Initial version of pptp ebuild.

5 files changed, 157 insertions, 0 deletions

diff --git a/net-dialup/pptpd/ChangeLog b/net-dialup/pptpd/ChangeLog
new file mode 100644
index 000000000000..499a81acdd61
--- /dev/null
+++ b/net-dialup/pptpd/ChangeLog
@@ -0,0 +1,14 @@
+# ChangeLog for net-dialup/pptpd
+# Copyright 2002 Gentoo Technologies, Inc.; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/pptpd/ChangeLog,v 1.1 2002/05/22 19:53:45 ashmodai Exp $
+
+*pptpd-1.1.2 (22 May 2002)
+
+   5 May 2002; Mike Jones <ashmodai@gentoo.org> ChangeLog, pptpd-1.1.2.ebuild: 
+   
+   Added initial ChangeLog which should be updated whenever the package is
+   updated in any way. This changelog is targetted to users. This means that the
+   comments should well explained and written in clean English. The details about
+   writing correct changelogs are explained in the skel.ChangeLog file which you
+   can find in the root directory of the portage repository.
+	   
diff --git a/net-dialup/pptpd/files/digest-pptpd-1.1.2 b/net-dialup/pptpd/files/digest-pptpd-1.1.2
new file mode 100644
index 000000000000..8c9f975d30c4
--- /dev/null
+++ b/net-dialup/pptpd/files/digest-pptpd-1.1.2
@@ -0,0 +1 @@
+MD5 03f7106c6fd7f22bd904b5c66aedbe92 pptpd-1.1.2.tar.gz 115418
diff --git a/net-dialup/pptpd/files/options.pptpd b/net-dialup/pptpd/files/options.pptpd
new file mode 100644
index 000000000000..cfbbd01231f3
--- /dev/null
+++ b/net-dialup/pptpd/files/options.pptpd
@@ -0,0 +1,20 @@
+## SAMPLE ONLY
+## CHANGE TO SUIT YOUR SYSTEM
+
+## turn pppd syslog debugging on
+#debug
+
+## change 'servername' to whatever you specify as your server name in chap-secrets
+name pptp-server
+
+auth
+require-chap
+proxyarp
+lock
++chap
++chapms
++chapms-v2
+mppe-40
+mppe-128
+mppe-stateless
+
diff --git a/net-dialup/pptpd/files/pptpd.conf b/net-dialup/pptpd/files/pptpd.conf
new file mode 100644
index 000000000000..690ffd77ded6
--- /dev/null
+++ b/net-dialup/pptpd/files/pptpd.conf
@@ -0,0 +1,84 @@
+################################################################################
+#
+# Sample PoPToP configuration file
+#
+# for PoPToP version 1.0.0
+#
+################################################################################
+
+# TAG: speed
+#
+#	Specifies the speed for the PPP daemon to talk at.
+#	Some PPP daemons will ignore this value.
+#
+#speed 115200
+
+# TAG: option
+#
+#	Specifies the location of the PPP options file.
+#	By default PPP looks in '/etc/ppp/options'
+#
+option /etc/ppp/options.pptpd
+
+# TAG: debug
+#
+#	Turns on (more) debugging to syslog.
+#
+#debug
+
+# TAG: localip
+# TAG: remoteip
+#
+#	Specifies the local and remote IP address ranges.
+#
+#	You can specify single IP addresses seperated by commas or you can
+#	specify ranges, or both. For example:
+#
+#		192.168.0.234,192.168.0.245-249,192.168.0.254
+#
+#	IMPORTANT RESTRICTIONS:
+#
+#	1. No spaces are permitted between commas or within addresses.
+#
+#	2. If you give more IP addresses than MAX_CONNECTIONS, it will
+#	   start at the beginning of the list and go until it gets 
+#	   MAX_CONNECTIONS IPs. Others will be ignored.
+#
+#	3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
+#	   you must type 234-238 if you mean this.
+#
+#	4. If you give a single localIP, that's ok - all local IPs will
+#	   be set to the given one. You MUST still give at least one remote
+#	   IP for each simultaneous client.
+#
+#localip 192.168.0.234-238,192.168.0.245
+#remoteip 192.168.1.234-238,192.168.1.245
+
+# TAG: ipxnets
+#
+#	This gives the range of IPX networks to allocate to clients.  By
+#	default IPX network number allocation is not handled internally.
+#	By putting a low and high network number here a pool of IPX networks
+#	can be defined.  If this is done then there must be one IPX network
+#	per client.
+#
+#	The format is a pair of hex numbers without any 0x prefix separated
+#	by a hyphen.
+#
+#ipxnets 00001000-00001FFF
+
+# TAG: listen
+#
+#	Defines the IP address of the local interface on which pptpd
+#	should listen for connections.  The default is to listen on all
+#	local interfaces (even ones brought up by pptp connections, thus
+#	permitting pptp tunnels inside the pptp tunnels).
+#
+#listen 192.168.0.1
+
+# TAG: pidfile
+#
+#	This defines the file name in which pptpd should store its process
+#	ID (or pid).  The default is /var/run/pptpd.pid.
+#
+#pidfile /var/run/pptpd.pid
diff --git a/net-dialup/pptpd/pptpd-1.1.2.ebuild b/net-dialup/pptpd/pptpd-1.1.2.ebuild
new file mode 100644
index 000000000000..47aaaa5457ea
--- /dev/null
+++ b/net-dialup/pptpd/pptpd-1.1.2.ebuild
@@ -0,0 +1,38 @@
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License, v2 or later
+# Author Mike Jones <ashmodai@gentoo.org>
+
+S=${WORKDIR}/pptpd-1.1.2
+DESCRIPTION="Linux Point-to-Point Tunnelling Protocol Server"
+SRC_URI="http://www.mirrors.wiretapped.net/security/network-security/poptop/pptpd-1.1.2.tar.gz"
+HOMEPAGE="http://poptop.lineo.com"
+DEPEND="virtual/glibc
+        virtual/pppd" 
+
+LICENSE="GPL"
+RDEPEND=""
+SLOT="0"
+
+src_compile() {
+		econf || die	
+		emake || die
+}
+
+src_install () {
+	
+	make 					\
+		DESTDIR=${D}			\
+		man_prefix=/usr/share/man	\
+		install || die
+
+    insinto /etc
+	doins ${FILESDIR}/pptpd.conf
+	insinto /etc/ppp
+	dodir /etc/ppp
+	insinto /etc/ppp
+	doins ${FILESDIR}/options.pptpd
+
+	dodoc README README.inetd README.slirp AUTHORS COPYING INSTALL TODO ChangeLog
+	docinto samples; dodoc samples/*
+}
+