Initial import from bug #110665.

Package-Manager: portage-2.0.54

7 files changed, 411 insertions, 0 deletions

diff --git a/net-dialup/speedtouch-usb/ChangeLog b/net-dialup/speedtouch-usb/ChangeLog
new file mode 100644
index 000000000000..937cf50c2292
--- /dev/null
+++ b/net-dialup/speedtouch-usb/ChangeLog
@@ -0,0 +1,11 @@
+# ChangeLog for net-dialup/speedtouch-usb
+# Copyright 1999-2006 Gentoo Foundation; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/speedtouch-usb/ChangeLog,v 1.1 2006/03/18 20:10:52 mrness Exp $
+
+*speedtouch-usb-3.0.1.2 (18 Mar 2006)
+
+  18 Mar 2006; Alin Nastac <mrness@gentoo.org> +files/README,
+  +files/speedtch.usermap, +metadata.xml, +speedtouch-usb-3.0.1.2.ebuild:
+  Initial import from bug #110665. Credits goes to Paul Bredbury
+  <brebs@sent.com>.
+
diff --git a/net-dialup/speedtouch-usb/Manifest b/net-dialup/speedtouch-usb/Manifest
new file mode 100644
index 000000000000..90054491ec69
--- /dev/null
+++ b/net-dialup/speedtouch-usb/Manifest
@@ -0,0 +1,16 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+MD5 665646ba2a935b9394c0b9f78a79e2a6 ChangeLog 484
+MD5 9ee871b46e9d9efa35efb70866f84ddf files/README 9905
+MD5 455d21a7ea0d002dcd3cb16b8ac4c16d files/digest-speedtouch-usb-3.0.1.2 76
+MD5 a20d50e68b46e8c5893c2a38606f3e11 files/speedtch.usermap 389
+MD5 82c09fc4e58b4a48f4730afef332413c metadata.xml 301
+MD5 56308fe2c4e4eb6149ec49719c885ea2 speedtouch-usb-3.0.1.2.ebuild 4402
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.2.2 (GNU/Linux)
+
+iD8DBQFEHGlcjG8pv1lIUX4RAonEAJ4hibLHcBapv4Imu2aok2ujPcNrJwCfRF9T
+JEj1tmqmt8uvJ9OTm+zChFU=
+=p4Ue
+-----END PGP SIGNATURE-----
diff --git a/net-dialup/speedtouch-usb/files/README b/net-dialup/speedtouch-usb/files/README
new file mode 100644
index 000000000000..1e3a9b20c5eb
--- /dev/null
+++ b/net-dialup/speedtouch-usb/files/README
@@ -0,0 +1,251 @@
+Introduction
+============
+
+This ebuild enables kernel-space support for Alcatel/Thomson SpeedTouch
+USB modems, which first appeared in kernel 2.6.10 as a replacement for
+the user-space driver. For earlier kernels, the "speedtouch" ebuild
+must be emerged instead.
+
+
+Configuration
+=============
+
+It is necessary to choose an interface number for the connection. This
+is arbitrary - the only requirement is that the connection number is
+not already in use. The first available number is 0, and it is usual to
+choose the lowest unused number. For the purposes of this document, 0
+will be chosen.
+
+Add the following lines to /etc/conf.d/net, then customize them as per
+the inline comments.
+
+a) /etc/conf.d/net for PPPoA links:
+  config_ppp0=( 'ppp' )  # Runs /lib/rcscripts/net.modules.d/pppd
+  link_ppp0='/dev/null'  # Not required by PPPoA links, but must be specified
+  # The 2 numbers represents the VPI&VCI of your ISP and they are separated 
+  #by a dot. Choose here, or ask your ISP:
+  #   http://www.linux-usb.org/SpeedTouch/faq/index.html#q12
+  plugins_ppp0=( 'pppoa 0.38' ) 
+  # 'man pppd' shows other options. Compression is disabled because it is
+  # rarely taken advantage of, and may interfere with the connection.
+  # Add option 'usepeerdns' to populate /etc/ppp/resolv.conf
+  pppd_ppp0=( updetach debug defaultroute noaccomp nobsdcomp noccp
+    nodeflate nopcomp novj novjccomp )
+  username_ppp0='username@isp.com'  # E.g. 'fredbloggs@hg5.btclick.com'
+  password_ppp0='password'  # ADSL password, assigned by your ISP
+
+  # If the kernel modules are not built-in, then you also need to load
+  # them before starting the PPP daemon:
+  function preup() {
+    if [[ "$1" = "ppp0" ]] ; then
+      modprobe -q pppoatm
+      modprobe -q speedtch
+    fi
+  }
+  
+b) /etc/conf.d/net for PPPoE links:
+  config_ppp0=( 'ppp' )  # Runs /lib/rcscripts/net.modules.d/pppd
+  # The name of the Ethernet interface over which PPPoE link
+  link_ppp0='nas0' #must correspond to the -c option of the br2684ctl utility
+  plugins_ppp0=( pppoe ) 
+  # 'man pppd' shows other options. Compression is disabled because it is
+  # rarely taken advantage of, and may interfere with the connection.
+  # Add option 'usepeerdns' to populate /etc/ppp/resolv.conf
+  pppd_ppp0=( updetach debug defaultroute noaccomp nobsdcomp noccp
+    nodeflate nopcomp novj novjccomp )
+  username_ppp0='username@isp.com'  # E.g. 'fredbloggs@hg5.btclick.com'
+  password_ppp0='password'  # ADSL password, assigned by your ISP
+
+  # If the kernel modules are not built-in, then you also need to load
+  # them before starting the PPP daemon:
+  function preup() {
+    if [[ "$1" = "ppp0" ]] ; then
+      modprobe -q speedtch
+	  # The number after -c correspond with the name of the Ethernet
+      # interface (e.g. 0 for nas0, ...)
+      # Use -e 0 for LLC mux or -e 1 for VC mux 
+      # The 2 numbers after -a represents the VPI&VCI of your ISP and 
+      # they are separated by a dot. Choose here, or ask your ISP:
+      #   http://www.linux-usb.org/SpeedTouch/faq/index.html#q12
+	  eval local nasifname=\$\{link_$1\}
+	  start-stop-daemon --start --pidfile /var/run/${nasifname}.pid --makepid -- \
+	  	br2684ctl -c ${nasifname#nas} -e 0 -a 0.38
+    fi
+  }
+  function postdown() {
+    if [[ "$1" = "ppp0" ]] ; then
+	  eval local nasifname=\$\{link_$1\}
+	  start-stop-daemon --stop --pidfile /var/run/${nasifname}.pid
+    fi
+  }
+
+Create a symlink for the new network interface, for it to be enabled by
+baselayout:
+  cd /etc/init.d && ln -sfn net.lo net.ppp0
+
+The "debug" option adds some extra commentary from pppd regarding the
+connection to /var/log/messages, e.g.:
+"sent [LCP ConfReq id=0x1 <magic 0x7bea6ef1>]". It is wise to keep the
+option on permanently, due to its usefulness when debugging.
+
+Alternatively, if you choosed to compile speedtouch driver as a 
+kernel module, you could load it through /etc/modules.autoload.d/kernel-2.6
+instead of loading it in preup function.
+This allows the kernel to load the firmware during bootup, before the
+network is configured, thus saving a couple of seconds from the startup
+time.
+
+Set RC_NET_STRICT_CHECKING="yes" in /etc/conf.d/rc, to prevent Internet
+services in /etc/init.d/ from starting before the Internet connection
+is established. Other options are to start/stop programs in
+/etc/ppp/ip-{up,down}.local, and to customize initscript dependencies
+as described in:
+  http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=4
+
+
+Starting the Connection
+=======================
+
+To start manually, with the modem connected:
+  /etc/init.d/net.ppp0 start
+
+To start automatically when the PC boots:
+  rc-update add net.ppp0 default
+
+
+Kernel Configuration
+====================
+
+The ebuild, during an emerge, checks that the required kernel modules
+are present.
+
+Note that in the list below, "[*]" means that the option is compiled
+into the kernel, whereas "[M]" means that the option can either be
+compiled into the kernel, or as a module. Compiling them into the
+kernel is preferable, to guarantee that the modules are already loaded
+when they are needed.
+
+In "make menuconfig", you can press "/" and search on e.g. "speedtouch"
+to see exactly where an option is - the location of an option and its
+dependencies can change between kernel versions.
+
+Check that the following kernel options are configured as shown (this
+list includes the prerequisites, e.g. USB_SPEEDTOUCH depends on USB):
+
+ Code maturity level options  --->
+  [*] Prompt for development and/or incomplete code/drivers
+        - CONFIG_EXPERIMENTAL
+
+ General setup  --->
+  [*] Kernel Userspace Events - CONFIG_KOBJECT_UEVENT
+        (for kernels < 2.6.16 *ONLY*)
+
+ Device Drivers  --->
+  Generic Driver Options  --->
+   [ ] Select only drivers that don't need compile-time external
+        firmware (*unselected*) - CONFIG_STANDALONE
+   [*] Hotplug firmware loading support - CONFIG_FW_LOADER
+
+ Networking  --->
+   [*] Networking support - CONFIG_NET
+   Networking options  --->
+    [*] Packet socket - CONFIG_PACKET
+    [M] Asynchronous Transfer Mode (ATM) - CONFIG_ATM
+   
+ Device Drivers  --->
+  Network device support  --->
+   [*] Network device support - CONFIG_NETDEVICES
+   [M] PPP (point-to-point protocol) support - CONFIG_PPP
+   [M] PPP Deflate compression - CONFIG_PPP_DEFLATE (only useful if
+        compression is supported - rare)
+   [M] PPP BSD-Compress compression - CONFIG_PPP_BSDCOMP (only useful
+        if compression is supported - rare)
+   [M] PPP over ATM - CONFIG_PPPOATM
+  USB support  --->
+   [*] Support for Host-side USB - CONFIG_USB
+   [*] USB device filesystem - CONFIG_USB_DEVICEFS
+   [M] (O or U)HCI HCD support
+   USB DSL modem support  ---> 
+    [M] USB DSL modem support - CONFIG_USB_ATM
+    [M] Speedtouch USB support - CONFIG_USB_SPEEDTOUCH
+
+
+
+Troubleshooting
+===============
+
+Try "emerge speedtouch-usb" again, because the ebuild checks that the
+required kernel modules are present (showing a warning message if
+appropriate), and creates the firmware files and symlinks in
+/lib/firmware/
+
+If the modem is unresponsive, then run "/etc/init.d/net.ppp0 stop" and
+unplug the modem for 30 seconds, to drain its memory. Then reconnect
+the modem to the PC and run "/etc/init.d/net.ppp0 start"
+
+To check the modem's connection progress, run:
+  tail -f /var/log/messages
+/var/log/messages should show e.g.:
+
+usb n-n: new full speed USB device using xxxx_hcd and address n
+usb n-n: found stage 1 firmware speedtch-1.bin
+usb n-n: found stage 2 firmware speedtch-2.bin
+pppd[nnn]: Plugin pppoatm.so loaded.
+pppd[nnn]: pppd n.n.n started by root, uid 0
+pppd[nnn]: Using interface ppp0
+pppd[nnn]: Connect: ppp0 <--> n.nn
+ADSL line is synchronising
+DSL line goes up
+ADSL line is up (nnn Kib/s down | nnn Kib/s up)
+pppd[nnn]: CHAP authentication succeeded
+pppd[nnn]: local  IP address nnn.nnn.nnn.nnn
+pppd[nnn]: remote IP address nnn.nnn.nnn.nnn
+
+
+If the authentification fails, then check username_ppp0 and
+password_ppp0.
+
+If the ADSL connection is not established, then check the options in
+pppd_ppp0. "man pppd" explains all the options in that file.
+
+If the ADSL connection seems to have worked, but no websites can be
+contacted, then check that /etc/resolv.conf is populated, and possibly
+add the "usepeerdns" option to pppd_ppp0, along with running:
+  ln -s /etc/resolv.conf /etc/ppp/resolv.conf
+
+If the problem is still not resolved, then describe the problem in the
+"discussion and bugs" tab at:
+  http://gentoo-wiki.com/HOWTO_Speedtouch_modem
+Or post to the Gentoo Forums at http://forums.gentoo.org/ - ultimately,
+if there is no answer, then file a bug at http://bugs.gentoo.org/
+
+
+Compression
+===========
+
+Some ISPs require compression to be disabled in order for the
+connection to work, so the default configuration described above
+disables compression. Few ISPs support ADSL compression anyway. If you
+are lucky enough to have an ISP which *does* support compression
+(Google is your best friend for determining this), then compression can
+be enabled by following these steps:
+
+* Compile the kernel modules CONFIG_PPP_DEFLATE and CONFIG_PPP_BSDCOMP
+(only one is strictly necessary - pppd prefers "deflate" compression).
+Add them to /etc/modules.autoload.d/kernel-2.6 or /etc/conf.d/net above
+the "pppoatm" line, if they are not built-in.
+* Remove the following options in pppd_ppp0:
+  noaccomp nobsdcomp noccp nodeflate nopcomp novj novjccomp
+* Ensure that "debug" is in the pppd_ppp0 options, to check that
+compression is being utilized. Note that "module registered" in
+/var/log/messages only confirms that the kernel module is loaded - 
+it does not indicate that the connection is compressed.
+
+
+Links
+=====
+
+Gentoo wiki:          http://gentoo-wiki.com/HOWTO_Speedtouch_modem
+SpeedTouch ebuilds:   http://packages.gentoo.org/search/?sstring=speedtouch
+SpeedTouch hardware:  http://www.speedtouch.com/support.htm
+SpeedTouch firmware:  http://www.speedtouch.com/driver_upgrade_lx_3.0.1.2.htm
diff --git a/net-dialup/speedtouch-usb/files/digest-speedtouch-usb-3.0.1.2 b/net-dialup/speedtouch-usb/files/digest-speedtouch-usb-3.0.1.2
new file mode 100644
index 000000000000..d51893105db5
--- /dev/null
+++ b/net-dialup/speedtouch-usb/files/digest-speedtouch-usb-3.0.1.2
@@ -0,0 +1 @@
+MD5 2551ce46ef785642f2c6768511f70ff3 SpeedTouch330_firmware_3012.zip 769125
diff --git a/net-dialup/speedtouch-usb/files/speedtch.usermap b/net-dialup/speedtouch-usb/files/speedtch.usermap
new file mode 100644
index 000000000000..c9079e764232
--- /dev/null
+++ b/net-dialup/speedtouch-usb/files/speedtch.usermap
@@ -0,0 +1,2 @@
+# usb module         match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
+speedtch           0x0003      0x06b9   0x4061    0x0000       0x00         0x00         0x00            0x00            0x00            0x00               0x00000000         "Alcatel SpeedTouch USB"
diff --git a/net-dialup/speedtouch-usb/metadata.xml b/net-dialup/speedtouch-usb/metadata.xml
new file mode 100644
index 000000000000..ad9105084891
--- /dev/null
+++ b/net-dialup/speedtouch-usb/metadata.xml
@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+<herd>net-dialup</herd>
+<longdescription>Firmware and configuration instructions for the kernel-space driver for Alcatel SpeedTouch USB modems.</longdescription>
+</pkgmetadata>
diff --git a/net-dialup/speedtouch-usb/speedtouch-usb-3.0.1.2.ebuild b/net-dialup/speedtouch-usb/speedtouch-usb-3.0.1.2.ebuild
new file mode 100644
index 000000000000..15a1145484be
--- /dev/null
+++ b/net-dialup/speedtouch-usb/speedtouch-usb-3.0.1.2.ebuild
@@ -0,0 +1,124 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/speedtouch-usb/speedtouch-usb-3.0.1.2.ebuild,v 1.1 2006/03/18 20:10:52 mrness Exp $
+
+inherit eutils linux-info
+
+DESCRIPTION="Firmware and configuration instructions for the kernel-space driver for Alcatel SpeedTouch USB modems"
+HOMEPAGE="http://www.speedtouch.com/"
+SRC_URI="http://www.speedtouch.com/download/drivers/USB/SpeedTouch330_firmware_${PV//./}.zip"
+
+# Taken from http://www.speedtouch.com/driver_upgrade_lx_3.0.1.2.htm
+LICENSE="SpeedTouch-USB-Firmware"
+SLOT="0"
+KEYWORDS="~x86"
+IUSE=""
+
+# udev replaces hotplug, as mentioned at 
+# http://www.linux-usb.org/SpeedTouch/firmware/firmware.html
+# hotplug only needs to be *installed*, to create /etc/hotplug/usb/ - it does
+# not need to be running.
+
+RDEPEND=">=net-dialup/ppp-2.4.3-r11
+	>=sys-apps/hotplug-20040923-r1
+	>=sys-fs/udev-079-r1
+	!net-dialup/speedtouch"
+DEPEND="${RDEPEND}
+	app-arch/unzip"
+
+S="${WORKDIR}"
+
+pkg_setup() {
+	linux-info_pkg_setup
+
+	if kernel_is lt 2 6 10 ; then
+		eerror "The kernel-space driver exists only in kernels >= 2.6.10."
+		eerror "Please emerge net-dialup/speedtouch instead or upgrade the kernel."
+		die "Unsupported kernel version"
+	fi
+
+	if ! has_version '>=sys-apps/baselayout-1.12.0_pre16' ; then
+		ewarn "The best way of using speedtouch driver is through pppd net module of the"
+		ewarn ">=sys-apps/baselayout-1.12.0_pre16 package, which is also the only"
+		ewarn "documented mode of using ${CATEGORY}/${PN}."
+		ewarn "Please install baselayout-1.12.0_pre16 or else you will be on your own!"
+		ebeep
+	fi
+}
+
+src_install() {
+	local FILE_VER="${PV#*.}"
+	FILE_VER="${PV%%.*}.${FILE_VER//./}"  # {major_ver}.{minor_digits}
+
+	# Extract the "stage 1" portion of the firmware
+	dd if=KQD6_${FILE_VER} of=speedtch-1.bin.2 \
+		ibs=1 obs=991 count=991 skip=36 &> /dev/null \
+		|| die "Extraction of stage 1 firmware (step 1) failed"
+
+	dd if=ZZZL_${FILE_VER} of=speedtch-1.bin.4 \
+		ibs=1 obs=935 count=935 skip=32 &> /dev/null \
+		|| die "Extraction of stage 1 firmware (step 2) failed"
+
+	# Extract the "stage 2" portion of the firmware
+	dd if=KQD6_${FILE_VER} of=speedtch-2.bin.2 \
+		ibs=1 obs=762650 count=762650 skip=1027 &> /dev/null \
+		|| die "Extraction of stage 2 firmware (step 1) failed"
+
+	dd if=ZZZL_${FILE_VER} of=speedtch-2.bin.4 \
+		ibs=1 obs=775545 count=775545 skip=967 &> /dev/null \
+		|| die "Extraction of stage 2 firmware (step 2) failed"
+
+	# Copy to the firmware directory
+	insinto /lib/firmware
+	insopts -m 600
+	doins speedtch-{1,2}.bin.{2,4} || die "doins firmware failed"
+
+	# Symlinks for other revisions of the modem
+	cd "${D}/lib/firmware"
+	for n in 1 2 ; do
+		for rev in 0 1 ; do
+			ln -sfn speedtch-${n}.bin.2 speedtch-${n}.bin.${rev}
+		done
+		# Seems like a reasonable guess, for revision 3
+		ln -sfn speedtch-${stub}${n}.bin.4 speedtch-${n}.bin.3
+	done
+
+	insinto /etc/hotplug/usb
+	insopts -m 644
+	doins "${FILESDIR}/speedtch.usermap" || die "doins usermap failed"
+
+	# The documentation necessary to complete the setup
+	dodoc "${FILESDIR}/README" || die "dodoc failed"
+}
+
+pkg_postinst() {
+	[[ -e /etc/hotplug/usb.usermap ]] && egrep -q " 0x06[bB]9 +0x4061 " /etc/hotplug/usb.usermap && \
+		ewarn "Please remove the SpeedTouch line from /etc/hotplug/usb.usermap"
+
+	#Check kernel configuration
+	CONFIG_CHECK="~FW_LOADER ~NET ~PACKET ~ATM ~NETDEVICES \
+		~PPP ~PPPOATM ~ATM_BR2684 ~USB_DEVICEFS ~USB_ATM ~USB_SPEEDTOUCH"
+	check_extra_config
+	einfo "Note: All the above kernel configurations are required except the following:"
+	einfo "   - CONFIG_ATM_BR2684 is needed only for PPPoE links, while"
+	einfo "   - CONFIG_PPPOATM is needed only for PPPoA links."
+	echo
+
+	# Check user space for PPPoA support
+	if ! built_with_use net-dialup/ppp atm ; then
+		eerror "PPPoA support: net-dialup/ppp should be built with 'atm' USE flag enabled!"
+		ewarn "Run the following command if you need PPPoA support:"
+		einfo "  euse -E atm && emerge net-dialup/ppp"
+		echo
+	fi
+	# Check user space PPPoE support
+	if ! has_version net-misc/br2684ctl ; then
+		eerror "PPPoE support: net-misc/br2684ctl is not installed!"
+		ewarn "Run the following command if you need PPPoE support:"
+		einfo "   emerge net-misc/br2684ctl"
+		echo
+	fi
+
+	ewarn "To complete the installation, you must read the documentation available in"
+	ewarn "   ${ROOT}usr/share/doc/${PF}"
+}