH}-hpn13v6.diff.gz"
-#LDAP_PATCH="${PARCH/openssh/openssh-lpk}-0.3.11.patch.gz"
-PKCS11_PATCH="${PARCH/3p1/2}pkcs11-0.26.tar.bz2"
-X509_VER="6.2.1" X509_PATCH="${PARCH}+x509-${X509_VER}.diff.gz"
-
-DESCRIPTION="Port of OpenBSD's free SSH release"
-HOMEPAGE="http://www.openssh.org/"
-SRC_URI="mirror://openbsd/OpenSSH/portable/${PARCH}.tar.gz
-	${HPN_PATCH:+hpn? ( http://www.psc.edu/networking/projects/hpn-ssh/${HPN_PATCH} )}
-	${LDAP_PATCH:+ldap? ( mirror://gentoo/${LDAP_PATCH} )}
-	${PKCS11_PATCH:+pkcs11? ( http://alon.barlev.googlepages.com/${PKCS11_PATCH} )}
-	${X509_PATCH:+X509? ( http://roumenpetrov.info/openssh/x509-${X509_VER}/${X509_PATCH} )}"
-
-LICENSE="as-is"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~sparc-fbsd ~x86 ~x86-fbsd"
-IUSE="hpn kerberos ldap libedit pam pkcs11 selinux skey smartcard static tcpd X X509"
-
-RDEPEND="pam? ( virtual/pam )
-	kerberos? ( virtual/krb5 )
-	selinux? ( >=sys-libs/libselinux-1.28 )
-	skey? ( >=sys-auth/skey-1.1.5-r1 )
-	ldap? ( net-nds/openldap )
-	libedit? ( dev-libs/libedit )
-	>=dev-libs/openssl-0.9.6d
-	>=sys-libs/zlib-1.2.3
-	smartcard? ( dev-libs/opensc )
-	pkcs11? ( dev-libs/pkcs11-helper )
-	tcpd? ( >=sys-apps/tcp-wrappers-7.6 )
-	X? ( x11-apps/xauth )
-	userland_GNU? ( sys-apps/shadow )"
-DEPEND="${RDEPEND}
-	dev-util/pkgconfig
-	virtual/os-headers
-	sys-devel/autoconf"
-RDEPEND="${RDEPEND}
-	pam? ( >=sys-auth/pambase-20081028 )"
-PROVIDE="virtual/ssh"
-
-S=${WORKDIR}/${PARCH}
-
-pkg_setup() {
-	# this sucks, but i'd rather have people unable to `emerge -u openssh`
-	# than not be able to log in to their server any more
-	maybe_fail() { [[ -z ${!2} ]] && use ${1} && echo ${1} ; }
-	local fail="
-		$(maybe_fail ldap LDAP_PATCH)
-		$(maybe_fail pkcs11 PKCS11_PATCH)
-		$(maybe_fail X509 X509_PATCH)
-	"
-	fail=$(echo ${fail})
-	if [[ -n ${fail} ]] ; then
-		eerror "Sorry, but this version does not yet support features"
-		eerror "that you requested:	 ${fail}"
-		eerror "Please mask ${PF} for now and check back later:"
-		eerror " # echo '=${CATEGORY}/${PF}' >> /etc/portage/package.mask"
-		die "booooo"
-	fi
-}
-
-src_unpack() {
-	unpack ${PARCH}.tar.gz
-	cd "${S}"
-
-	sed -i \
-		-e '/_PATH_XAUTH/s:/usr/X11R6/bin/xauth:/usr/bin/xauth:' \
-		pathnames.h || die
-
-	if use pkcs11 ; then
-		cd "${WORKDIR}"
-		unpack "${PKCS11_PATCH}"
-		cd "${S}"
-		EPATCH_OPTS="-p1" epatch "${WORKDIR}"/*pkcs11*/{1,2,4}*
-		use X509 && EPATCH_OPTS="-R" epatch "${WORKDIR}"/*pkcs11*/1000_all_log.patch
-	fi
-	use X509 && epatch "${DISTDIR}"/${X509_PATCH} "${FILESDIR}"/${PN}-5.2_p1-x509-hpn-glue.patch
-	use smartcard && epatch "${FILESDIR}"/openssh-3.9_p1-opensc.patch
-	if ! use X509 ; then
-		if [[ -n ${LDAP_PATCH} ]] && use ldap ; then
-			# The patch for bug 210110 64-bit stuff is now included.
-			epatch "${DISTDIR}"/${LDAP_PATCH}
-			epatch "${FILESDIR}"/${PN}-5.2p1-ldap-stdargs.diff #266654
-		fi
-		#epatch "${DISTDIR}"/openssh-5.2p1-gsskex-all-20090726.patch #115553 #216932 #279488
-		#epatch "${FILESDIR}"/${P}-gsskex-fix.patch
-	else
-		use ldap && ewarn "Sorry, X509 and ldap don't get along, disabling ldap"
-	fi
-	epatch "${FILESDIR}"/${PN}-4.7_p1-GSSAPI-dns.patch #165444 integrated into gsskex
-	[[ -n ${HPN_PATCH} ]] && use hpn && epatch "${DISTDIR}"/${HPN_PATCH}
-	epatch "${FILESDIR}"/${PN}-4.7p1-selinux.diff #191665
-	epatch "${FILESDIR}"/${PN}-5.2_p1-autoconf.patch
-
-	# in 5.2p1, the AES-CTR multithreaded variant is temporarily broken, and
-	# causes random hangs when combined with the -f switch of ssh.
-	# To avoid this, we change the internal table to use the non-multithread
-	# version for the meantime.
-	sed -i \
-		-e '/aes...-ctr.*SSH_CIPHER_SSH2/s,evp_aes_ctr_mt,evp_aes_128_ctr,' \
-		cipher.c || die
-
-	sed -i "s:-lcrypto:$(pkg-config --libs openssl):" configure{,.ac} || die
-
-	# Disable PATH reset, trust what portage gives us. bug 254615
-	sed -i -e 's:^PATH=/:#PATH=/:' configure || die
-
-	eautoreconf
-}
-
-static_use_with() {
-	local flag=$1
-	if use static && use ${flag} ; then
-		ewarn "Disabling '${flag}' support because of USE='static'"
-		# rebuild args so that we invert the first one (USE flag)
-		# but otherwise leave everything else working so we can
-		# just leverage use_with
-		shift
-		[[ -z $1 ]] && flag="${flag} ${flag}"
-		set -- !${flag} "$@"
-	fi
-	use_with "$@"
-}
-
-src_compile() {
-	addwrite /dev/ptmx
-	addpredict /etc/skey/skeykeys #skey configure code triggers this
-
-	local myconf=""
-	use static && append-ldflags -static
-
-	econf \
-		--with-ldflags="${LDFLAGS}" \
-		--disable-strip \
-		--sysconfdir=/etc/ssh \
-		--libexecdir=/usr/$(get_libdir)/misc \
-		--datadir=/usr/share/openssh \
-		--with-privsep-path=/var/empty \
-		--with-privsep-user=sshd \
-		--with-md5-passwords \
-		--with-ssl-engine \
-		$(static_use_with pam) \
-		$(static_use_with kerberos kerberos5 /usr) \
-		${LDAP_PATCH:+$(use ldap && use_with ldap)} \
-		$(use_with libedit) \
-		${PKCS11_PATCH:+$(use pkcs11 && static_use_with pkcs11)} \
-		$(use_with selinux) \
-		$(use_with skey) \
-		$(use_with smartcard opensc) \
-		$(use_with tcpd tcp-wrappers) \
-		${myconf} \
-		|| die "bad configure"
-	emake || die "compile problem"
-}
-
-src_install() {
-	emake install-nokeys DESTDIR="${D}" || die
-	fperms 600 /etc/ssh/sshd_config
-	dobin contrib/ssh-copy-id
-	newinitd "${FILESDIR}"/sshd.rc6 sshd
-	newconfd "${FILESDIR}"/sshd.confd sshd
-	keepdir /var/empty
-
-	newpamd "${FILESDIR}"/sshd.pam_include.2 sshd
-	if use pam ; then
-		sed -i \
-			-e "/^#UsePAM /s:.*:UsePAM yes:" \
-			-e "/^#PasswordAuthentication /s:.*:PasswordAuthentication no:" \
-			-e "/^#PrintMotd /s:.*:PrintMotd no:" \
-			-e "/^#PrintLastLog /s:.*:PrintLastLog no:" \
-			"${D}"/etc/ssh/sshd_config || die "sed of configuration file failed"
-	fi
-
-	# This instruction is from the HPN webpage,
-	# Used for the server logging functionality
-	if [[ -n ${HPN_PATCH} ]] && use hpn; then
-		keepdir /var/empty/dev
-	fi
-
-	doman contrib/ssh-copy-id.1
-	dodoc ChangeLog CREDITS OVERVIEW README* TODO sshd_config
-
-	diropts -m 0700
-	dodir /etc/skel/.ssh
-}
-
-src_test() {
-	local t tests skipped failed passed shell
-	tests="interop-tests compat-tests"
-	skipped=""
-	shell=$(getent passwd ${UID} | cut -d: -f7)
-	if [[ ${shell} == */nologin ]] || [[ ${shell} == */false ]] ; then
-		elog "Running the full OpenSSH testsuite"
-		elog "requires a usable shell for the 'portage'"
-		elog "user, so we will run a subset only."
-		skipped="${skipped} tests"
-	else
-		tests="${tests} tests"
-	fi
-	for t in ${tests} ; do
-		# Some tests read from stdin ...
-		emake -k -j1 ${t} </dev/null \
-			&& passed="${passed}${t} " \
-			|| failed="${failed}${t} "
-	done
-	einfo "Passed tests: ${passed}"
-	ewarn "Skipped tests: ${skipped}"
-	if [[ -n ${failed} ]] ; then
-		ewarn "Failed tests: ${failed}"
-		die "Some tests failed: ${failed}"
-	else
-		einfo "Failed tests: ${failed}"
-		return 0
-	fi
-}
-
-pkg_postinst() {
-	enewgroup sshd 22
-	enewuser sshd 22 -1 /var/empty sshd
-
-	# help fix broken perms caused by older ebuilds.
-	# can probably cut this after the next stage release.
-	chmod u+x "${ROOT}"/etc/skel/.ssh >& /dev/null
-
-	ewarn "Remember to merge your config files in /etc/ssh/ and then"
-	ewarn "reload sshd: '/etc/init.d/sshd reload'."
-	if use pam ; then
-		echo
-		ewarn "Please be aware users need a valid shell in /etc/passwd"
-		ewarn "in order to be allowed to login."
-	fi
-	if use pkcs11 ; then
-		echo
-		einfo "For PKCS#11 you should also emerge one of the askpass softwares"
-		einfo "Example: net-misc/x11-ssh-askpass"
-	fi
-	# This instruction is from the HPN webpage,
-	# Used for the server logging functionality
-	if [[ -n ${HPN_PATCH} ]] && use hpn; then
-		echo
-		einfo "For the HPN server logging patch, you must ensure that"
-		einfo "your syslog application also listens at /var/empty/dev/log."
-	fi
-}