summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'net-print/hplip/hplip-3.9.8-r2.ebuild')
-rw-r--r--net-print/hplip/hplip-3.9.8-r2.ebuild253
1 files changed, 253 insertions, 0 deletions
diff --git a/net-print/hplip/hplip-3.9.8-r2.ebuild b/net-print/hplip/hplip-3.9.8-r2.ebuild
new file mode 100644
index 000000000000..7fd0f9b33b16
--- /dev/null
+++ b/net-print/hplip/hplip-3.9.8-r2.ebuild
@@ -0,0 +1,253 @@
+# Copyright 1999-2009 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.9.8-r2.ebuild,v 1.1 2009/10/14 22:05:24 billie Exp $
+
+EAPI="2"
+
+inherit fdo-mime linux-info python autotools
+
+DESCRIPTION="HP Linux Imaging and Printing System. Includes printer, scanner, fax drivers and service tools."
+HOMEPAGE="http://hplip.sourceforge.net/"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+
+IUSE="doc fax gtk +hpcups hpijs libnotify minimal parport policykit qt3 qt4 scanner snmp static-ppds -udev-acl"
+
+# Note : libusb-compat untested (calchan 20090516)
+
+COMMON_DEPEND="
+ virtual/ghostscript
+ media-libs/jpeg
+ hpijs? ( >=net-print/foomatic-filters-3.0.20080507[cups] )
+ !static-ppds? ( || ( >=net-print/cups-1.4.0 net-print/cupsddk ) )
+ udev-acl? ( >=sys-fs/udev-145[extras] )
+ !minimal? (
+ net-print/cups
+ virtual/libusb:0
+ >=dev-lang/python-2.4.4[threads,xml]
+ scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
+ snmp? (
+ net-analyzer/net-snmp
+ dev-libs/openssl
+ )
+ )"
+
+DEPEND="${COMMON_DEPEND}
+ dev-util/pkgconfig"
+
+RDEPEND="${COMMON_DEPEND}
+ !minimal? (
+ kernel_linux? ( >=sys-fs/udev-114 )
+ scanner? (
+ dev-python/imaging
+ gtk? ( media-gfx/xsane )
+ !gtk? ( media-gfx/sane-frontends )
+ )
+ fax? (
+ dev-python/reportlab
+ sys-apps/dbus
+ dev-python/dbus-python
+ )
+ qt3? ( !qt4? (
+ dev-python/PyQt
+ ) )
+ qt4? (
+ dev-python/PyQt4[dbus,X]
+ dev-python/pygobject
+ libnotify? (
+ dev-python/notify-python
+ )
+ policykit? (
+ sys-auth/policykit
+ )
+ )
+ )"
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure parallel port support is enabled in your kernel (PARPORT and PPDEV)."
+
+pkg_setup() {
+ ! use qt3 && ! use qt4 && ewarn "You need USE=qt4 or USE=qt3 for the hplip GUI."
+
+ use scanner && ! use gtk && ewarn "You need USE=gtk for the scanner GUI."
+
+ if ! use hpcups && ! use hpijs ; then
+ ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+ ewarn "which is probably not what you want."
+ ewarn "You will almost certainly not be able to print."
+ ewarn "Recommended USE flags: USE=\"hpcups -hpijs\")."
+ fi
+
+ if use minimal ; then
+ ewarn "Installing driver portions only, make sure you know what you are doing."
+ else
+ use parport && linux-info_pkg_setup
+ fi
+}
+
+src_prepare() {
+ sed -i -e "s/'skipstone']/'skipstone', 'epiphany']/" \
+ -e "s/'skipstone': ''}/'skipstone': '', 'epiphany': '--new-window'}/" \
+ base/utils.py || die "Sed base/utils.py failed"
+
+ # bug 98428
+ sed -i -e "s:/usr/bin/env python:/usr/bin/python:g" hpssd.py || die "Sed hpssd.py failed"
+
+ # Force recognition of Gentoo distro by hp-check
+ sed -i \
+ -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+ installer/core_install.py || die "Sed installer/core_install.py failed"
+
+ # SYSFS deprecated - https://bugs.launchpad.net/hplip/+bug/346390
+ sed -i -e "s/SYSFS/ATTRS/g" -e "s/sysfs/attrs/g" data/rules/56-hpmud_support.rules \
+ data/rules/55-hpmud.rules || die "Sed 55-hpmud.rules 56-hpmud_support.rules failed"
+
+ sed -i \
+ -e s:/usr/lib/cups/driver:$(cups-config --serverbin)/driver:g \
+ installer/core_install.py || die "Sed installer/core_install.py failed"
+
+ # Use system foomatic-rip instead of foomatic-rip-hplip
+ local i
+ for i in ppd/{hpcups,hpijs}/*.ppd.gz
+ do
+ rm -f ${i}.temp
+ gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | gzip > ${i}.temp || die "Sed *.ppd.gz failed"
+ mv ${i}.temp ${i}
+ done
+
+ local qt_ver
+ if use qt3 || use qt4 ; then
+ use qt3 && qt_ver="3"
+ use qt4 && qt_ver="4"
+ sed -i \
+ -e "s/%s --force-startup/%s --force-startup --qt${qt_ver}/" \
+ -e "s/'--force-startup'/'--force-startup', '--qt${qt_ver}'/" \
+ base/device.py || die "Sed base/device.py failed"
+ sed -i \
+ -e "s/Exec=hp-systray/Exec=hp-systray --qt${qt_ver}/" \
+ hplip-systray.desktop.in || die "Sed hplip-systray.desktop.in failed"
+ fi
+
+ # htmldocs are not installed under docdir/html
+ # the following sed enables --htmldir configure switch in src_configure
+ if use doc ; then
+ sed -i -e 's/www\([0-9]\)dir = $(docdir)/www\1dir = $(htmldir)/g' Makefile.am || die "Sed Makefile.am failed"
+ fi
+
+ eautoreconf
+}
+
+src_configure() {
+ local drv_build gui_build myconf
+
+ if use qt3 || use qt4 ; then
+ gui_build="--enable-gui-build"
+ if use qt4 ; then
+ gui_build="${gui_build} --enable-qt4 --disable-qt3"
+ if use policykit ; then
+ myconf="--enable-policykit"
+ else
+ myconf="--disable-policykit"
+ fi
+ else
+ use qt3 && gui_build="${gui_build} --enable-qt3 --disable-qt4"
+ fi
+ else
+ gui_build="--disable-gui-build"
+ fi
+
+ if use fax || use qt4 ; then
+ myconf="${myconf} --enable-dbus-build"
+ else
+ myconf="${myconf} --disable-dbus-build"
+ fi
+
+ if use hpcups ; then
+ drv_build="${drv_build} $(use_enable hpcups hpcups-install)"
+ if use static-ppds ; then
+ drv_build="${drv_build} --enable-cups-ppd-install"
+ drv_build="${drv_build} --disable-cups-drv-install"
+ else
+ drv_build="${drv_build} --enable-cups-drv-install"
+ drv_build="${drv_build} --disable-cups-ppd-install"
+ fi
+ fi
+
+ if use hpijs ; then
+ drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+ if use static-ppds ; then
+ drv_build="${drv_build} --enable-foomatic-ppd-install"
+ drv_build="${drv_build} --disable-foomatic-drv-install"
+ else
+ drv_build="${drv_build} --enable-foomatic-drv-install"
+ drv_build="${drv_build} --disable-foomatic-ppd-install"
+ fi
+ fi
+
+ econf \
+ --disable-dependency-tracking \
+ --disable-cups11-build \
+ --disable-lite-build \
+ --disable-new-hpcups \
+ --disable-foomatic-rip-hplip-install \
+ --disable-shadow-build \
+ --with-cupsbackenddir=$(cups-config --serverbin)/backend \
+ --with-cupsfilterdir=$(cups-config --serverbin)/filter \
+ --htmldir=/usr/share/doc/${P}/html \
+ ${drv_build} \
+ ${gui_build} \
+ ${myconf} \
+ $(use_enable doc doc-build) \
+ $(use_enable fax fax-build) \
+ $(use_enable minimal hpijs-only-build) \
+ $(use_enable parport pp-build) \
+ $(use_enable scanner scan-build) \
+ $(use_enable snmp network-build) \
+ $(use_enable udev-acl udev-acl-rules)
+}
+
+src_install() {
+ emake DESTDIR="${D}" install || die "Emake install failed"
+
+ # Bug #201023
+ rm -f "${D}"/etc/sane.d/dll.conf
+
+ # bug 106035/259763
+ if ! use qt3 && ! use qt4 ; then
+ rm -r "${D}"/usr/share/applications "${D}"/etc/xdg
+ fi
+
+ # kde3 autostart hack
+ if [[ -d /usr/kde/3.5/share/autostart ]] && use !minimal ; then
+ insinto /usr/kde/3.5/share/autostart
+ doins hplip-systray.desktop
+ fi
+}
+
+pkg_preinst() {
+ # avoid collisions with cups-1.2 compat symlinks
+ if [ -e "${ROOT}"/usr/lib/cups/backend/hp ] && [ -e "${ROOT}"/usr/libexec/cups/backend/hp ] ; then
+ rm "${ROOT}"/usr/libexec/cups/backend/hp{,fax}
+ fi
+}
+
+pkg_postinst() {
+ use !minimal && python_mod_optimize /usr/share/${PN}
+ fdo-mime_desktop_database_update
+
+ elog "You should run hp-setup as root if you are installing hplip for the first time, and may also"
+ elog "need to run it if you are upgrading from an earlier version."
+ elog
+ elog "If your device is connected using USB, users will need to be in the lp group to access it."
+ elog
+ elog "This release doesn't use an init script anymore, so you should probably do a"
+ elog "'rc-update del hplip' if you are updating from an old version."
+}
+
+pkg_postrm() {
+ use !minimal && python_mod_cleanup /usr/share/${PN}
+ fdo-mime_desktop_database_update
+}