Punt an old version and a broken version

(Portage version: 2.1.1_pre4-r1)

3 files changed, 0 insertions, 1242 deletions

diff --git a/sys-apps/baselayout/Manifest b/sys-apps/baselayout/Manifest
index 6ade5480ffc4..a320243615a7 100644
--- a/sys-apps/baselayout/Manifest
+++ b/sys-apps/baselayout/Manifest
@@ -46,17 +46,11 @@ AUX baselayout-1.11.15-halt-sort.patch 758 RMD160 282a645738a22098242b56d3f1d393
 MD5 cddb3cf64411b67dffe4cdd37bd2b82e files/baselayout-1.11.15-halt-sort.patch 758
 RMD160 282a645738a22098242b56d3f1d39321865f6b49 files/baselayout-1.11.15-halt-sort.patch 758
 SHA256 496dd355956c960be8a4db1021c3ee76a9250346e0e83f2470974de3859a753e files/baselayout-1.11.15-halt-sort.patch 758
-AUX baselayout-1.12.0-svn-2046.patch 4083 RMD160 439aa5dbbd2c4f3bb26a88c7cba11b845a3867ff SHA1 6a53d1956a536ac090236f04ef00794102f8c68b SHA256 ded28654f40a005c9be76430a96407385537d68e4e3005fd37db2e1b7272a8e9
-MD5 9e958077b17c7869d6b2ddf738ca46ab files/baselayout-1.12.0-svn-2046.patch 4083
-RMD160 439aa5dbbd2c4f3bb26a88c7cba11b845a3867ff files/baselayout-1.12.0-svn-2046.patch 4083
-SHA256 ded28654f40a005c9be76430a96407385537d68e4e3005fd37db2e1b7272a8e9 files/baselayout-1.12.0-svn-2046.patch 4083
 AUX copyright 2099 RMD160 43e295598125f39e375a1fcee6e642e37c8b8bd8 SHA1 3d5da783cc637392429ba2f63d321873fa1526ee SHA256 38db4636f65ce40ea505a6337138b041ac6be5998982193d16b1fbdeebb2bacd
 MD5 7c0cd50e4ac1dc062f5e6ab578e95659 files/copyright 2099
 RMD160 43e295598125f39e375a1fcee6e642e37c8b8bd8 files/copyright 2099
 SHA256 38db4636f65ce40ea505a6337138b041ac6be5998982193d16b1fbdeebb2bacd files/copyright 2099
-DIST baselayout-1.12.0.tar.bz2 213959 RMD160 0f89150fa793547d65fd26c9975bf709d6dfb571 SHA256 e4e004f1bc5b535a7d441d21f730b7beedf0e7487f6b3fbb7cbba35674b487aa
 DIST baselayout-1.12.1.tar.bz2 217878 RMD160 bf29b30435c1a82f693472f2b011d6bf74b9194c SHA1 63762c1e6e2afbda0e1446472d2f27fff753f22a SHA256 63bb66086aab5bd94068dda7b571f9dbb59cf0cbbeb563b418780690614cb75c
-DIST baselayout-1.12.2.tar.bz2 190674 RMD160 8be5fb4525de7b624c52fbe043b9426b9335c259 SHA1 e69eed14f10720aee64883302e0d06a009a44873 SHA256 7404769ee1ace2b86214c90b846951e386811a843ca8d569f785ad2e7b602e33
 DIST baselayout-1.12.3.tar.bz2 190492 RMD160 5a3c7c38718fce3030beae713c5bce4d53105611 SHA1 317b8c49c7697cdd95f1a3ccfe1bf9afb8571270 SHA256 a1475f37f903f075e49ba0c97514c2888d4baebb1558436f7bcf30833da2ea44
 DIST rc-scripts-1.6.13.tar.bz2 156148 RMD160 c267e0862ffb0af4e7b016332e962ad3fb54723e SHA256 89f924fffbe4b9f84970a2fa559262d24714ee5c15c3d3bf6ebd6d95e25484c0
 DIST rc-scripts-1.6.14.tar.bz2 159580 RMD160 564997e6d116ce9d24fd5dcdb885504bce14809e SHA1 428f5971116b1c8d6465e6b826c5cc89621d84db SHA256 d269f2e7749e4034adc5d87bb618901348f6869939a40dba79ba763ea76633ee
@@ -73,18 +67,10 @@ EBUILD baselayout-1.11.15-r3.ebuild 18814 RMD160 3477a96752088ec670ba87c8cc5a825
 MD5 c13ac4da7c024396714a0f52c15bcb58 baselayout-1.11.15-r3.ebuild 18814
 RMD160 3477a96752088ec670ba87c8cc5a825e504374a9 baselayout-1.11.15-r3.ebuild 18814
 SHA256 6568e5b5762128fdfd353dd359581cf6f7aafc60e5ffb2194a675df2aeeb6fda baselayout-1.11.15-r3.ebuild 18814
-EBUILD baselayout-1.12.0-r1.ebuild 19461 RMD160 69f3cb451c18d1770cbe5e9ae53e534e8ff84608 SHA1 73332c002fc01016690fdbf30691d424bd9184bb SHA256 609d57d5177f02298363a812c5a6d49682e051845adbfb7ad996b459f04aa897
-MD5 10b7ebc19e7f079d07bb6bfdbacd39ac baselayout-1.12.0-r1.ebuild 19461
-RMD160 69f3cb451c18d1770cbe5e9ae53e534e8ff84608 baselayout-1.12.0-r1.ebuild 19461
-SHA256 609d57d5177f02298363a812c5a6d49682e051845adbfb7ad996b459f04aa897 baselayout-1.12.0-r1.ebuild 19461
 EBUILD baselayout-1.12.1.ebuild 19415 RMD160 e12d0150231dfe38fec05c5316cb6b9637bbe9d9 SHA1 ea51fb665e338ad8a4582b7b410e0c6b64a0969f SHA256 9422ea78b2db6fe777ab452915fc6cc76fa9137c7e2d0efb26725756c8773845
 MD5 d7f68b6d2164b7ebfa5e25d43543d66d baselayout-1.12.1.ebuild 19415
 RMD160 e12d0150231dfe38fec05c5316cb6b9637bbe9d9 baselayout-1.12.1.ebuild 19415
 SHA256 9422ea78b2db6fe777ab452915fc6cc76fa9137c7e2d0efb26725756c8773845 baselayout-1.12.1.ebuild 19415
-EBUILD baselayout-1.12.2.ebuild 19415 RMD160 d01ce008af3637a8b8b8480da82483847e1cd756 SHA1 bf224dc7227a30725db51ef4c7bdfce5c9f15740 SHA256 1857e702a6d30719d0f25bba2b2b9bd7900a922a55aea27473fd55ee58d75c38
-MD5 e805dd8e65590560b4044966d0c454de baselayout-1.12.2.ebuild 19415
-RMD160 d01ce008af3637a8b8b8480da82483847e1cd756 baselayout-1.12.2.ebuild 19415
-SHA256 1857e702a6d30719d0f25bba2b2b9bd7900a922a55aea27473fd55ee58d75c38 baselayout-1.12.2.ebuild 19415
 EBUILD baselayout-1.12.3.ebuild 19415 RMD160 39e8bf5c555805793b880907fd68ae711c74ac3b SHA1 5998a502aeec65e11b5dc7ac006aac4018a74fb6 SHA256 ec12ba5118b4d7fd2b2ae43182692a32b43bcffd991d5173e585f0dabc7c8609
 MD5 2caa7ecc1b024681cc26f3643956ef29 baselayout-1.12.3.ebuild 19415
 RMD160 39e8bf5c555805793b880907fd68ae711c74ac3b baselayout-1.12.3.ebuild 19415
@@ -106,15 +92,9 @@ SHA256 939da19d06f033b18784c7ab4a9d168d9b68caaf4cdbafde33ae754a10af754d files/di
 MD5 45d5d54f514daeb8d7eedb2a553101b0 files/digest-baselayout-1.11.15-r3 256
 RMD160 5e19a5d090c498d3b79d59e869a95a7a05cfe562 files/digest-baselayout-1.11.15-r3 256
 SHA256 634668e30943316fee0925f0cda440d80319cb9072270573bcbbdbac5986b40b files/digest-baselayout-1.11.15-r3 256
-MD5 74285a147caeebbe39f57ca951c58797 files/digest-baselayout-1.12.0-r1 256
-RMD160 3a831daa0ea9326bf2c7249ac84c287f016038c5 files/digest-baselayout-1.12.0-r1 256
-SHA256 23efc124a5f53b4dd13a3d5509fe74ef35d40d59cb7ddbb51632c37914448178 files/digest-baselayout-1.12.0-r1 256
 MD5 07ee7b9e0871a145f53ece8e35976fa7 files/digest-baselayout-1.12.1 256
 RMD160 57b2f3aa83bfe62da844ddd0fa7f69bbd040032d files/digest-baselayout-1.12.1 256
 SHA256 3fc5f9d5aa89bb49ac203fbbb627c0c710a56bb63bb9e639087ab8af700da4f0 files/digest-baselayout-1.12.1 256
-MD5 9f5fd585978976737b7c2479671d5dac files/digest-baselayout-1.12.2 256
-RMD160 3dc80b345ac5c0d19f17d503ea2689c0e9aeaba9 files/digest-baselayout-1.12.2 256
-SHA256 841463bfb5f555f04ec311bd1aaa7276a84c9089c3fee49b98176b15488aacb2 files/digest-baselayout-1.12.2 256
 MD5 89c348b40ab24d5eff92d668dfac4b39 files/digest-baselayout-1.12.3 256
 RMD160 27cd0ef20f8c47b69eb1e4e4dbc6d1b2832968c3 files/digest-baselayout-1.12.3 256
 SHA256 d97d09494b9ec4945316d73f8bbf474b94b36c2adcfcc6c6e636d672f0aef67c files/digest-baselayout-1.12.3 256
diff --git a/sys-apps/baselayout/baselayout-1.12.0-r1.ebuild b/sys-apps/baselayout/baselayout-1.12.0-r1.ebuild
deleted file mode 100644
index b0682e851af3..000000000000
--- a/sys-apps/baselayout/baselayout-1.12.0-r1.ebuild
+++ /dev/null
@@ -1,612 +0,0 @@
-# Copyright 1999-2006 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/baselayout/baselayout-1.12.0-r1.ebuild,v 1.2 2006/06/10 17:02:37 uberlord Exp $
-
-inherit flag-o-matic eutils toolchain-funcs multilib
-
-DESCRIPTION="Filesystem baselayout and init scripts"
-HOMEPAGE="http://www.gentoo.org/"
-SRC_URI="mirror://gentoo/${P}.tar.bz2
-	http://dev.gentoo.org/~uberlord/baselayout/${P}.tar.bz2
-	http://dev.gentoo.org/~azarah/baselayout/${P}.tar.bz2
-	http://dev.gentoo.org/~vapier/dist/${P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="bootstrap build static unicode"
-
-# This version of baselayout needs gawk in /bin, but as we do not have
-# a c++ compiler during bootstrap, we cannot depend on it if "bootstrap"
-# or "build" are in USE.
-RDEPEND=">=sys-apps/sysvinit-2.86-r3
-	!build? ( !bootstrap? (
-		>=sys-libs/readline-5.0-r1
-		>=app-shells/bash-3.1_p7
-		>=sys-apps/coreutils-5.2.1
-	) )"
-DEPEND="virtual/os-headers
-	>=sys-apps/portage-2.0.51"
-PROVIDE="virtual/baselayout"
-
-src_unpack() {
-	unpack ${A}
-	cd "${S}"
-
-	epatch "${FILESDIR}/${P}"-svn-2046.patch
-
-	# Setup unicode defaults for silly unicode users
-	if use unicode ; then
-		sed -i -e '/^UNICODE=/s:no:yes:' etc/rc.conf
-	fi
-
-	# Tweak arch-specific details
-	cd "${S}"
-
-	case $(tc-arch) in
-	sparc)
-		sed -i -e '/^KEYMAP=/s:us:sunkeymap:' etc/conf.d/keymaps || die
-		# Disable interactive boot on sparc due to stty calls, #104067
-		sed -i -e '/^RC_INTERACTIVE=/s:yes:no:' etc/conf.d/rc || die
-		;;
-	esac
-
-	# Use correct path to filefuncs.so on multilib systems
-	sed -i -e "s:/lib/rcscripts:/$(get_libdir)/rcscripts:" \
-		${S}/src/awk/{cachedepends,genenviron}.awk || die
-}
-
-src_compile() {
-	local libdir="lib"
-
-	use static && append-ldflags -static
-
-	[[ ${SYMLINK_LIB} == "yes" ]] && libdir=$(get_abi_LIBDIR "${DEFAULT_ABI}")
-
-	make -C "${S}"/src \
-		CC="$(tc-getCC)" \
-		LD="$(tc-getCC) ${LDFLAGS}" \
-		CFLAGS="${CFLAGS}" \
-		LIBDIR="${libdir}" || die
-}
-
-# ${PATH} should include where to get MAKEDEV when calling this
-# function
-create_dev_nodes() {
-	case $(tc-arch) in
-		# amd64 must use generic-i386 because amd64/x86_64 does not have
-		# a generic option at this time, and the default 'generic' ends
-		# up erroring out, because MAKEDEV internally doesn't know what
-		# to use
-		arm*)    suffix=-arm ;;
-		alpha)   suffix=-alpha ;;
-		amd64)   suffix=-i386 ;;
-		hppa)    suffix=-hppa ;;
-		ia64)    suffix=-ia64 ;;
-		m68k)    suffix=-m68k ;;
-		mips*)   suffix=-mips ;;
-		ppc*)    suffix=-powerpc ;;
-		s390*)   suffix=-s390 ;;
-		sh*)     suffix=-sh ;;
-		sparc*)  suffix=-sparc ;;
-		x86)     suffix=-i386 ;;
-	esac
-
-	einfo "Using generic${suffix} to make $(tc-arch) device nodes..."
-	MAKEDEV generic${suffix}
-	MAKEDEV sg scd rtc hde hdf hdg hdh input audio video
-}
-
-# This is a temporary workaround until bug 9849 is completely solved
-# in portage.  We need to create the directories so they're available
-# during src_install, but when src_install is finished, call unkdir
-# to remove any empty directories instead of leaving them around.
-kdir() {
-	typeset -a args
-	typeset d
-
-	# Create the directories for the remainder of src_install, and
-	# remember how to create the directories later.
-	for d in "$@"; do
-		if [[ $d == /* ]]; then
-			install -d "${args[@]}" "${D}/${d}"
-			cat >> "${D}/usr/share/baselayout/mkdirs.sh" <<EOF
-if [ ! -d "\${ROOT}/${d}" ] ; then \\
-	install -d ${args[@]} "\${ROOT}/${d}" 2>/dev/null \\
-		|| ewarn "  can't create ${d}"
-	touch "\${ROOT}/${d}/.keep" 2>/dev/null \\
-		|| ewarn "  can't create ${d}/.keep"
-fi
-EOF
-		else
-			args=("${args[@]}" "${d}")
-		fi
-	done
-}
-
-# Continued from kdir above...  This function removes any empty
-# directories as a temporary workaround for bug 9849.  The directories
-# (and .keep files) are re-created in pkg_postinst, which means they
-# aren't listed in CONTENTS, unfortunately.
-unkdir() {
-	einfo "Running unkdir to workaround bug 9849"
-	find "${D}" -depth -type d -exec rmdir {} \; 2>/dev/null
-	if [[ $? == 127 ]]; then
-		ewarn "Problem running unkdir: find command not found"
-	fi
-}
-
-# Same as kdir above, but for symlinks #103618
-ksym() {
-	echo "[[ ! -e ${ROOT}/$2 ]] && { ln -s '$1' '${ROOT}/$2' &> /dev/null || ewarn '  unable to symlink $2 to $1' ; }" \
-		>> "${D}"/usr/share/baselayout/mklinks.sh
-}
-
-src_install() {
-	local dir libdirs libdirs_env rcscripts_dir
-
-	# This directory is to stash away things that will be used in
-	# pkg_postinst; it's needed first for kdir to function
-	dodir /usr/share/baselayout
-
-	# Jeremy Huddleston <eradicator@gentoo.org>
-	# For multilib, we want to make sure that all our multilibdirs exist
-	# and make lib even if it's not listed as one (like on amd64/ppc64
-	# which sometimes has lib32/lib64 instead of lib/lib64).
-	# lib should NOT be a symlink to one of the other libdirs.
-	# Old systems with symlinks won't be affected by this change, as the
-	# symlinks already exist and won't get removed, but new systems will
-	# be setup properly.
-	#
-	# I'll be making a script to convert existing systems from symlink to
-	# nosymlink and putting it in /usr/portage/scripts.
-	libdirs=$(get_all_libdirs)
-	: ${libdirs:=lib}	# it isn't that we don't trust multilib.eclass...
-
-	# This should be /lib/rcscripts, but we have to support old profiles too.
-	if [[ ${SYMLINK_LIB} == "yes" ]]; then
-		rcscripts_dir="/$(get_abi_LIBDIR ${DEFAULT_ABI})/rcscripts"
-	else
-		rcscripts_dir="/lib/rcscripts"
-	fi
-
-	einfo "Creating directories..."
-	kdir /usr
-	kdir /usr/local
-	kdir /boot
-	kdir /dev
-	kdir /dev/pts
-	kdir /dev/shm
-	kdir /etc/conf.d
-	kdir /etc/cron.daily
-	kdir /etc/cron.hourly
-	kdir /etc/cron.monthly
-	kdir /etc/cron.weekly
-	kdir /etc/env.d
-	dodir /etc/init.d			# .keep file might mess up init.d stuff
-	kdir /etc/modules.autoload.d
-	kdir /etc/modules.d
-	kdir /etc/opt
-	kdir /home
-	kdir ${rcscripts_dir}
-	kdir ${rcscripts_dir}/awk
-	kdir ${rcscripts_dir}/sh
-	kdir ${rcscripts_dir}/net
-	# Only install /mnt stuff at bootstrap time #88835 / #90022
-	if use build ; then
-		kdir /mnt
-		kdir -m 0700 /mnt/cdrom
-		kdir -m 0700 /mnt/floppy
-	fi
-	kdir /opt
-	kdir -o root -g uucp -m0775 /var/lock
-	kdir /proc
-	kdir -m 0700 /root
-	kdir /sbin
-	kdir /sys	# for 2.6 kernels
-	kdir /usr/bin
-	kdir /usr/include
-	kdir /usr/include/asm
-	kdir /usr/include/linux
-	kdir /usr/local/bin
-	kdir /usr/local/games
-	kdir /usr/local/sbin
-	kdir /usr/local/share
-	kdir /usr/local/share/doc
-	kdir /usr/local/share/man
-	kdir /usr/local/src
-	kdir ${PORTDIR}
-	kdir /usr/sbin
-	kdir /usr/share/doc
-	kdir /usr/share/info
-	kdir /usr/share/man
-	kdir /usr/share/misc
-	kdir /usr/src
-	kdir -m 1777 /tmp
-	kdir /var
-	dodir /var/db/pkg			# .keep file messes up Portage
-	kdir /var/lib/misc
-	kdir /var/lock/subsys
-	kdir /var/log/news
-	kdir /var/run
-	kdir /var/spool
-	kdir /var/state
-	kdir -m 1777 /var/tmp
-
-	for dir in ${libdirs}; do
-		libdirs_env=${libdirs_env:+$libdirs_env:}/${dir}:/usr/${dir}:/usr/local/${dir}
-		[[ ${dir} == "lib" && ${SYMLINK_LIB} == "yes" ]] && continue
-		kdir /${dir}
-		kdir /usr/${dir}
-		kdir /usr/local/${dir}
-	done
-
-	# Ugly compatibility with stupid ebuilds and old profiles symlinks
-	if [[ ${SYMLINK_LIB} == "yes" ]] ; then
-		rm -r "${D}"/{lib,usr/lib,usr/local/lib} &> /dev/null
-		ksym $(get_abi_LIBDIR ${DEFAULT_ABI}) /lib
-		ksym $(get_abi_LIBDIR ${DEFAULT_ABI}) /usr/lib
-		ksym $(get_abi_LIBDIR ${DEFAULT_ABI}) /usr/local/lib
-	fi
-
-	kdir /$(get_libdir)/dev-state
-	kdir /$(get_libdir)/udev-state
-
-	# FHS compatibility symlinks stuff
-	ksym /var/tmp /usr/tmp
-	ksym share/man /usr/local/man
-
-	#
-	# Setup files in /etc
-	#
-	insopts -m0644
-	insinto /etc
-	doins -r "${S}"/etc/*
-	fperms 0640 /etc/sysctl.conf
-
-	# Install some files to /usr/share/baselayout instead of /etc to keep from
-	# (1) overwriting the user's settings, (2) screwing things up when
-	# attempting to merge files, (3) accidentally packaging up personal files
-	# with quickpkg
-	fperms 0600 /etc/shadow
-	mv "${D}"/etc/{passwd,shadow,group,fstab,hosts,issue.devfix} "${D}"/usr/share/baselayout
-
-	# doinitd doesnt respect symlinks
-	dodir /etc/init.d
-	cp -P "${S}"/init.d/* "${D}"/etc/init.d/ || die "doinitd"
-	#doinitd "${S}"/init.d/* || die "doinitd"
-	doconfd "${S}"/etc/conf.d/* || die "doconfd"
-	doenvd "${S}"/etc/env.d/* || die "doenvd"
-	insinto /etc/modules.autoload.d
-	doins "${S}"/etc/modules.autoload.d/*
-	insinto /etc/modules.d
-	doins "${S}"/etc/modules.d/*
-
-	# Special-case uglyness... For people updating from lib32 -> lib amd64
-	# profiles, keep lib32 in the search path while it's around
-	if has_multilib_profile && [ -d /lib32 -o -d /usr/lib32 ] && ! hasq lib32 ${libdirs}; then
-		libdirs_env="${libdirs_env}:/lib32:/usr/lib32:/usr/local/lib32"
-	fi
-
-	# List all the multilib libdirs in /etc/env/04multilib (only if they're
-	# actually different from the normal
-	if has_multilib_profile || [[ $(get_libdir) != "lib" || -n ${CONF_MULTILIBDIR} ]]; then
-		echo "LDPATH=\"${libdirs_env}\"" > ${D}/etc/env.d/04multilib
-	fi
-
-	# As of baselayout-1.10-1-r1, sysvinit is its own package again, and
-	# provides the inittab itself
-	rm -f "${D}"/etc/inittab
-
-	# Stash the rc-lists for use during pkg_postinst
-	cp -r "${S}"/rc-lists "${D}"/usr/share/baselayout
-
-	# rc-scripts version for testing of features that *should* be present
-	echo "Gentoo Base System version ${PV}" > ${D}/etc/gentoo-release
-
-	#
-	# Setup files related to /dev
-	#
-	into /
-	dosbin "${S}"/sbin/MAKEDEV
-	dosym ../../sbin/MAKEDEV /usr/sbin/MAKEDEV
-	dosym ../sbin/MAKEDEV /dev/MAKEDEV
-
-	#
-	# Setup files in /bin
-	#
-	cd "${S}"/bin
-	dobin rc-status
-
-	#
-	# Setup files in /sbin
-	#
-	cd "${S}"/sbin
-	into /
-	dosbin rc rc-update
-	# Need this in /sbin, as it could be run before
-	# /usr is mounted.
-	dosbin modules-update
-	# Compat symlinks until I can get things synced.
-	dosym modules-update /sbin/update-modules
-	dosym ../../sbin/modules-update /usr/sbin/update-modules
-	# These moved from /etc/init.d/ to /sbin to help newb systems
-	# from breaking
-	dosbin runscript.sh functions.sh
-
-	# Compat symlinks between /etc/init.d and /sbin
-	# (some stuff have hardcoded paths)
-	dosym ../../sbin/depscan.sh /etc/init.d/depscan.sh
-	dosym ../../sbin/runscript.sh /etc/init.d/runscript.sh
-	dosym ../../sbin/functions.sh /etc/init.d/functions.sh
-
-	#
-	# Setup files in /lib/rcscripts
-	# These are support files for other things in baselayout that needn't be
-	# under CONFIG_PROTECTed /etc
-	#
-	cd "${S}"/sbin
-	exeinto ${rcscripts_dir}/sh
-	doexe rc-services.sh rc-daemon.sh rc-help.sh
-
-	# We can only install new, fast awk versions of scripts
-	# if 'build' or 'bootstrap' is not in USE.  This will
-	# change if we have sys-apps/gawk-3.1.1-r1 or later in
-	# the build image ...
-	if ! use build; then
-		# This is for new depscan.sh and env-update.sh
-		# written in awk
-		cd "${S}"/sbin
-		into /
-		dosbin depscan.sh
-		dosbin env-update.sh
-		insinto ${rcscripts_dir}/awk
-		doins "${S}"/src/awk/*.awk
-	fi
-
-	# Original design had these in /etc/net.modules.d but that is too
-	# problematic with CONFIG_PROTECT
-	dodir ${rcscripts_dir}
-	cp -pPR "${S}"/lib/rcscripts/net ${D}${rcscripts_dir}
-	chown -R root:0 ${D}${rcscripts_dir}
-
-	#
-	# Install baselayout documentation
-	#
-	if ! use build ; then
-		doman "${S}"/man/*.*
-		docinto /
-		dodoc ${FILESDIR}/copyright
-		dodoc "${S}"/ChangeLog
-	fi
-
-	#
-	# Install baselayout utilities
-	#
-	cd "${S}"/src
-	make DESTDIR="${D}" LIBDIR="$(get_libdir)" install || die
-
-	# Hack to fix bug 9849, continued in pkg_postinst
-	unkdir
-}
-
-# Support function for remapping old wireless dns vars
-remap_dns_vars() {
-	local f="$1"
-
-	if [[ -f ${ROOT}/etc/conf.d/${f} ]]; then
-		sed -e 's/\<domain_/dns_domain_/g' \
-			-e 's/\<mac_domain_/mac_dns_domain_/g' \
-			-e 's/\<nameservers_/dns_servers_/g' \
-			-e 's/\<mac_nameservers_/mac_dns_servers_/g' \
-			-e 's/\<searchdomains_/dns_search_domains_/g' \
-			-e 's/\<mac_searchdomains_/mac_dns_search_domains_/g' \
-			${ROOT}/etc/conf.d/${f} > ${IMAGE}/etc/conf.d/${f}
-	fi
-}
-
-pkg_preinst() {
-	if [[ -f ${ROOT}/etc/modules.autoload && \
-			! -d ${ROOT}/etc/modules.autoload.d ]]; then
-		mkdir -p ${ROOT}/etc/modules.autoload.d
-		mv -f ${ROOT}/etc/modules.autoload \
-			${ROOT}/etc/modules.autoload.d/kernel-2.4
-		ln -snf modules.autoload.d/kernel-2.4 ${ROOT}/etc/modules.autoload
-	fi
-
-	# Change some vars introduced in baselayout-1.11.0 before we go stable
-	# The new names make more sense and allow nis_domain
-	# for use in baselayout-1.12.0
-	remap_dns_vars net
-	remap_dns_vars wireless
-}
-
-pkg_postinst() {
-	local x y
-
-	# Reincarnate dirs from kdir/unkdir (hack for bug 9849)
-	einfo "Creating directories and .keep files."
-	einfo "Some of these might fail if they're read-only mounted"
-	einfo "filesystems, for example /dev or /proc.  That's okay!"
-	source "${ROOT}"/usr/share/baselayout/mkdirs.sh
-	source "${ROOT}"/usr/share/baselayout/mklinks.sh
-	echo
-
-	# This could be done in src_install, which would have the benefit of
-	# (1) devices.tar.bz2 would show up in CONTENTS
-	# (2) binary installations would be faster... just untar the devices tarball
-	#     instead of needing to run MAKEDEV
-	# However the most common cases are that people are either updating
-	# baselayout or installing from scratch.  In the installation case, it's no
-	# different to have here instead of src_install.  In the update case, we
-	# save a couple minutes time by refraining from building the unnecessary
-	# tarball.
-	if [[ ! -f "${ROOT}/lib/udev-state/devices.tar.bz2" ]]; then
-		# Create a directory in which to work
-		x=$(emktemp -d ${ROOT}/tmp/devnodes.XXXXXXXXX) \
-			&& cd "${x}" || die 'mktemp failed'
-
-		# Create temp device nodes
-		echo
-		einfo "Making device node tarball (this could take a couple minutes)"
-		PATH=${ROOT}/sbin:${PATH} create_dev_nodes
-
-		# Now create tarball that can also be used for udev.
-		# Need GNU tar for -j so call it by absolute path.
-		/bin/tar --one-file-system -cjpf "${ROOT}/lib/udev-state/devices.tar.bz2" *
-		rm -r *
-		cd ..
-		rmdir "${x}"
-	fi
-
-	# We don't want to create devices if this is not a bootstrap and devfs
-	# is used, as this was the cause for all the devfs problems we had
-	if use build || use bootstrap; then
-		if [[ ! -e "${ROOT}/dev/.devfsd" && ! -e "${ROOT}/dev/.udev" ]]; then
-			einfo "Populating /dev with device nodes..."
-			cd ${ROOT}/dev || die
-			tar xjpf "${ROOT}/lib/udev-state/devices.tar.bz2" || die
-		fi
-	fi
-
-	# Create /boot/boot symlink in pkg_postinst because sometimes
-	# /boot is a FAT filesystem.  When that is the case, then the
-	# symlink will fail.  Consequently, if we create it in
-	# src_install, then merge will fail.  AFAIK there is no point to
-	# this symlink except for misconfigured grubs.  See bug 50108
-	# (05 May 2004 agriffis)
-	ln -sn . "${ROOT}"/boot/boot 2>/dev/null
-
-	# Set up default runlevel symlinks
-	# This used to be done in src_install but required knowledge of ${ROOT},
-	# which meant that it was effectively broken for binary installs.
-	if [[ -z $(/bin/ls "${ROOT}"/etc/runlevels 2>/dev/null) ]]; then
-		for x in boot default nonetwork single; do
-			einfo "Creating default runlevel symlinks for ${x}"
-			mkdir -p "${ROOT}"/etc/runlevels/${x}
-			for y in $(<"${ROOT}"/usr/share/baselayout/rc-lists/${x}); do
-				if [[ ! -e ${ROOT}/etc/init.d/${y} ]]; then
-					ewarn "init.d/${y} not found -- ignoring"
-				else
-					ln -sfn /etc/init.d/${y} \
-						"${ROOT}"/etc/runlevels/${x}/${y}
-				fi
-			done
-		done
-	fi
-
-	# Create /etc/hosts in pkg_postinst so we don't overwrite an
-	# existing file during bootstrap
-	if [[ ! -e ${ROOT}/etc/hosts ]]; then
-		cp ${ROOT}/usr/share/baselayout/hosts ${ROOT}/etc
-	fi
-
-	# Touching /etc/passwd and /etc/shadow after install can be fatal, as many
-	# new users do not update them properly...  see src_install() for why they
-	# are in /usr/share/baselayout/
-	for x in passwd shadow group fstab ; do
-		if [[ -e ${ROOT}/etc/${x} ]] ; then
-			touch "${ROOT}/etc/${x}"
-		else
-			cp "${ROOT}/usr/share/baselayout/${x}" "${ROOT}/etc/${x}"
-		fi
-	done
-
-	# Under what circumstances would mtab be a symlink?  It would be
-	# nice if there were an explanatory comment here
-	if [[ -L ${ROOT}/etc/mtab ]]; then
-		rm -f "${ROOT}/etc/mtab"
-		if [[ ${ROOT} == / ]]; then
-			cp /proc/mounts "${ROOT}/etc/mtab"
-		else
-			touch "${ROOT}/etc/mtab"
-		fi
-	fi
-
-	# We should only install empty files if these files don't already exist.
-	[[ -e ${ROOT}/var/log/lastlog ]] || \
-		touch "${ROOT}/var/log/lastlog"
-	[[ -e ${ROOT}/var/run/utmp ]] || \
-		install -m 0664 -g utmp /dev/null "${ROOT}/var/run/utmp"
-	[[ -e ${ROOT}/var/log/wtmp ]] || \
-		install -m 0664 -g utmp /dev/null "${ROOT}/var/log/wtmp"
-
-	# Reload init to fix unmounting problems of / on next reboot.
-	# This is really needed, as without the new version of init cause init
-	# not to quit properly on reboot, and causes a fsck of / on next reboot.
-	if [[ ${ROOT} == / ]] && ! use build && ! use bootstrap; then
-		# Regenerate init.d dependency tree
-		/sbin/depscan.sh --update &>/dev/null
-
-		# Regenerate /etc/modules.conf, else it will fail at next boot
-		einfo "Updating module dependencies..."
-		/sbin/modules-update force &>/dev/null
-	else
-		rm -f ${ROOT}/etc/modules.conf
-	fi
-
-	# This is also written in src_install (so it's in CONTENTS), but
-	# write it here so that the new version is immediately in the file
-	# (without waiting for the user to do etc-update)
-	rm -f ${ROOT}/etc/._cfg????_gentoo-release
-	echo "Gentoo Base System version ${PV}" > ${ROOT}/etc/gentoo-release
-
-	echo
-	einfo "Please be sure to update all pending '._cfg*' files in /etc,"
-	einfo "else things might break at your next reboot!  You can use 'etc-update'"
-	einfo "to accomplish this:"
-	einfo
-	einfo "  # etc-update"
-	echo
-
-	for f in /etc/init.d/net.eth*; do
-		[[ -L ${f} ]] && continue
-		echo
-		einfo "WARNING: You have older net.eth* files in ${ROOT}/etc/init.d/"
-		einfo "They need to be converted to symlinks to net.lo.  If you haven't"
-		einfo "made personal changes to those files, you can update with the"
-		einfo "following command:"
-		einfo
-		einfo "  # /bin/ls /etc/init.d/net.eth* | xargs -n1 ln -sfvn net.lo"
-		echo
-		break
-	done
-
-	if sed -e 's/#.*//' ${ROOT}/etc/conf.d/{net,wireless} 2>/dev/null \
-		| egrep -q '\<(domain|nameservers|searchdomains)_' ; then
-			echo
-			ewarn "You have depreciated variables in ${ROOT}/etc/conf.d/net"
-			ewarn "or ${ROOT}/etc/conf.d/wireless"
-			ewarn
-			ewarn "domain_* -> dns_domain_*"
-			ewarn "nameservers_* -> dns_servers_*"
-			ewarn "searchdomains_* -> dns_search_domains_*"
-			ewarn
-			ewarn "They have been converted for you - ensure that you"
-			ewarn "update them via 'etc-update'"
-			echo
-	fi
-
-	if sed -e 's/#.*//' ${ROOT}/etc/conf.d/net 2>/dev/null \
-		| egrep -q '\<(ifconfig|aliases|broadcasts|netmasks|inet6|ipaddr|iproute)_'; then
-			echo
-			ewarn "You are using deprecated variables in ${ROOT}/etc/conf.d/net"
-			ewarn
-			ewarn "You are advised to review the new configuration variables as"
-			ewarn "found in ${ROOT}/etc/conf.d/net.example as there is no"
-			ewarn "guarantee that they will work in future versions."
-			echo
-	fi
-
-	# Remove old stuff that may cause problems.
-	if [[ -e "${ROOT}"/etc/env.d/01hostname ]] ; then
-		rm -f "${ROOT}"/etc/env.d/01hostname
-	fi
-	if [[ -e "${ROOT}"/etc/init.d/domainname ]] ; then
-		rm -f "${ROOT}"/etc/init.d/domainname
-		rm -f "${ROOT}"/etc/runlevels/*/domainname
-		ewarn "The domainname init script has been removed in this version."
-		ewarn "Consult ${ROOT}/etc/conf.d/net.example for details about how"
-		ewarn "to apply dns/nis information to the loopback interface."
-	fi
-}
diff --git a/sys-apps/baselayout/baselayout-1.12.2.ebuild b/sys-apps/baselayout/baselayout-1.12.2.ebuild
deleted file mode 100644
index 49d4c2304562..000000000000
--- a/sys-apps/baselayout/baselayout-1.12.2.ebuild
+++ /dev/null
@@ -1,610 +0,0 @@
-# Copyright 1999-2006 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/baselayout/baselayout-1.12.2.ebuild,v 1.1 2006/08/01 09:14:52 uberlord Exp $
-
-inherit flag-o-matic eutils toolchain-funcs multilib
-
-DESCRIPTION="Filesystem baselayout and init scripts"
-HOMEPAGE="http://www.gentoo.org/"
-SRC_URI="mirror://gentoo/${P}.tar.bz2
-	http://dev.gentoo.org/~uberlord/baselayout/${P}.tar.bz2
-	http://dev.gentoo.org/~azarah/baselayout/${P}.tar.bz2
-	http://dev.gentoo.org/~vapier/dist/${P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="bootstrap build static unicode"
-
-# This version of baselayout needs gawk in /bin, but as we do not have
-# a c++ compiler during bootstrap, we cannot depend on it if "bootstrap"
-# or "build" are in USE.
-RDEPEND=">=sys-apps/sysvinit-2.86-r3
-	!build? ( !bootstrap? (
-		>=sys-libs/readline-5.0-r1
-		>=app-shells/bash-3.1_p7
-		>=sys-apps/coreutils-5.2.1
-	) )"
-DEPEND="virtual/os-headers
-	>=sys-apps/portage-2.0.51"
-PROVIDE="virtual/baselayout"
-
-src_unpack() {
-	unpack ${A}
-	cd "${S}"
-
-	# Setup unicode defaults for silly unicode users
-	if use unicode ; then
-		sed -i -e '/^UNICODE=/s:no:yes:' etc/rc.conf
-	fi
-
-	# Tweak arch-specific details
-	cd "${S}"
-
-	case $(tc-arch) in
-	sparc)
-		sed -i -e '/^KEYMAP=/s:us:sunkeymap:' etc/conf.d/keymaps || die
-		# Disable interactive boot on sparc due to stty calls, #104067
-		sed -i -e '/^RC_INTERACTIVE=/s:yes:no:' etc/conf.d/rc || die
-		;;
-	esac
-
-	# Use correct path to filefuncs.so on multilib systems
-	sed -i -e "s:/lib/rcscripts:/$(get_libdir)/rcscripts:" \
-		${S}/src/awk/{cachedepends,genenviron}.awk || die
-}
-
-src_compile() {
-	local libdir="lib"
-
-	use static && append-ldflags -static
-
-	[[ ${SYMLINK_LIB} == "yes" ]] && libdir=$(get_abi_LIBDIR "${DEFAULT_ABI}")
-
-	make -C "${S}"/src \
-		CC="$(tc-getCC)" \
-		LD="$(tc-getCC) ${LDFLAGS}" \
-		CFLAGS="${CFLAGS}" \
-		LIBDIR="${libdir}" || die
-}
-
-# ${PATH} should include where to get MAKEDEV when calling this
-# function
-create_dev_nodes() {
-	case $(tc-arch) in
-		# amd64 must use generic-i386 because amd64/x86_64 does not have
-		# a generic option at this time, and the default 'generic' ends
-		# up erroring out, because MAKEDEV internally doesn't know what
-		# to use
-		arm*)    suffix=-arm ;;
-		alpha)   suffix=-alpha ;;
-		amd64)   suffix=-i386 ;;
-		hppa)    suffix=-hppa ;;
-		ia64)    suffix=-ia64 ;;
-		m68k)    suffix=-m68k ;;
-		mips*)   suffix=-mips ;;
-		ppc*)    suffix=-powerpc ;;
-		s390*)   suffix=-s390 ;;
-		sh*)     suffix=-sh ;;
-		sparc*)  suffix=-sparc ;;
-		x86)     suffix=-i386 ;;
-	esac
-
-	einfo "Using generic${suffix} to make $(tc-arch) device nodes..."
-	MAKEDEV generic${suffix}
-	MAKEDEV sg scd rtc hde hdf hdg hdh input audio video
-}
-
-# This is a temporary workaround until bug 9849 is completely solved
-# in portage.  We need to create the directories so they're available
-# during src_install, but when src_install is finished, call unkdir
-# to remove any empty directories instead of leaving them around.
-kdir() {
-	typeset -a args
-	typeset d
-
-	# Create the directories for the remainder of src_install, and
-	# remember how to create the directories later.
-	for d in "$@"; do
-		if [[ $d == /* ]]; then
-			install -d "${args[@]}" "${D}/${d}"
-			cat >> "${D}/usr/share/baselayout/mkdirs.sh" <<EOF
-if [ ! -d "\${ROOT}/${d}" ] ; then \\
-	install -d ${args[@]} "\${ROOT}/${d}" 2>/dev/null \\
-		|| ewarn "  can't create ${d}"
-	touch "\${ROOT}/${d}/.keep" 2>/dev/null \\
-		|| ewarn "  can't create ${d}/.keep"
-fi
-EOF
-		else
-			args=("${args[@]}" "${d}")
-		fi
-	done
-}
-
-# Continued from kdir above...  This function removes any empty
-# directories as a temporary workaround for bug 9849.  The directories
-# (and .keep files) are re-created in pkg_postinst, which means they
-# aren't listed in CONTENTS, unfortunately.
-unkdir() {
-	einfo "Running unkdir to workaround bug 9849"
-	find "${D}" -depth -type d -exec rmdir {} \; 2>/dev/null
-	if [[ $? == 127 ]]; then
-		ewarn "Problem running unkdir: find command not found"
-	fi
-}
-
-# Same as kdir above, but for symlinks #103618
-ksym() {
-	echo "[[ ! -e ${ROOT}/$2 ]] && { ln -s '$1' '${ROOT}/$2' &> /dev/null || ewarn '  unable to symlink $2 to $1' ; }" \
-		>> "${D}"/usr/share/baselayout/mklinks.sh
-}
-
-src_install() {
-	local dir libdirs libdirs_env rcscripts_dir
-
-	# This directory is to stash away things that will be used in
-	# pkg_postinst; it's needed first for kdir to function
-	dodir /usr/share/baselayout
-
-	# Jeremy Huddleston <eradicator@gentoo.org>
-	# For multilib, we want to make sure that all our multilibdirs exist
-	# and make lib even if it's not listed as one (like on amd64/ppc64
-	# which sometimes has lib32/lib64 instead of lib/lib64).
-	# lib should NOT be a symlink to one of the other libdirs.
-	# Old systems with symlinks won't be affected by this change, as the
-	# symlinks already exist and won't get removed, but new systems will
-	# be setup properly.
-	#
-	# I'll be making a script to convert existing systems from symlink to
-	# nosymlink and putting it in /usr/portage/scripts.
-	libdirs=$(get_all_libdirs)
-	: ${libdirs:=lib}	# it isn't that we don't trust multilib.eclass...
-
-	# This should be /lib/rcscripts, but we have to support old profiles too.
-	if [[ ${SYMLINK_LIB} == "yes" ]]; then
-		rcscripts_dir="/$(get_abi_LIBDIR ${DEFAULT_ABI})/rcscripts"
-	else
-		rcscripts_dir="/lib/rcscripts"
-	fi
-
-	einfo "Creating directories..."
-	kdir /usr
-	kdir /usr/local
-	kdir /boot
-	kdir /dev
-	kdir /dev/pts
-	kdir /dev/shm
-	kdir /etc/conf.d
-	kdir /etc/cron.daily
-	kdir /etc/cron.hourly
-	kdir /etc/cron.monthly
-	kdir /etc/cron.weekly
-	kdir /etc/env.d
-	dodir /etc/init.d			# .keep file might mess up init.d stuff
-	kdir /etc/modules.autoload.d
-	kdir /etc/modules.d
-	kdir /etc/opt
-	kdir /home
-	kdir ${rcscripts_dir}
-	kdir ${rcscripts_dir}/awk
-	kdir ${rcscripts_dir}/sh
-	kdir ${rcscripts_dir}/net
-	# Only install /mnt stuff at bootstrap time #88835 / #90022
-	if use build ; then
-		kdir /mnt
-		kdir -m 0700 /mnt/cdrom
-		kdir -m 0700 /mnt/floppy
-	fi
-	kdir /opt
-	kdir -o root -g uucp -m0775 /var/lock
-	kdir /proc
-	kdir -m 0700 /root
-	kdir /sbin
-	kdir /sys	# for 2.6 kernels
-	kdir /usr/bin
-	kdir /usr/include
-	kdir /usr/include/asm
-	kdir /usr/include/linux
-	kdir /usr/local/bin
-	kdir /usr/local/games
-	kdir /usr/local/sbin
-	kdir /usr/local/share
-	kdir /usr/local/share/doc
-	kdir /usr/local/share/man
-	kdir /usr/local/src
-	kdir ${PORTDIR}
-	kdir /usr/sbin
-	kdir /usr/share/doc
-	kdir /usr/share/info
-	kdir /usr/share/man
-	kdir /usr/share/misc
-	kdir /usr/src
-	kdir -m 1777 /tmp
-	kdir /var
-	dodir /var/db/pkg			# .keep file messes up Portage
-	kdir /var/lib/misc
-	kdir /var/lock/subsys
-	kdir /var/log/news
-	kdir /var/run
-	kdir /var/spool
-	kdir /var/state
-	kdir -m 1777 /var/tmp
-
-	for dir in ${libdirs}; do
-		libdirs_env=${libdirs_env:+$libdirs_env:}/${dir}:/usr/${dir}:/usr/local/${dir}
-		[[ ${dir} == "lib" && ${SYMLINK_LIB} == "yes" ]] && continue
-		kdir /${dir}
-		kdir /usr/${dir}
-		kdir /usr/local/${dir}
-	done
-
-	# Ugly compatibility with stupid ebuilds and old profiles symlinks
-	if [[ ${SYMLINK_LIB} == "yes" ]] ; then
-		rm -r "${D}"/{lib,usr/lib,usr/local/lib} &> /dev/null
-		ksym $(get_abi_LIBDIR ${DEFAULT_ABI}) /lib
-		ksym $(get_abi_LIBDIR ${DEFAULT_ABI}) /usr/lib
-		ksym $(get_abi_LIBDIR ${DEFAULT_ABI}) /usr/local/lib
-	fi
-
-	kdir /$(get_libdir)/dev-state
-	kdir /$(get_libdir)/udev-state
-
-	# FHS compatibility symlinks stuff
-	ksym /var/tmp /usr/tmp
-	ksym share/man /usr/local/man
-
-	#
-	# Setup files in /etc
-	#
-	insopts -m0644
-	insinto /etc
-	doins -r "${S}"/etc/*
-	fperms 0640 /etc/sysctl.conf
-
-	# Install some files to /usr/share/baselayout instead of /etc to keep from
-	# (1) overwriting the user's settings, (2) screwing things up when
-	# attempting to merge files, (3) accidentally packaging up personal files
-	# with quickpkg
-	fperms 0600 /etc/shadow
-	mv "${D}"/etc/{passwd,shadow,group,fstab,hosts,issue.devfix} "${D}"/usr/share/baselayout
-
-	# doinitd doesnt respect symlinks
-	dodir /etc/init.d
-	cp -P "${S}"/init.d/* "${D}"/etc/init.d/ || die "doinitd"
-	#doinitd "${S}"/init.d/* || die "doinitd"
-	doconfd "${S}"/etc/conf.d/* || die "doconfd"
-	doenvd "${S}"/etc/env.d/* || die "doenvd"
-	insinto /etc/modules.autoload.d
-	doins "${S}"/etc/modules.autoload.d/*
-	insinto /etc/modules.d
-	doins "${S}"/etc/modules.d/*
-
-	# Special-case uglyness... For people updating from lib32 -> lib amd64
-	# profiles, keep lib32 in the search path while it's around
-	if has_multilib_profile && [ -d /lib32 -o -d /usr/lib32 ] && ! hasq lib32 ${libdirs}; then
-		libdirs_env="${libdirs_env}:/lib32:/usr/lib32:/usr/local/lib32"
-	fi
-
-	# List all the multilib libdirs in /etc/env/04multilib (only if they're
-	# actually different from the normal
-	if has_multilib_profile || [[ $(get_libdir) != "lib" || -n ${CONF_MULTILIBDIR} ]]; then
-		echo "LDPATH=\"${libdirs_env}\"" > ${D}/etc/env.d/04multilib
-	fi
-
-	# As of baselayout-1.10-1-r1, sysvinit is its own package again, and
-	# provides the inittab itself
-	rm -f "${D}"/etc/inittab
-
-	# Stash the rc-lists for use during pkg_postinst
-	cp -r "${S}"/rc-lists "${D}"/usr/share/baselayout
-
-	# rc-scripts version for testing of features that *should* be present
-	echo "Gentoo Base System version ${PV}" > ${D}/etc/gentoo-release
-
-	#
-	# Setup files related to /dev
-	#
-	into /
-	dosbin "${S}"/sbin/MAKEDEV
-	dosym ../../sbin/MAKEDEV /usr/sbin/MAKEDEV
-	dosym ../sbin/MAKEDEV /dev/MAKEDEV
-
-	#
-	# Setup files in /bin
-	#
-	cd "${S}"/bin
-	dobin rc-status
-
-	#
-	# Setup files in /sbin
-	#
-	cd "${S}"/sbin
-	into /
-	dosbin rc rc-update
-	# Need this in /sbin, as it could be run before
-	# /usr is mounted.
-	dosbin modules-update
-	# Compat symlinks until I can get things synced.
-	dosym modules-update /sbin/update-modules
-	dosym ../../sbin/modules-update /usr/sbin/update-modules
-	# These moved from /etc/init.d/ to /sbin to help newb systems
-	# from breaking
-	dosbin runscript.sh functions.sh
-
-	# Compat symlinks between /etc/init.d and /sbin
-	# (some stuff have hardcoded paths)
-	dosym ../../sbin/depscan.sh /etc/init.d/depscan.sh
-	dosym ../../sbin/runscript.sh /etc/init.d/runscript.sh
-	dosym ../../sbin/functions.sh /etc/init.d/functions.sh
-
-	#
-	# Setup files in /lib/rcscripts
-	# These are support files for other things in baselayout that needn't be
-	# under CONFIG_PROTECTed /etc
-	#
-	cd "${S}"/sbin
-	exeinto ${rcscripts_dir}/sh
-	doexe rc-services.sh rc-daemon.sh rc-help.sh
-
-	# We can only install new, fast awk versions of scripts
-	# if 'build' or 'bootstrap' is not in USE.  This will
-	# change if we have sys-apps/gawk-3.1.1-r1 or later in
-	# the build image ...
-	if ! use build; then
-		# This is for new depscan.sh and env-update.sh
-		# written in awk
-		cd "${S}"/sbin
-		into /
-		dosbin depscan.sh
-		dosbin env-update.sh
-		insinto ${rcscripts_dir}/awk
-		doins "${S}"/src/awk/*.awk
-	fi
-
-	# Original design had these in /etc/net.modules.d but that is too
-	# problematic with CONFIG_PROTECT
-	dodir ${rcscripts_dir}
-	cp -pPR "${S}"/lib/rcscripts/net ${D}${rcscripts_dir}
-	chown -R root:0 ${D}${rcscripts_dir}
-
-	#
-	# Install baselayout documentation
-	#
-	if ! use build ; then
-		doman "${S}"/man/*.*
-		docinto /
-		dodoc ${FILESDIR}/copyright
-		dodoc "${S}"/ChangeLog
-	fi
-
-	#
-	# Install baselayout utilities
-	#
-	cd "${S}"/src
-	make DESTDIR="${D}" LIBDIR="$(get_libdir)" install || die
-
-	# Hack to fix bug 9849, continued in pkg_postinst
-	unkdir
-}
-
-# Support function for remapping old wireless dns vars
-remap_dns_vars() {
-	local f="$1"
-
-	if [[ -f ${ROOT}/etc/conf.d/${f} ]]; then
-		sed -e 's/\<domain_/dns_domain_/g' \
-			-e 's/\<mac_domain_/mac_dns_domain_/g' \
-			-e 's/\<nameservers_/dns_servers_/g' \
-			-e 's/\<mac_nameservers_/mac_dns_servers_/g' \
-			-e 's/\<searchdomains_/dns_search_domains_/g' \
-			-e 's/\<mac_searchdomains_/mac_dns_search_domains_/g' \
-			${ROOT}/etc/conf.d/${f} > ${IMAGE}/etc/conf.d/${f}
-	fi
-}
-
-pkg_preinst() {
-	if [[ -f ${ROOT}/etc/modules.autoload && \
-			! -d ${ROOT}/etc/modules.autoload.d ]]; then
-		mkdir -p ${ROOT}/etc/modules.autoload.d
-		mv -f ${ROOT}/etc/modules.autoload \
-			${ROOT}/etc/modules.autoload.d/kernel-2.4
-		ln -snf modules.autoload.d/kernel-2.4 ${ROOT}/etc/modules.autoload
-	fi
-
-	# Change some vars introduced in baselayout-1.11.0 before we go stable
-	# The new names make more sense and allow nis_domain
-	# for use in baselayout-1.12.0
-	remap_dns_vars net
-	remap_dns_vars wireless
-}
-
-pkg_postinst() {
-	local x y
-
-	# Reincarnate dirs from kdir/unkdir (hack for bug 9849)
-	einfo "Creating directories and .keep files."
-	einfo "Some of these might fail if they're read-only mounted"
-	einfo "filesystems, for example /dev or /proc.  That's okay!"
-	source "${ROOT}"/usr/share/baselayout/mkdirs.sh
-	source "${ROOT}"/usr/share/baselayout/mklinks.sh
-	echo
-
-	# This could be done in src_install, which would have the benefit of
-	# (1) devices.tar.bz2 would show up in CONTENTS
-	# (2) binary installations would be faster... just untar the devices tarball
-	#     instead of needing to run MAKEDEV
-	# However the most common cases are that people are either updating
-	# baselayout or installing from scratch.  In the installation case, it's no
-	# different to have here instead of src_install.  In the update case, we
-	# save a couple minutes time by refraining from building the unnecessary
-	# tarball.
-	if [[ ! -f "${ROOT}/lib/udev-state/devices.tar.bz2" ]]; then
-		# Create a directory in which to work
-		x=$(emktemp -d ${ROOT}/tmp/devnodes.XXXXXXXXX) \
-			&& cd "${x}" || die 'mktemp failed'
-
-		# Create temp device nodes
-		echo
-		einfo "Making device node tarball (this could take a couple minutes)"
-		PATH=${ROOT}/sbin:${PATH} create_dev_nodes
-
-		# Now create tarball that can also be used for udev.
-		# Need GNU tar for -j so call it by absolute path.
-		/bin/tar --one-file-system -cjpf "${ROOT}/lib/udev-state/devices.tar.bz2" *
-		rm -r *
-		cd ..
-		rmdir "${x}"
-	fi
-
-	# We don't want to create devices if this is not a bootstrap and devfs
-	# is used, as this was the cause for all the devfs problems we had
-	if use build || use bootstrap; then
-		if [[ ! -e "${ROOT}/dev/.devfsd" && ! -e "${ROOT}/dev/.udev" ]]; then
-			einfo "Populating /dev with device nodes..."
-			cd ${ROOT}/dev || die
-			tar xjpf "${ROOT}/lib/udev-state/devices.tar.bz2" || die
-		fi
-	fi
-
-	# Create /boot/boot symlink in pkg_postinst because sometimes
-	# /boot is a FAT filesystem.  When that is the case, then the
-	# symlink will fail.  Consequently, if we create it in
-	# src_install, then merge will fail.  AFAIK there is no point to
-	# this symlink except for misconfigured grubs.  See bug 50108
-	# (05 May 2004 agriffis)
-	ln -sn . "${ROOT}"/boot/boot 2>/dev/null
-
-	# Set up default runlevel symlinks
-	# This used to be done in src_install but required knowledge of ${ROOT},
-	# which meant that it was effectively broken for binary installs.
-	if [[ -z $(/bin/ls "${ROOT}"/etc/runlevels 2>/dev/null) ]]; then
-		for x in boot default nonetwork single; do
-			einfo "Creating default runlevel symlinks for ${x}"
-			mkdir -p "${ROOT}"/etc/runlevels/${x}
-			for y in $(<"${ROOT}"/usr/share/baselayout/rc-lists/${x}); do
-				if [[ ! -e ${ROOT}/etc/init.d/${y} ]]; then
-					ewarn "init.d/${y} not found -- ignoring"
-				else
-					ln -sfn /etc/init.d/${y} \
-						"${ROOT}"/etc/runlevels/${x}/${y}
-				fi
-			done
-		done
-	fi
-
-	# Create /etc/hosts in pkg_postinst so we don't overwrite an
-	# existing file during bootstrap
-	if [[ ! -e ${ROOT}/etc/hosts ]]; then
-		cp ${ROOT}/usr/share/baselayout/hosts ${ROOT}/etc
-	fi
-
-	# Touching /etc/passwd and /etc/shadow after install can be fatal, as many
-	# new users do not update them properly...  see src_install() for why they
-	# are in /usr/share/baselayout/
-	for x in passwd shadow group fstab ; do
-		if [[ -e ${ROOT}/etc/${x} ]] ; then
-			touch "${ROOT}/etc/${x}"
-		else
-			cp "${ROOT}/usr/share/baselayout/${x}" "${ROOT}/etc/${x}"
-		fi
-	done
-
-	# Under what circumstances would mtab be a symlink?  It would be
-	# nice if there were an explanatory comment here
-	if [[ -L ${ROOT}/etc/mtab ]]; then
-		rm -f "${ROOT}/etc/mtab"
-		if [[ ${ROOT} == / ]]; then
-			cp /proc/mounts "${ROOT}/etc/mtab"
-		else
-			touch "${ROOT}/etc/mtab"
-		fi
-	fi
-
-	# We should only install empty files if these files don't already exist.
-	[[ -e ${ROOT}/var/log/lastlog ]] || \
-		touch "${ROOT}/var/log/lastlog"
-	[[ -e ${ROOT}/var/run/utmp ]] || \
-		install -m 0664 -g utmp /dev/null "${ROOT}/var/run/utmp"
-	[[ -e ${ROOT}/var/log/wtmp ]] || \
-		install -m 0664 -g utmp /dev/null "${ROOT}/var/log/wtmp"
-
-	# Reload init to fix unmounting problems of / on next reboot.
-	# This is really needed, as without the new version of init cause init
-	# not to quit properly on reboot, and causes a fsck of / on next reboot.
-	if [[ ${ROOT} == / ]] && ! use build && ! use bootstrap; then
-		# Regenerate init.d dependency tree
-		/sbin/depscan.sh --update &>/dev/null
-
-		# Regenerate /etc/modules.conf, else it will fail at next boot
-		einfo "Updating module dependencies..."
-		/sbin/modules-update force &>/dev/null
-	else
-		rm -f ${ROOT}/etc/modules.conf
-	fi
-
-	# This is also written in src_install (so it's in CONTENTS), but
-	# write it here so that the new version is immediately in the file
-	# (without waiting for the user to do etc-update)
-	rm -f ${ROOT}/etc/._cfg????_gentoo-release
-	echo "Gentoo Base System version ${PV}" > ${ROOT}/etc/gentoo-release
-
-	echo
-	einfo "Please be sure to update all pending '._cfg*' files in /etc,"
-	einfo "else things might break at your next reboot!  You can use 'etc-update'"
-	einfo "to accomplish this:"
-	einfo
-	einfo "  # etc-update"
-	echo
-
-	for f in /etc/init.d/net.eth*; do
-		[[ -L ${f} ]] && continue
-		echo
-		einfo "WARNING: You have older net.eth* files in ${ROOT}/etc/init.d/"
-		einfo "They need to be converted to symlinks to net.lo.  If you haven't"
-		einfo "made personal changes to those files, you can update with the"
-		einfo "following command:"
-		einfo
-		einfo "  # /bin/ls /etc/init.d/net.eth* | xargs -n1 ln -sfvn net.lo"
-		echo
-		break
-	done
-
-	if sed -e 's/#.*//' ${ROOT}/etc/conf.d/{net,wireless} 2>/dev/null \
-		| egrep -q '\<(domain|nameservers|searchdomains)_' ; then
-			echo
-			ewarn "You have depreciated variables in ${ROOT}/etc/conf.d/net"
-			ewarn "or ${ROOT}/etc/conf.d/wireless"
-			ewarn
-			ewarn "domain_* -> dns_domain_*"
-			ewarn "nameservers_* -> dns_servers_*"
-			ewarn "searchdomains_* -> dns_search_domains_*"
-			ewarn
-			ewarn "They have been converted for you - ensure that you"
-			ewarn "update them via 'etc-update'"
-			echo
-	fi
-
-	if sed -e 's/#.*//' ${ROOT}/etc/conf.d/net 2>/dev/null \
-		| egrep -q '\<(ifconfig|aliases|broadcasts|netmasks|inet6|ipaddr|iproute)_'; then
-			echo
-			ewarn "You are using deprecated variables in ${ROOT}/etc/conf.d/net"
-			ewarn
-			ewarn "You are advised to review the new configuration variables as"
-			ewarn "found in ${ROOT}/etc/conf.d/net.example as there is no"
-			ewarn "guarantee that they will work in future versions."
-			echo
-	fi
-
-	# Remove old stuff that may cause problems.
-	if [[ -e "${ROOT}"/etc/env.d/01hostname ]] ; then
-		rm -f "${ROOT}"/etc/env.d/01hostname
-	fi
-	if [[ -e "${ROOT}"/etc/init.d/domainname ]] ; then
-		rm -f "${ROOT}"/etc/init.d/domainname
-		rm -f "${ROOT}"/etc/runlevels/*/domainname
-		ewarn "The domainname init script has been removed in this version."
-		ewarn "Consult ${ROOT}/etc/conf.d/net.example for details about how"
-		ewarn "to apply dns/nis information to the loopback interface."
-	fi
-}