net-analyzer/snort: drop 2.9.17

Signed-off-by: Sam James <sam@gentoo.org>

1 files changed, 0 insertions, 247 deletions

diff --git a/net-analyzer/snort/snort-2.9.17.ebuild b/net-analyzer/snort/snort-2.9.17.ebuild
deleted file mode 100644
index ba2c56393269..000000000000
--- a/net-analyzer/snort/snort-2.9.17.ebuild
+++ /dev/null
@@ -1,247 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-LUA_COMPAT=( luajit )
-
-inherit autotools lua-single systemd tmpfiles
-
-DESCRIPTION="The de facto standard for intrusion detection/prevention"
-HOMEPAGE="https://www.snort.org"
-SRC_URI="https://www.snort.org/downloads/archive/${PN}/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-
-KEYWORDS="~amd64 ~arm ~arm64 ~mips ~ppc ~ppc64 ~sparc ~x86"
-IUSE="+active-response control-socket debug file-inspect +flexresp3 +gre
-high-availability inline-init-failopen large-pcap-64bit +libtirpc
-linux-smp-stats +non-ether-decoders open-appid +perfprofiling +ppm +react
-reload-error-restart selinux shared-rep side-channel sourcefire +threads"
-
-DEPEND="acct-user/snort
-	acct-group/snort
-	dev-libs/libdnet
-	>=dev-libs/libpcre-8.33
-	net-libs/libnsl:0=
-	>=net-libs/libpcap-1.3.0
-	sys-libs/zlib
-	!libtirpc? ( sys-libs/glibc[rpc(-)] )
-	libtirpc? ( net-libs/libtirpc )
-	open-appid? ( ${LUA_DEPS} )"
-BDEPEND=">=net-libs/daq-2.0.2"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-snort )"
-
-REQUIRED_USE="!kernel_linux? ( !shared-rep )
-	open-appid? ( ${LUA_REQUIRED_USE} )"
-
-PATCHES=(
-	"${FILESDIR}/${PN}-2.9.8.3-no-implicit.patch"
-	"${FILESDIR}/${PN}-2.9.8.3-rpc.patch"
-	"${FILESDIR}/${PN}-2.9.12-snort.pc.patch"
-)
-
-pkg_setup() {
-	use open-appid && lua-single_pkg_setup
-}
-
-src_prepare() {
-	default
-
-	mv configure.{in,ac} || die
-
-	# USE=debug exposes a macro whose name apparently wasn't changed
-	sed -i -e 's/BEFORE_SRV_FAIL/BEFORE_SERVICE_FAIL/' \
-		src/dynamic-preprocessors/appid/appInfoTable.c || die
-
-	AT_M4DIR=m4 eautoreconf
-}
-
-src_configure() {
-	econf \
-		$(use_enable gre) \
-		$(use_enable control-socket) \
-		$(use_enable file-inspect) \
-		$(use_enable high-availability ha) \
-		$(use_enable non-ether-decoders) \
-		$(use_enable shared-rep) \
-		$(use_enable side-channel) \
-		$(use_enable sourcefire) \
-		$(use_enable ppm) \
-		$(use_enable perfprofiling) \
-		$(use_enable linux-smp-stats) \
-		$(use_enable inline-init-failopen) \
-		$(use_enable open-appid) \
-		$(use_enable threads pthread) \
-		$(use_enable debug) \
-		$(use_enable debug debug-msgs) \
-		$(use_enable debug corefiles) \
-		$(use_enable !debug dlclose) \
-		$(use_enable active-response) \
-		$(use_enable reload-error-restart) \
-		$(use_enable react) \
-		$(use_enable flexresp3) \
-		$(use_enable large-pcap-64bit large-pcap) \
-		$(use_with libtirpc) \
-		--enable-mpls \
-		--enable-normalizer \
-		--enable-reload \
-		--enable-targetbased \
-		--disable-build-dynamic-examples \
-		--disable-profile \
-		--disable-ppm-test \
-		--disable-intel-soft-cpm \
-		--disable-static-daq \
-		--disable-static \
-		--disable-so-with-static-lib
-}
-
-src_install() {
-	default
-
-	keepdir /var/log/snort \
-		/etc/snort/rules \
-		/etc/snort/so_rules \
-		/usr/$(get_libdir)/snort_dynamicrules
-
-	# config.log and build.log are needed by Sourcefire
-	# to trouble shoot build problems and bug reports so we are
-	# perserving them incase the user needs upstream support.
-	dodoc RELEASE.NOTES ChangeLog \
-		doc/* \
-		tools/u2boat/README.u2boat
-
-	insinto /etc/snort
-	doins etc/attribute_table.dtd \
-		etc/classification.config \
-		etc/gen-msg.map \
-		etc/reference.config \
-		etc/threshold.conf \
-		etc/unicode.map
-
-	# We use snort.conf.distrib because the config file is complicated
-	# and the one shipped with snort can change drastically between versions.
-	# Users should migrate setting by hand and not with etc-update.
-	newins etc/snort.conf snort.conf.distrib
-
-	# config.log and build.log are needed by Sourcefire
-	# to troubleshoot build problems and bug reports so we are
-	# preserving them incase the user needs upstream support.
-	if [ -f "${WORKDIR}/${PF}/config.log" ]; then
-		dodoc "${WORKDIR}/${PF}/config.log"
-	fi
-	if [ -f "${T}/build.log" ]; then
-		dodoc "${T}/build.log"
-	fi
-
-	insinto /etc/snort/preproc_rules
-	doins preproc_rules/decoder.rules \
-		preproc_rules/preprocessor.rules \
-		preproc_rules/sensitive-data.rules
-
-	fowners -R snort:snort \
-		/var/log/snort \
-		/etc/snort
-
-	newinitd "${FILESDIR}/snort.rc12" snort
-	newconfd "${FILESDIR}/snort.confd.2" snort
-	systemd_newunit "${FILESDIR}/snort_at.service" "snort@.service"
-
-	newtmpfiles "${FILESDIR}"/snort.tmpfiles snort.conf
-
-	# Sourcefire uses Makefiles to install docs causing Bug #297190.
-	# This removes the unwanted doc directory and rogue Makefiles.
-	rm -rf "${ED}"/usr/share/doc/snort || die "Failed to remove SF doc directories"
-	rm "${ED}"/usr/share/doc/"${PF}"/Makefile* || die "Failed to remove doc make files"
-
-	# Remove unneeded .la files (Bug #382863)
-	find "${ED}" -name '*.la' -type f -delete || die
-
-	# Set the correct lib path for dynamicengine, dynamicpreprocessor, and dynamicdetection
-	sed -i -e 's|/usr/local/lib|/usr/'$(get_libdir)'|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Set the correct rule location in the config
-	sed -i -e 's|RULE_PATH ../rules|RULE_PATH /etc/snort/rules|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Set the correct preprocessor/decoder rule location in the config
-	sed -i -e 's|PREPROC_RULE_PATH ../preproc_rules|PREPROC_RULE_PATH /etc/snort/preproc_rules|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Enable the preprocessor/decoder rules
-	sed -i -e 's|^# include $PREPROC_RULE_PATH|include $PREPROC_RULE_PATH|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	sed -i -e 's|^# dynamicdetection directory|dynamicdetection directory|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Just some clean up of trailing /'s in the config
-	sed -i -e 's|snort_dynamicpreprocessor/$|snort_dynamicpreprocessor|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Make it clear in the config where these are...
-	sed -i -e 's|^include classification.config|include /etc/snort/classification.config|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	sed -i -e 's|^include reference.config|include /etc/snort/reference.config|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Disable all rule files by default.
-	sed -i -e 's|^include $RULE_PATH|# include $RULE_PATH|g' \
-		"${ED%}/etc/snort/snort.conf.distrib" || die
-
-	# Set the configured DAQ to afpacket
-	sed -i -e 's|^# config daq: <type>|config daq: afpacket|g' \
-		"${ED%}/etc/snort/snort.conf.distrib" || die
-
-	# Set the location of the DAQ modules
-	sed -i -e 's|^# config daq_dir: <dir>|config daq_dir: /usr/'$(get_libdir)'/daq|g' \
-		"${ED%}/etc/snort/snort.conf.distrib" || die
-
-	# Set the DAQ mode to passive
-	sed -i -e 's|^# config daq_mode: <mode>|config daq_mode: passive|g' \
-		"${ED%}/etc/snort/snort.conf.distrib" || die
-
-	# Set snort to run as snort:snort
-	sed -i -e 's|^# config set_gid:|config set_gid: snort|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-	sed -i -e 's|^# config set_uid:|config set_uid: snort|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Set the default log dir
-	sed -i -e 's|^# config logdir:|config logdir: /var/log/snort/|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-
-	# Set the correct so_rule location in the config
-	sed -i -e 's|SO_RULE_PATH ../so_rules|SO_RULE_PATH /etc/snort/so_rules|g' \
-		"${ED}/etc/snort/snort.conf.distrib" || die
-}
-
-pkg_postinst() {
-	tmpfiles_process snort.conf
-
-	einfo "There have been a number of improvements and new features"
-	einfo "added to ${P}. Please review the RELEASE.NOTES and"
-	einfo "ChangLog located in /usr/share/doc/${PF}."
-	einfo
-	elog "The Sourcefire Vulnerability Research Team (VRT) recommends that"
-	elog "users migrate their snort.conf customizations to the latest config"
-	elog "file released by the VRT. You can find the latest version of the"
-	elog "Snort config file in /etc/snort/snort.conf.distrib."
-	elog
-	elog "!! It is important that you migrate to this new snort.conf file !!"
-	elog
-	elog "This version of the ebuild includes an updated init.d file and"
-	elog "conf.d file that rely on options found in the latest Snort"
-	elog "config file provided by the VRT."
-
-	if use debug; then
-		elog "You have the 'debug' USE flag enabled. If this has been done to"
-		elog "troubleshoot an issue by producing a core dump or a back trace,"
-		elog "then you need to also ensure the FEATURES variable in make.conf"
-		elog "contains the 'nostrip' option."
-	fi
-}