diff options
Diffstat (limited to 'sys-boot/lilo/files/lilo.conf')
| -rw-r--r-- | sys-boot/lilo/files/lilo.conf | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/sys-boot/lilo/files/lilo.conf b/sys-boot/lilo/files/lilo.conf new file mode 100644 index 000000000000..1c0c48acc19a --- /dev/null +++ b/sys-boot/lilo/files/lilo.conf @@ -0,0 +1,73 @@ +# $Id$ +# Author: Ultanium + +# +# Start LILO global section +# + +# Faster, but won't work on all systems: +#compact +# Should work for most systems, and do not have the sector limit: +lba32 +# If lba32 do not work, use linear: +#linear + +# MBR to install LILO to: +boot = /dev/hda +map = /boot/.map + +# If you are having problems booting from a hardware raid-array +# or have a unusual setup, try this: +#disk=/dev/ataraid/disc0/disc bios=0x80 # see this as the first BIOS disk +#disk=/dev/sda bios=0x81 # see this as the second BIOS disk +#disk=/dev/hda bios=0x82 # see this as the third BIOS disk + +# Here you can select the secondary loader to install. A few +# examples is: +# +# boot-text.b +# boot-menu.b +# boot-bmp.b +# +install = /boot/boot-menu.b # Note that for lilo-22.5.5 or later you + # do not need boot-{text,menu,bmp}.b in + # /boot, as they are linked into the lilo + # binary. + +menu-scheme=Wb +prompt +# If you always want to see the prompt with a 15 second timeout: +#timeout=150 +delay = 50 +# Normal VGA console +vga = normal +# VESA console with size 1024x768x16: +#vga = 791 + +# +# End LILO global section +# + +# +# Linux bootable partition config begins +# +image = /boot/bzImage + root = /dev/hda3 + #root = /devices/discs/disc0/part3 + label = Gentoo + read-only # read-only for checking +# +# Linux bootable partition config ends +# + +# +# DOS bootable partition config begins +# +other = /dev/hda1 + #other = /devices/discs/disc0/part1 + label = Windows + table = /dev/hda +# +# DOS bootable partition config ends +# + |